Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Dipping reflector pivot used on Lucas two piece dipping reflectors. Spring steel 'P' clip and ball bearing holds inner refector bowl and outer reflector rim togther, allowing the inner reflector...
614.17267Hiqh quality clamp for tightening the bulb holder socket in the back of Lucas lamp refectors onto BA15 bulb holders (e.g. our part numbers 853 or 153). The clip strap is formed from steel and...
609.05786Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 52mm diameter with 1mm recess around the edge which is 2.8mm thick, total thickness...
516.4993Angled rubber red reflector, equivalent to Lucas type RER2, for mounting on to sloping rear wings etc. Base measure approx 74mm diameter. We have a limited stock of original Lucas manufactured...
499.9816Angled rubber red reflector, equivalent to Lucas type RER2, for mounting on to sloping rear wings etc. Base measure approx 74mm diameter. We have a limited stock of original Lucas manufactured...
499.9816Angled rubber red reflector, equivalent to Lucas type RER2, for mounting on to sloping rear wings etc. Base measure approx 74mm diameter. We have a limited stock of original Lucas manufactured...
Red reflector disc, 40mm diameter, will fit our 394, 167, 872 and 240 reflectors.
498.9701Amber reflector disc, 40mm diameter, alternative to red disc, will fit our 394, 167, 872 and 240 reflectors.
497.84482Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 52mm diameter with 1mm recess around the edge which is 2.8mm thick, total thickness...
464.4365Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 40mm diameter with 1mm recess around the edge which is 2.1mm thick, total thickness...
464.4365Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 54mm diameter with 1mm recess around the edge which is 2.2mm thick, total thickness...
464.4365Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 57mm diameter with 2mm recess around the edge which is 3mm thick, total thickness 6mm....
464.4365Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep amber glass, 57mm diameter with 2mm recess around the edge which is 3mm thick, total thickness 6mm....
464.4365E marked red rear reflector on black plastic mounting plate with 10mm long M6 stud supplied complete with nut and washer.
436.9582E marked red rear reflector on black plastic mounting plate with 10mm long M5 stud supplied complete with nut and washer.
436.9582Large flat back rubber surround reflector approx 90mm diameter. Screw fixing around edge, for those who want reflectors that can be seen. Particularly suits commercial applications
419.72223Plated dish reflector to assist with light reflection in rubber divers lamp, overall diameter 55mm with 14mm hole in the centre.
400.33163Return spring for dipping reflectors used on Lucas lamps including the L150. Extension spring. 48mm long, 6.25mm diameter with one closed loop end and one open loop end. Please check dimensions...
Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
333.04016Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
Red...
Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
Red...
Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
Red...
Red reflector, diameter 58mm, integral threaded stud fixing.
Rear red reflector with metal surround with rear mounting stud and nut supplied. Approx 42mm diameter.
Large rimmed reflector, with chrome rim, approx 71mm diameter overall. Single centre M5 screw fitting. Equivalent to Lucas type RER14. Rubber backing has slight curve to follow radius of panel.
331.114Re-manufactured Lucas type reflector with metal surround (42mm dia) and stepped steel mounting bracket. Aluminium spinning with black metal painted side mounting bracket (7mm hole)
331.114Large rimmed reflector, with nickel rim, approx 71mm diameter overall. Single centre screw fitting. Equivalent to Lucas type RER14. Rubber backing has slight curve to follow radius of panel
331.114Flat rubber surround for vertical surfaces equivalent to Lucas type RER6. Self tapping screw for mounting supplied, approx 48mm base diameter.
330.46036Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
276.8688Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
276.8688Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
276.8688Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
276.8688Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Premium high power LED lens lamp upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and...
Premium high power LED lens lamp upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and...
230.16895High quality 16 x transverse Cree 2525 (with Hotsink) LED upgrade for SINGLE CONTACT American Pre-focus head and spot lamp bulbs from the '30s and '40s with the P15S 30 base. Extremely flexible...
High quality 16 x transverse Cree 2525 (with heatsink) LED upgrade for SINGLE CONTACT American Pre-focus head and spot lamp bulbs from the '30s and '40s with the P15S 30 base. Extremely flexible...
High quality 12 (6 per side) x Cree 2525 (with Hotsink) LED upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 double contact base. Extremely flexible...
Double contact headlamp converter for most many headlamps which are mounted through the rear of reflector bowl - usually held in place in the bulb holder socket on Lucas reflectors with clamp clip...
81.30849Two piece spun brass assembly, to replace damaged BA15 bulb holder sockets on vintage lamp reflectors. Remove old damaged bulb holder socket and then press fit new assembly together either side of...
78.018364Compact two position switch suitable for dash mounting. A quality reproduction switch equivalent to Lucas part number 9RW (380417) originally offered with a plain black cover (or with a cover...
Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
52.506966Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
52.506966Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
52.506966Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
52.506966Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
52.444782Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
52.444782Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
52.444782Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
52.444782Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
52.444782Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
52.444782Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
52.444782A neat rubber side bolt mounted indicator lamp, moulded to match the original Rubbolite 25 lamp, without any side lens (for number plate illumination). Supplied with a domed amber lens as standard...
49.722137All glass red lens for 211 part number series 'Duolamp' type rear lamps. Embossed with 'STOP' script on top section.
49.722137Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require.
49.722137Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require.
Domed red lens
Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require.
Domed amber lens
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
49.624947Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
49.624947Small panel mount warning lamp with metal rim which unscrews to change bulb. 13.4mm diameter, push fit into a 13.4mm panel hole. twin wires to rear.
order BA7 bulb separately if required
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
48.12899Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
48.12899Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
48.12899Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
48.12899Headlamp EPDM rim seal for many Lucas lamps including the L140, L148, L150 and L165 and L166. The flap locates in the 3mm wide groove in the bowl rim, behind where the reflector (bead type, rather...
47.778385Smiths type lamp badge medallion. 16mm diameter across the top 15mm approx below lip, fits into a 15mm hole. Marked Smiths across the top and London at the bottom, MA in a circle in the centre,...
45.921318Body to base gasket for Lucas type ST51 'D' Lamps - our part number series, 428, 249 and CA1149
45.921318Replacement acrylic red lens (equivalent to Lucas part number 523307) for the Lucas 288-3 rear number plate lamp/light box assembly. Dimensions 95mm wide x 67mm tall.
45.921318Replacement red split glass lens for ST51 type 'D' lamps, our part numbers 249A and 428A
45.921318Clear side lens for number plate window for Lucas type ST51 type 'D' Lamps - our part numbers 249, 249A, 428, 428A, CA1149B and CA1149C
45.921318Rubber lamp entry cable grommet. Approximately 13.5mm internal diameter.
45.921318'Red dot' tell tale medallion for original and reproduction Lucas type 1130, 1142, LD109 etc. side lamps. Dimension at top 13.5mm diameter, 6.25mm deep, 12.5mm diameter at base to push fit into a...
Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...
45.921318Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...
45.921318Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...
45.921318Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...
45.921318Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...
45.921318Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...
45.921318Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
45.921318Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
45.921318Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
45.921318Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
45.921318Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
45.921318Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
45.921318Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
45.921318Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available.
45.921318Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available.
Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available.
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
45.921318Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
Amber spare lens
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
Red spare lens
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
Clear spare lens
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require.
45.921318Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require.
Flat red lens
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require.
Flat amber lens
Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number 516173....
Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number 505975....
45.921318Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number L215. 9...
Replacement acrylic red and white lens (equivalent to Lucas part number 523308) for the Lucas 288-3 rear number plate lamp/light box assembly. Dimensions 95mm wide x 67mm tall.
45.921318Desmo bronze badge/medallion, 19mm in diameter with a 2mm rivet hole in the centre. Marked 'Desmo' across the top, with winged car motif in the centre and 'Birmingham' across the bottom, available...
45.921318Desmo bronze badge/medallion, 19mm in diameter with a 2mm rivet hole in the centre. Marked 'Desmo' across the top, with winged car motif in the centre and 'Birmingham' across the bottom, available...
45.921318Desmo bronze badge/medallion, 19mm in diameter with a 2mm rivet hole in the centre. Marked 'Desmo' across the top, with winged car motif in the centre and 'Birmingham' across the bottom, available...
45.921318Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 551308. 7 13/16" diameter. Suitable for Lucas type lamps L140, L148, LD147,...
Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 551093. 8 1/2" diameter. Suitable for Lucas type lamps L150, LBD150, MBD150 and...
Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 507163 or 504525. 9 1/8" diameter. Suitable for Lucas type lamps L166, LD165,...
Highly polished stainless steel lamp rim, for split lens red/red or red/amber 'Duolamps' (our part number series 211RR/RA)
45.921318Highly polished stainless steel lamp rim for single (equal waisted) 'Duolamp' type lamps (our part number series CA1265)
45.921318Highly polished stainless steel lamp rim for single (unequal, waisted) lens 'Duolamp' type lamps (our part number series CA1266)
45.921318High quality plain red glass lens for part number series CA1266 'Duolamp' type stop and tail rear lamps with a plain (unequal waisted) lens.
45.921318Quality clear glass side lens for the number plate illumination cut out on 'Duolamp' type rear lamps - see part number series lamps CA1265, CA1266 and 211R.
45.921318High quality plain red glass lens for 958 and CA1265 part number series 'Duolamp' type lamps with a single (equal waisted) red lens.
45.921318Domed, pressed glass lens with 1/4" wide flutes in the lower half of the lens, below and around the clear centre and clear upper half. Equivalent to Lucas part number 504224. 7 3/4" diameter....
45.921318Replacement large plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Please note these lenses will only fit our lamps,...
Replacement large plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Please note these lenses will only fit our lamps,...
Replacement large plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Please note these lenses will only fit our lamps,...
Rubber lens 'O' ring seal for Lucas 1130 type sidelamps (297 series lamps) fitted with the plastic lens (part number 361).
45.03907Recessed lamp (approx 72mm diam) - rubber boot/body, chrome rim, clear glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Panel hole for fixing 35mm. Supplied with a BAY15D...
Recessed lamp - rubber boot/body (approx 74mm diam) chrome rim, clear glass lens (25mm depth from mount panel), Lucas model L488 with flat lens, mounts through 35mm panel hole. Supplied with a...
45.03907Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
44.91233Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
44.91233Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
44.91233Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
44.91233Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
44.91233Very small chrome warning/indicator lamp with amber lens. (40mm x 25mm x 40mm depth). Please note that this unit accepts MCC BA9S bulbs, most of which do not have the watts available for 21w/42w...
44.91233Ex WD original Butler tail lamp, used on Austin Champ as a blackout side lamp, some motorcycles and vintage Bedford's, supplied in a red oxide finish the lamp is 90mm long x 58mm wide x 50mm tall,...
44.91233A pair of 7" free standing lamp with a highly polished stainless steel housing. We use the high quality Wipac Quadoptic lens that gives a fantastic light output, 7" Round Domed...
44.134327A pair 7" Free Standing Black Headlamps, satin black plastics powder coating body (ideal for painting body colour if needed) and a highly polished stainless steel rim, suitable for many classic...
44.134327Pair of small free standing headlamp unit with single mounting stem bolt, metal bucket back, all chrome, approx 150mm overall diameter. a solid and robust unit which has various applications....
44.134327Lens retaining wire for 249/428 part number series (equivalent to Lucas type ST51 type) 'D' lamps
41.082756Silver painted bronze bracket. Fits inside headlamp rim, the tongue fits through the rim slot which then accepts rim fixing screw. Dimensions 36mm x 13mm, screw tongue 17mm wide x 13mm tall with...
41.082756Butler type headlamp screw/stud and catch barrel/boss.
41.082756Hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). Approx 16mm bore. 10mm deep. 13/16" AF.
Will work with our product 629a
Brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc. type lamps. Thread 1/2" x 26 tpi. Equivalent to Lucas part number 500357
41.082756Headlamp mounting bolt - hollow, used on Butler type lamps. Thread 5/8" x 26 tpi ( ine thread). Measures approx 68mm long x 16mm thread diameter.
41.082756Headlamp mounting bolt - hollow, used on many CAV type lamps. Thread 5/8" x 26 tpi (fine thread) as original item. Measures approx 50mm long x 16mm thread diameter.
41.082756Headlamp mounting bolt - hollow, with loose collar. Thread 5/8" x 26 tpi (fine thread) as original item. Measures approx 50mm long x 16mm thread diameter.
41.082756Headlamp mounting bolt - hollow. Thread 5/8" x 26 tpi (fine thread) as the original item. measures approx 56mm long x 16mm thread diameter.
Will work with our product 632 nut
Lamp glass clip. 'W' wire clip to hold the glass into a headlamp rim - approx 36mm long. Most rims about 8" diameter use four.
41.082756Lamp glass clips. Large 'W' wire for holding glass lenses into headlamp rims, approx 54mm long side. This clip can be used for other applications but is actually made for P100 R & S type lamps.
41.082756Hexagonal nut for many Lucas type sidelamps. 7/16" x 26 tpi (very fine thread) approx 11mm bore.
41.082756Lamp mounting bolt - hollow. Thread 7/16" x 26 tpi (fine thread) as original. Measures approx 36mm long x 11mm thread diameter. Supplied with hexagon nut. Used on various Lucas spot and sidelamps.
41.082756Lamp glass clip. Large 'W' wire spring clip for holding glass lenses into headlamp rims. Approx 48mm long side with a slight curve. Useful for deep headlamp rims. Most headlamp rims use four.
41.082756Spare clear side lens for part number series 776 and CA1249 (equivalent to Lucas ST38) 'Pork Pie' type rear lamps.
41.082756Original pattern opaque glass lens with chrome rim surround for our 297 (Lucas 1130) type side lamps, overall outside diameter 47mm. Fixed in position with retaining screw part number 865 - please...
41.082756Orange plastic semaphore arm lens to fit the Lucas SF80 trafficator, part of the SE100 trafficator assembly. Equivalent to Lucas part number 532026. Overall length 180mm.
41.082756Polished stainless steel backing cover for Lucas SF80 SE100 trafficator. overall length 195mm.
41.082756Top rim stainless steel retaining screw for 297 (Lucas 1130 type) sidelamp lenses - use to retain lens part numbers 681 (glass with chrome surround) and 361C/361A (clear or amber moulded plastic).
41.082756Lamp glass clips. Small 'W' wire clip for holding lenses into rims in sidelamps. Approximately 22mm long, sold as a packet of 6 pieces
41.082756Rubber rear body (boot) for Lucas L488 model type lamps. Ford part reference E0A-13216.
41.082756Rubber rear body (boot) for Lucas L594 model type lamps.
41.082756Flat, rubber mounting pad for 297 (Lucas 1130) type sidelamps.
41.082756Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
41.082756Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
41.082756Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
41.082756Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
41.082756Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
41.082756Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
41.082756Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
41.082756Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
41.082756Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
41.082756Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
41.082756Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
41.082756Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
41.082756Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
41.082756Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
41.082756Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
41.082756Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
41.082756Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
41.082756Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
41.082756Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
41.082756Replacement red glass lens for plain ST51 type 'D' lamps, overall dimensions 67 tall x 78mm wide.
41.082756Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
41.082756Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
41.082756Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
41.082756Daisy head headlamp rim screw for the Lucas L140 & L150 headlamps, overall length 36mm (head 18mm, thread 18mm) head diameter 15mm tapering down to 9mm, with a 2BA thread. Chrome plated brass.
41.082756Replacement clear plastic sleeve lens for the number plate illumination window in 288 part number series (equivalent to Lucas L582 type) lamps.
41.082756Stainless steel lamp housing retaining screw - 4BA thread x 16mm long. Slotted and knurled head, 8mm diameter. Used on D lamps to secure the lamp housing to the back plate.
41.082756Headlamp mounting bolt and nut for Lucas P100 type lamps. Thread 1/2" x 26 tpi (fine thread) as original item. Measures approx 105mm long x 13mm thread diameter (thread runs for 28mm), head...
41.082756Rubber lens 'O' ring seal for Lucas type 1130 (297 series) sidelamps, with the glass lens with chrome surround and rim (part number 681).
41.082756A high quality round backlight crystal glass lens with a very well defined faceted prismatic pattern. Manufactured in transparent deep red glass. 40mm in diameter x 8mm maximum thickness, with a...
41.082756High quality round backlight crystal glass with faceted prismatic pattern. Manufactured in transparent deep amber glass. 40mm in diameter x 8mm maximum thick. With a flat (rather than concave)...
41.082756Long daisy head head and spot lamp rim screw for some large Lucas headlamps including the P80, overall length 49mm (head 29mm, thread 20mm) head diameter 15mm tapering down to 9mm, with a 2BA...
Compression spring for use with long rim catch part no. 863A. The spring is held in place by a small roll pin inserted through the end of the catch). Makes Lucas part no assembly 532590
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
41.082756Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
41.082756Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
41.082756Toby chrome ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR Number Plate...
41.082756Toby black ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR & Number Plate...
41.082756Black split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. fitted with...
41.082756Chrome split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function, fitted...
41.082756Knurled and slotted headlamp rim screw for Lucas L140, L150 etc. type headlamps. Overall length 33mm (head 9mm, thread length 24mm), head diameter 10mm. 2BA thread. Chrome plated brass. Offered as...
41.082756Silver painted bronze bracket. Fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw. Dimensions 36mm x 18mm, screw tongue 17mm wide x 15mm tall with 5mm slot.
41.082756Main rim gasket for our 211R series split lens 'Duolamp' type lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
41.082756Number plate lens gasket for our 211R series split lens 'Duolamp' type lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
41.082756Main rim gasket for the CA1265 series single, symmetrical lens 'Duolamp' type lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
41.082756Number plate lens gasket for our CA1265/1266 series single lens 'Duolamp' type lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
41.082756Main rim gasket for the CA1266 series single, non-symmetrical lens 'Duolamp' type lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
41.082756Red glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lenses. 40mm diameter lens with a concave back to allow fitment of a standard BA15D...
41.082756Amber glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lens. 40mm diameter lens with a concave back to allow fitment of a standard 25mm...
41.082756Painted cowl type number plate lamp with glass lens, two bolt mounting with 45mm hole centres, supplied with two cables fitted with terminals ( one bullet, one eyelet. ) and waterproof cable...
40.841194A neat rear lamp equivalent to the Rubbolite No. 25 lamp, with a single mounting point. Can also be supplied with a flat red lens (instead of the domed red lens fitted as standard) to give a lamp...
40.841194Round ruber lamp equivalent to the Rubbolite number 23 rear lamp - 91mm diameter at widest, with raised red lens and side number plate illumination lens. Fitted with two double contact bulb...
40.841194Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
40.841194Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
40.841194Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for...
40.841194Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for...
40.841194Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for...
40.841194Round rear stop and tail lamp with single flat "reflective" red glass lens. Polished stainless steel body 97mm diameter x 61mm deep (74mm including bulb holders), rear mounting bolts with 45mm...
40.841194Round rear stop and tail lamp with single flat "reflective" red glass lens. With number plate Illumination with glass lens on bottom side of tail light housing. Highly polished stainless steel...
40.841194Replacement part equivalent to Lucas type P700 (7") 'Tripod' bar headlamp reflector unit. LEFT HAND DRIVE. Offered in PAIRS only (2 pieces).
These light units feature the standard H4 P43T...
Replacement part equivalent to Lucas type P700 (7") 'Tripod' bar headlamp reflector unit. RIGHT HAND DRIVE. Offered in PAIRS only (2 pieces).
These light units feature the standard H4 P43T...
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
39.053722Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
39.053722Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
39.0537226 volt double contact BA15d 35/35 watt double filament bulb. Dimensions 35mm wide x 56mm tall with 15mm diameter cap. Use - headlight. For brighter LED upgrade options please see part...
6 volt double contact BA15d, 24/24 watt double filament bulb. dimensions 35mm wide x 56mm tall with 15mm diameter cap. Use headlight. For a brighter incandescent bulb, please see part...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...