Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
New old stock original Lucas panel lamp, part number 54057245. Marked 'Butlers England'. Butlers part number BU/1572/S. Takes a BA9S base bulb. Complete with mounting stud nuts and washers, wired...
Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim with amber glass lens (25mm depth from mounting panel). Lucas model L488 with flat lens. Mounts through 35mm panel...
456.4906New old stock genuine Lucas RF96 regulator lid, marked LUCAS ENGLAND, VOLTAGE REGULATOR, with terminal lettering A1, A, F, D, E. dimensions:- 83mm x 58mm and 72mm tall.
440.63257Angled rubber red reflector, equivalent to Lucas type RER2, for mounting on to sloping rear wings etc. Base measure approx 74mm diameter. We have a limited stock of original Lucas manufactured...
412.77002Angled rubber red reflector, equivalent to Lucas type RER2, for mounting on to sloping rear wings etc. Base measure approx 74mm diameter. We have a limited stock of original Lucas manufactured...
412.77002Angled rubber red reflector, equivalent to Lucas type RER2, for mounting on to sloping rear wings etc. Base measure approx 74mm diameter. We have a limited stock of original Lucas manufactured...
Replacement reproduction front cover (face) of our manufacture for the Lucas type 312 'Owl Eye' rear lamp. These are chrome on brass with medallion fitted. We supply these with the small red lens...
408.98727Replacement reproduction front cover (face) of our manufacture for the Lucas type 312 'Owl Eye' rear lamp. These are chrome on brass with medallion fitted. We supply these with the small red lens...
408.98727Remanufactured side lamp to the L490 pattern as used on Jaguar Mk2, early XK and Armstrong Siddeley among others (original Lucas part number 52474). Clear patterned lens with chrome rim (30mm...
Remanufactured side lamp to the L513 pattern as used on Jaguar XK150 and Daimler among others (original Lucas part number 52175). Clear patterned lens with chrome rim (45mm diameter x approx 12mm...
Clear glass sidelamp with heavy chrome rim - approximately 60mm overall diameter. Glass lens, rubber back boot supplied. Single contact BA15S bulb holder. As fitted to early Morris Minor, Land...
407.1764High quality British made reproduction of the FT27 auxilliary/fog lamp fitted to the MG TA, TB, early TC (to chassic number 4738) and MMM. Also Morgan 4/4 Series 1 1936-39. Equivalent to Lucas...
405.53656Large surface mounted 2 way switch, 2 5/8'' (67mm) diameter, three hole fixing. Well finished in black bakelite. Genuine new old stock - Lucas part number 31001.
Chromium plated rim catch, for Lucas type head lamps, short style, overall dimensions 31mm long x 27mm wide, equivalent to original Lucas part number 509936. Use with 'spectacle' wire spring clip...
405.1242Starter switch that attaches to the motor case, as Lucas model type ST9, 76439, 764150. Applicable for 6 or 12 volt applications. Ford part reference BE-11450
Original lucas trafficator switch screw down bezel/cover and lens, as fitted to the SD84 dash/panel switch. Ivory screw cover with red warning lens and washer to keep bulb from making contact with...
403.29596Recessed lamp, approximately 72mm in diameter with rubber boot and body. Chrome rim with amber glass lens 45mm deep. Equivalent to Lucas model L594 with raised lens. Panel hole for fixing 35mm....
Headlamp glass to rim rubber dust gasket for 7" Lucas 700 series type lamps. Equivalent to Lucas part number 552906.
Replacement large plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Please note these lenses will only fit our lamps,...
Replacement large plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Please note these lenses will only fit our lamps,...
Replacement large plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Please note these lenses will only fit our lamps,...
Rubber rear body (boot) for Lucas L594 model type lamps.
346.77573Flat, rubber mounting pad for 297 (Lucas 1130) type sidelamps.
346.77573Rubber rear body (boot) for Lucas L488 model type lamps. Ford part reference E0A-13216.
345.41885Small chromium plated side lamp equivalent to the Lucas type 516 (alternative part number 52463) as fitted to A30, Morgan etc. 81mm long x 32mm dia. Supplied with rubber mounting pad. Uses BA9S...
344.6624Large sidelamp equivalent to the Lucas VS45-6 type, 90mm diameter x 85mm deep, with glass lens. We offer these lamps finished with black body/chrome rim, all chrome or all nickel. Mounting bolt...
Large sidelamp equivalent to the Lucas VS45-6 type, 90mm diameter x 85mm deep, with glass lens. We offer these lamps finished with black body/chrome rim, all chrome or all nickel. Mounting bolt...
344.13828Large sidelamp equivalent to the Lucas VS45-6 type, 90mm diameter x 85mm deep, with glass lens. We offer these lamps finished with black body/chrome rim, all chrome or all nickel. Mounting bolt...
344.13828Large sidelamp equivalent to the Lucas VS45-6 type, 90mm diameter x 85mm deep, with glass lens. We offer these lamps finished with black body/chrome rim, all chrome or all nickel. Mounting bolt...
344.13828Replacement clear plastic sleeve lens for the number plate illumination window in 288 part number series (equivalent to Lucas L582 type) lamps.
343.79535Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L525 type. Fitted to Triumph TR2 and TR3 as well as many motorcycles. Chrome plated steel base with polycarbonate red and...
Replacement CONVEX mirror glass for Lucas type 160 (our 395 part number) mirrors, 152mm x 75mm.
343.17828A useful rear lamp and good reproduction of the Lucas MT110 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
A useful rear lamp and good reproduction of the Lucas MT211 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
Rear lamp equivalent to the Lucas 529 type. Stop, tail and number plate illumination. Fitted to many motorcycles. Steel base with rubber mounting pad, two piece high quality polycarbonate red...
Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L564 type. Fitted to many classic motorcycles from BSA, Triumph, Norton in the period c1955-70. Stainless steel base with...
High quality chrome number plate lamp equivalent to Lucas lamp type L860. Used on Aston Martin, MG, Triumph etc. Mounting hole centres 58mm. Supplied with rubber mounting pad and red and black...
Top rim stainless steel retaining screw for 297 (Lucas 1130 type) sidelamp lenses - use to retain lens part numbers 681 (glass with chrome surround) and 361C/361A (clear or amber moulded plastic).
342.8982Carbon brush with copper wire connection for Lucas type CWX wiper motors. 11mm x 5mm x 4.25mm
342.81537Freestanding fog lamp approx 184mm across x approx 115mm deep. Convex block pattern glass lens with central chrome knob as pattern and style of the original Lucas CLR700 lamp. Single bolt mounting...
342.49844Freestanding long-range beam driving/spot lamp approx 184mm across x approx 90mm deep. Convex plain glass lens with central chrome knob as pattern and style of original Lucas CLR700 lamp. Ford...
342.49844Quality reproduction of a reversing/number plate lamp of the Lucas L469 pattern. Chrome on brass construction with frosted main lens. 163mm x 40mm x 60mm deep. Two mounting bolts to rear 77mm...
Original pattern opaque glass lens with chrome rim surround for our 297 (Lucas 1130) type side lamps, overall outside diameter 47mm. Fixed in position with retaining screw part number 865 - please...
342.49844Recessed stop and tail lamp with rubber boot and body (approx 74mm diameter), chrome rim and red glass lens. 25mm depth from mount panel. As Lucas model L488 with flat lens. Alternative part...
Recessed lamp (approx 72mm diameter) with rubber boot and body, chrome rim and red glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Alternative part number 53564. Panel...
Angle mounted stop and tail rear lamp equivalent to Lucas L471 type (alternative part number 53200). Glass lens approx 57mm deep, chrome bezel. Base approx 127mm x 62mm. Uses a BAY15D bulb. For...
Rear stop and tail lamp equivalent to the L549 type for mounting on to sloping rear wing panel. Red plastic lens. Chrome base plate with flat back rubber mounting pad. Base 85mm x 142mm. Uses a...
Return spring for dipping reflectors used on Lucas lamps including the L150. Extension spring. 48mm long, 6.25mm diameter with one closed loop end and one open loop end. Please check dimensions...
A useful rear lamp and good reproduction of the Lucas 477/1 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The large red lens...
Chrome on bronze rim catch for Lucas head lamps, long type, overall dimensions 45mm long x 26mm wide. Makes Lucas assembly part no. 532590 with compression spring - part number 864A - and a small...
342.35886Round, 4 terminal, black bakelite junction box with screw cover, 2" (51mm) diameter. Equivalent to Lucas Model No. 4J, part number 78264.
Torpedo style side lamp, reproduction of the Lucas 1130 type. Chromium plated body approx 100mm long x 46mm diameter, amber plastic moulded lens.
Double filament bulb holder, mounted by two bolts...
Starter-solenoid rubber button cover - for part CA1400, equivalent to Lucas part 760130. Dimensions 27mm diameter x 17mm tall with a 17mm opening.
Remanufactured C30L round 3 terminal, black bakelite junction box with push on cover, 42mm diameter body with 46mm diameter lid, overall height 30mm, two mounting holes in the base with 21mm centres,
Single fuse box, black bakelite cover, takes glass type fuses 54mm x 32mm, height 45mm excluding clip. As Lucas type fuse box SF5/2, 37260
Round 2 terminal, black bakelite junction box with screw cover. 1 1/2" (38mm) diameter. Equivalent to Lucas Model No. 2J, part number 78265. Re-manufactured part.
Round, 6 terminal, black bakelite junction box with screw cover, 2 3/8" (60mm) diameter x approximately 36mm high. Equivalent to Lucas Model No. 6J, part number 78266. Re-manufactured part.
Sturdy panel mounted battery master isolator switch, similar to Lucas ST360 (SSB106) model. Requires 19mm hole in panel. A well-made reproduction part.At 12 volts rated for 100 Amps continuous.Fit...
Combined key on/off and off/side/head lamp switch, equivalent to the original Lucas PLC5 type switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are...
PLC6 type combined key on/off and off/side/head lamp switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are displayed on a white background through...
Pull on / push off switch (equivalent to Lucas part number SPB104). Long shank (18mm long, 9mm diameter,) suitable for wooden dash. Black plastic knob on hexagonal stem. Knob removed by depressing...
340.78198Floor mounted traditional dip switch for foot use, equivalent to Lucas part number 31284 (model FS22-1). Base plate measures 75mm x 40mm with 60mm hole centre fixing screws, three terminals with...
Floor mount starter switch for connecting directly into starter/battery cables, four mounting holes, two 5/16" terminals studs with nuts, as Lucas model ST18, 76427. Flange overall diameter...
Lucas CWX type wiper motor spindle. Made from brass. 165mm long, 5mm diameter, 6mm long threaded section at one end, three cross holes 1.5mm diameter at 20mm, 34mm and 88mm from the threaded...
340.78198Crome finished die cast lever arm for rear of Lucas CWX type wiper motor case. 36mm long arm with locating pin in end. 27mm total depth, 5.25mm bore through spindle, with 6mm counter bore 9mm deep...
340.78198Large rimmed reflector, with chrome rim, approx 71mm diameter overall. Single centre M5 screw fitting. Equivalent to Lucas type RER14. Rubber backing has slight curve to follow radius of panel.
340.65982Large rimmed reflector, with nickel rim, approx 71mm diameter overall. Single centre screw fitting. Equivalent to Lucas type RER14. Rubber backing has slight curve to follow radius of panel
340.65982Lucas type SF6, 37132, 2 fuse box, terminals marked B, A2, A3 & A4, base 60mm x 52mm two screw fixing, black bakelite. Supplied without fuses - see part number GLASSFUSE.
Lucas 'Altette' horn with chrome rim. A high quality reproduction from Lucas Classic of the of the original Lucas HF1234B horn. 12 volt. Many applications include MG TA, TB & TC etc. For flat...
Hazard flasher warning switch kit (12v only). Switch with illuminated knob and flasher unit mounted onto a small bracket with cover for mounting underneath the dash or steering column, which wires...
Reproduction interior rear view mirror equivalent to the pre-War Lucas 309L type. CONVEX mirror glass. Mirror head 4” by 1 ¾” (100mm x 43mm). Two screw hole base mount as shown,...
Reproduction interior rear view mirror equivalent to the Lucas 308 type. Large CONVEX mirror glass - mirror head 140mm x 43mm. Elegant two screw hole base mount as shown with 40mm hole centres....
340.25787As Lucas pattern 51C 'pull on' brake switch, metal body 63mm wide x 35mm deep x 40mm tall with 51mm fixing hole centres, Flange mounted, brass screw terminals on top. Ford part reference Y-13480.
Switch as Lucas PPG1 style light switch with pull/twist/pull action. Fits through 10mm hole max panel thickness 3mm with chrome retaining nut, hexagon shaft with spring loaded locating pin, three...
Push button with flange for mounting on to dash, button head approximately 38mm diameter. Mounting flange 53mm x 35mm with two screw hole (hole centres 42mm). Equivalent to Lucas part numbers...
Rotary on-off turn switch with black knob with two flattened grips. Short shank for metal dash. Requires 19mm panel hole, bezel 22mm diameter. Black knob with chrome bezel. Equivalent to Lucas...
12 volt remote starter button. Mount under the bonnet for ease of starting the engine whilst you're working on the car. Equivalent to Lucas part numbers SRB316, 2ST. For spare rubber button cover...
Replacement glass lamp unit for Lucas CFT700S type lamps. Block pattern domed lens with central chrome knob. Suitable alternative to Lucas part no 554813. Supplied with bulb holder but without...
340.25787Replacement glass lamp unit for Lucas 576 type fog lamps. Supplied with bulbholder but without bulb. Patterned dome lens with chrome centre dot. Please order bulb separately - British Pre-focus...
340.25787Replacement glass lamp unit for Lucas CLR700 type lamps. Plain domed lens with chrome centre dot. Ford part reference E26-NB-2. Supplied with bulb holder but without bulb. Please order bulb...
Plastic spacer for Lucas CWX type motors. 48mm long x 19mm wide with radiused corners, 6.5mm thick. Two mounting holes 4.75mm diameter, 39mm between centres. Central hole 10.5mm diameter. All 3...
340.25787Cork spacer/gasket for Lucas CWX type motors. 48mm long x 19mm wide with radiused corners, 3mm thick. Two mounting holes 4mm diameter, 39mm between centres. Central hole 6.5mm diameter. All 3 hole...
340.25787Battery master isolator switch for dashboard mounting etc equivalent to Lucas ST330, 76605. Mounting flange (53mm hole centres). The body is 43mm in diameter. The knob is marked with 'OFF' and...
Compact two position switch suitable for dash mounting. A quality reproduction switch equivalent to Lucas part number 9RW (380417) originally offered with a plain black cover (or with a cover...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
High quality fibre board and copper contact British Pre-focus bulb holder/contact plate for Lucas 576 type spot and fog lamps (e.g. SLR and SFT576). Single contact, with wire tails and bullet...
distributor contact point set - as Lucas 407050, which has very wide application.
one piece each 12162, 12153 & 12160 shown on diagrams.
Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim. Clear glass lens with AMBER bulb. 25mm depth from mounting panel. Lucas model L488 with flat lens. Mounts through...
339.70294Traditional style enamelled tin mug. Perfect for a cup of tea when working on your car, or to hold those important fixings that you don't want to lose.
281.69626Service sticker to remind you which oil to top up with and when
281.696263" diameter service sticker to remind you which oil to top up with and when
281.69626Replacement acrylic red lens (equivalent to Lucas part number 523307) for the Lucas 288-3 rear number plate lamp/light box assembly. Dimensions 95mm wide x 67mm tall.
275.0588Replacement acrylic red and white lens (equivalent to Lucas part number 523308) for the Lucas 288-3 rear number plate lamp/light box assembly. Dimensions 95mm wide x 67mm tall.
273.82965Chrome on brass fixing nut for original Lucas ST38 'Pork Pie' type lamps with 4BA thread.
Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Ignition warning lamp equivalent to the Lucas WL3 type, powder coated black on brass (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have...
273.23242Body to base gasket for Lucas type ST51 'D' Lamps - our part number series, 428, 249 and CA1149
273.09827Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
272.572Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
272.572Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
272.572Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
272.572Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...
272.572Lens retaining wire for 249/428 part number series (equivalent to Lucas type ST51 type) 'D' lamps
271.64572Clear side lens for number plate window for Lucas type ST51 type 'D' Lamps - our part numbers 249, 249A, 428, 428A, CA1149B and CA1149C
271.58478Chrome on brass fixing nut for reproduction 776/CA1249 part number series lamps (reproduction Lucas ST38/'Pork Pie' type lamps) with M4 fixing stud thread.
Rubber lens 'O' ring seal for Lucas 1130 type sidelamps (297 series lamps) fitted with the plastic lens (part number 361).
271.0851Spare clear side lens for part number series 776 and CA1249 (equivalent to Lucas ST38) 'Pork Pie' type rear lamps.
271.0851Rubber lens 'O' ring seal for Lucas type 1130 (297 series) sidelamps, with the glass lens with chrome surround and rim (part number 681).
270.385163 x 1/4" diameter stud wiper motor fixing for Lucas CR and CRT wiper motors. Equivalent to Lucas part number 741583, overall dimensions 53mm at widest x 75mm long.
Spring (spectacle shape) for rims that use short rim catch clip (our 863B), equivaent to Lucas part number 509191
Small spring used in Lucas CWX type wiper motors - 3.6mm OD, 12mm free length, 0.3mm wire diameter.
269.21783Large spring used in Lucas CWX type wiper motors - 6.4mm OD, 34mm free length, 0.6mm wire diameter.
269.21783Internally modified torpedo style side/wing lamp. Reproduction of the streamline Lucas 1130 type. Chromium plated brass body approx 100mm long x 46mm diameter. Frosted glass lens with chrome rim...
269.11533Amber glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lens. 40mm diameter lens with a concave back to allow fitment of a standard 25mm...
269.05106Replacement red split glass lens for ST51 type 'D' lamps, our part numbers 249A and 428A
268.9202Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
268.5444Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
268.5444Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
268.5444Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
268.5444Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
268.5444Red glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lenses. 40mm diameter lens with a concave back to allow fitment of a standard BA15D...
268.5444Replacement spare black cover with top screw for Lucas SF4 type fuse boxes. Marked with 'MODEL SF4 TYPE' in raised lettering as original
268.1446Flat rubber surround for vertical surfaces equivalent to Lucas type RER6. Self tapping screw for mounting supplied, approx 48mm base diameter.
268.1446Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
268.0938Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
268.0938Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
268.0938Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
268.0938Remanufactured switch equivalent to the Lucas 56SA type. Pull on switch with red illuminated knob, fitted with 12 volt bulb. Fits through 3/8" (10mm) panel hole on metal dash. Two push in...
Headlamp mounting bolt - hollow, with loose collar. Thread 5/8" x 26 tpi (fine thread) as original item. Measures approx 50mm long x 16mm thread diameter.
267.8696Headlamp mounting bolt - hollow. Thread 5/8" x 26 tpi (fine thread) as the original item. measures approx 56mm long x 16mm thread diameter.
Will work with our product 632 nut
Internally modified torpedo style sidelamp, reproduction of the Lucas 1130 type. Chromium plated on brass body approx 100mm long x 46mm diameter. Clear plastic lens held with screw in top, the...
267.86115High quality reproduction fog lamp equivalent to the Lucas WFT576 type. Rear mounted. Plain, chrome plated bronze top finial. Approx 146mm diameter. Block type glass lens with chrome centre knob....
267.86115High quality reproduction fog lamp equivalent to the Lucas SFT576 type. Free standing base mount. Plain, chrome plated bronze finial. Approximately 146mm diameter. Block type glass lens with...
267.86115High quality reproduction of the Lucas SLR576 type spot/driving lamp. Free standing base mount. Plain, chrome plated bronze top finial. Approximately 146mm diameter. Plain, domed glass lens with...
267.86115High quality reproduction spot/driving lamp equivalent to the Lucas WLR576 type. Rear mounted. Plain, chrome plated bronze top finial. Approximately 146mm diameter. Plain glass lens with chrome...
267.86115Internally modified torpedo-style side/wing lamp. Reproduction of the streamlined Lucas 1130-type. Chromium-plated brass body approx 100mm long x 46mm diameter. Frosted glass lens with chrome rim...
267.86115Original black Lucas screw on bakelite knob, plain top. No 8 NC female thread (32 tpi, 0.164" major OD). Approx. 19mm diameter x 25mm long.
267.70435Metal headlamp bowl for standard 7" Lucas 700 series type light units. Three adjuster version. Supplied with metal back shell, chrome retaining rim holder and adjusters.
267.70435Headlamp EPDM rim seal for many Lucas lamps including the L140, L148, L150 and L165 and L166. The flap locates in the 3mm wide groove in the bowl rim, behind where the reflector (bead type, rather...
267.39908'D' Lamp with full red glass lens, equivalent to the Lucas ST51 type lamp. Fitted with double contact bulbholder (for stop and tail lamps). Body 87mm wide x 75mm tall x 54mm deep, backing base...
267.31467Reproduction 'D' Lamp with full red glass lens, equivalent to the Lucas ST51 type. Fitted with double contact bulb holder (for stop and tail lamps). Body 87mm wide x 75mm tall x 54mm deep, backing...
267.31467Replacement red glass lens for plain ST51 type 'D' lamps, overall dimensions 67 tall x 78mm wide.
267.28036Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres,...
267.28036Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres,...
267.28036Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres,...
267.28036Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
267.28036Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
267.28036Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
267.28036Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
267.28036Early pattern reproduction 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide...
Early pattern 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall....
Dipping reflector pivot used on Lucas two piece dipping reflectors. Spring steel 'P' clip and ball bearing holds inner refector bowl and outer reflector rim togther, allowing the inner reflector...
267.28036Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
267.28036Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
267.28036Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
267.28036Toby 'diver's helmet' rear lamp. With three 52mm diameter glass, bulls eye lenses. Overall lamp diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs.
Fitted with...
Toby 'diver's helmet' small tail lamp. 48mm diameter mains glass bulls eye lens, 42mm diameter glass bulls eye side lenses. Overall lamp diameter about 80mm. Similar to the old CAV, Rotax and...
267.28036A super reproduction of the "Owl Eye" rear lamp from Toby - originally for 'stop', tail and reversing function. A quality recreation of the original Lucas type 312B lamp. All brass pressings,...
267.28036A super reproduction of the "Owl Eye" rear lamp from Toby - originally for 'stop', tail and reversing function. A quality recreation of the original Lucas type 312B lamp. All brass pressings,...
267.28036A super reproduction of the "Owl Eye" rear lamp from Toby - originally for 'stop', tail and reversing function. A quality recreation of the original Lucas type 312B lamp. All brass pressings,...
267.28036Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
266.8963Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
266.8963Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
266.89631.5mm thick nitrile 70 shore rubber LENS gasket for Lucas ST51 'D' type rear lamps (our part number series, 428, 249 and CA1149). Suitable for solid or split lens type lamps.
266.81268Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
266.81046Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
Red...
Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
Red...
Red reflector with a shallow surround equivalent to Lucas type RER5, flat faced rubber back with screw. Choice of chromium, nickel or polished brass rim. Overall diameter of base approx 53mm.
Red...
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Compression spring for use with long rim catch part no. 863A. The spring is held in place by a small roll pin inserted through the end of the catch). Makes Lucas part no assembly 532590
Flat mounting bracket for use with part number ALT-12. Equivalent to Lucas part number 700168. 125mm total bracket length with 11.25mm diameter fixing hole. Black powder coated steel.
Wing mirror (our part number 651 - equivalent to Lucas type 406) base gasket. Tear drop shape, 42mm long x 32mm wide with a 10mm hole, will accept a mirror with a 36mm x 26mm footprint.
266.81046Internally modified torpedo style side lamp, reproduction of the Lucas 1130 type light. Chromium plated body approx 100mm long x 46mm diameter. Frosted glass lens with chrome rim held with screw...
266.40866Push button (spring loaded) black knob, 22mm diameter chromium bezel, long type for wooden dash, maximum dash thickness 20mm. Requires 19mm hole. Makes contact when pushed. Screw terminal...
Floor mounted starter switch as Lucas ST18 (076411, also SRB312). Heavy pattern for connecting into starter/battery cables. Alternate part number reference 54033241. Supplied with machined...
Flat mounting bracket for use with part number ALT-12. Equivalent to Lucas part number 701639. 90mm total bracket length with two 7.5mm diameter fixing holes, 25mm between centres. Black powder...
'Red dot' tell tale medallion for original and reproduction Lucas type 1130, 1142, LD109 etc. side lamps. Dimension at top 13.5mm diameter, 6.25mm deep, 12.5mm diameter at base to push fit into a...
Fuse box equivalent to the Lucas type SF4, four glass fuse type box. Base 73mm x 72mm x approx 60mm overall height. Centre screw to lid top, black bakelite. Supplied without fuses - see part...
266.28278An authentic reproduction of the Lucas L150 type headlamp used on a number of British cars in the 1930's and 40's, including those manufactured by Armstrong Siddeley, Austin, Commer, Daimler,...
266.2098Hiqh quality clamp for tightening the bulb holder socket in the back of Lucas lamp refectors onto BA15 bulb holders (e.g. our part numbers 853 or 153). The clip strap is formed from steel and...
265.91223Surface mounted switch equivalent to Lucas type SPB140 (model HD77). Base 50mm diameter, two bolt mounting through back (35mm hole centres). Side dip switch (lever 18mm long), front horn push...
Pull on / push off switch, long threaded shank (16mm long, 9mm diameter) suitable for mounting through wooden dash. Overall length 73mm, maximum diameter 18mm, requires 9.5mm panel hole. Grub...
Remanufactured part equivalent to Lucas 31311, SPB120 panel mount indicator switch. Domed raised switch body assembly with moulded lever in black bakelite. Black, flat oval base mount (40mm high x...
Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
265.62057Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
265.62057Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
265.62057Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
265.62057Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
265.62057Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
265.62057Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
265.62057Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
265.62057Replacement glass lamp unit for Lucas 576 type spot lamps. Supplied with bulb holder but without bulb. Plain domed lens with chrome centre dot. Please order bulb separately - with the British...
265.62057A PAIR of LED light boards for conversion of Lucas ST38 'Pork Pie' type lamps fitted with all RED lenses to bright LED operation. On board electronics make this product suitable for 6V & 12V...
265.62057Remanufactured part equivalent to Lucas 31190D, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in brown bakelite. Black, flat oval base mount (40mm...
Reproduction dash lamp, equivalent to the Lucas DF41 type lamp, chromium cowl with 'Toby' medallion on top, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, centre hole...
265.62057High quality bakelite bulb holder for FT700 and CLR700 light units. Double contact, but one contact can be bent away to make single contact. 71.5mm OD, screw on, min ID 38.5 max ID 45mm
Remanufactured part equivalent to Lucas 31476, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in ivory bakelite. Black, flat oval base mount (40mm high...
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
265.33145Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
265.33145Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
265.33145Replacement bulb holder divider plate for 776/ST38/'Pork Pie' type rear lamps. Accepts 3 x BA15S bulbs. Made to the original specification.
A PAIR of all in one LED light boards and split Red/Amber lenses for conversion of Lucas ST38 'Pork Pie' type Stop & Tail lamps (with or without number plate illumination) with all RED lenses...
265.28363Stainless steel lamp housing retaining screw - 4BA thread x 16mm long. Slotted and knurled head, 8mm diameter. Used on D lamps to secure the lamp housing to the back plate.
265.0398Recessed lamp approximately 72mm diameter with rubber boot and body. Chrome rim with clear glass lens 45mm deep. Supplied with AMBER bulb. Equivalent to Lucas lamp model L594 with raised lens. SCC...
264.42572