Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Solderless battery terminal, round post, state whether positive or negative required.
938.1417Solderless battery terminal, round post, state whether positive or negative required.
Positive
Solderless battery terminal, round post, state whether positive or negative required.
negative
Single (joins 2 wires) snap connector. Supplied with solder type nipples. Per packet 10 pieces complete.
836.45325Double (joins 4 wires) snap connector supplied with solder type nipples. Per packet of 10 pieces complete.
836.45325solder type end fixing terminal for usual 160amp battery lead/cable, fixing hole 8mm, cable inlet 8mm.
830.5562Plain junction box top for our part number 375 - 6 terminal round junction box
761.96216Wire clip for holding old style brass spade HT terminal on to spark plug.
761.9058Solder type bullet terminal. Pack of 100 pieces.
573.1811Insulator cover for distributor cap terminal part number 006-13
572.66425Solder type nipples for snap connector, (note already supplied with parts 558 and 559 part numbers in 'Terminal and Connector Blocks'). 4.75mm diameter. Per packet of 10 pieces.
570.2032Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...
570.0977Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...
570.0977Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...
570.0977Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...
570.0977Round, 4 terminal, black bakelite junction box with screw cover, 2" (51mm) diameter. Equivalent to Lucas Model No. 4J, part number 78264.
Insulator cover for distributor cap or coil terminal - use with part numbers 006-03 or 921 depending on whether push in or acorn connection
568.50977Round 2 terminal, black bakelite junction box with screw cover. 1 1/2" (38mm) diameter. Equivalent to Lucas Model No. 2J, part number 78265. Re-manufactured part.
Remanufactured C30L round 3 terminal, black bakelite junction box with push on cover, 42mm diameter body with 46mm diameter lid, overall height 30mm, two mounting holes in the base with 21mm centres,
Round, 6 terminal, black bakelite junction box with screw cover, 2 3/8" (60mm) diameter x approximately 36mm high. Equivalent to Lucas Model No. 6J, part number 78266. Re-manufactured part.
Bulkhead fitting pull type starter switch (945), as Lucas model type ST19/2, applicable for 6 or 12 volt application, metal case with PVC terminal block. Terminals for heavy cables. A lower cost...
441.58893Crimp type nipples for snap connectors for 1mm^2 wire cross sectional area. Alternative to solder type (part number 560). 4.75mm bullet head diameter. Fits 558 and 559 part number snap connector...
440.41144Crimp type nipples for snap connectors for 2mm^2 wire cross sectional area. Alternative to solder type (part number 560). 4.75mm bullet head diameter. Fits 558 and 559 part number snap connector...
440.41144Brass solder type HT plug end terminal, wire passes through centre and is held in place with a spot of solder. For standard 7mm HT lead with copper wire centre.
304.8756Rubber mounted flanged MCC/BA9S pilot light bulb holder. Equivalent to Lucas part number 554710. 15cm long wire tails finished in bullet connectors. shrink wrap sheath. Rubber feed through grommet...
Flasher unit - three Lucar terminals marked L, P & X. L goes to live, P goes to warning light, X goes to indicators.
249.99661Flasher unit - three Lucar terminals marked L, P & X. L goes to live, P goes to warning light, X goes to indicators.
Flasher unit with three Lucar spade terminals.
Flasher unit - three Lucar terminals marked L, P & X. L goes to live, P goes to warning light, X goes to indicators.
Flasher unit with three Lucar spade terminals and end mount tag. 21 Watt x...
Acorn screw in terminal connection to top
12 volt ignition coil with push in top terminal
6 volt ignition coil, push in terminal connection top
Starter-solenoid terminal insulator rubber, equivalent to Lucas part 764272
133.2026Knurled brass spark plug terminal nut - for most modern plugs. 4BA thread
122.334885Push in cable electrical terminal as used by Lucas in rolled end terminals on lamps and switches etc. Bared cable is pushed through the hollow middle and then pulled back over the outside before...
116.01659HTC straight spark plug terminal, as original early Champion version. These are a non-suppressed terminal with fixed screw tip that screws into the centre core of the HT wire ends. Applications...
7" sealed beam headlamp unit 12v 65/55watt, RHD, with side light window, three spade terminal connection. LHD unit also available.
7" sealed beam headlamp unit 12v 65/55watt, LHD, with side light window, three spade terminal connection. RHD unit also available.
New old stock genuine Lucas RF96 regulator lid, marked LUCAS ENGLAND, VOLTAGE REGULATOR, with terminal lettering A1, A, F, D, E. dimensions:- 83mm x 58mm and 72mm tall.
91.89556Single ended, double contact bulb holder. Dimensions thread diameter 19mm, overall length 38mm, flange 28.5mm. Accepts SBC BA15D bulb, rear nut removes to expose terminal contacts.
91.89556Push button (spring loaded) black knob, 22mm diameter chromium bezel, long type for wooden dash, maximum dash thickness 20mm. Requires 19mm hole. Makes contact when pushed. Screw terminal...
Repair kit for black SPB 120 switches - black Bakelite switch base with brass terminal connections, three piece brass sprung roller contact assembly, black Bakelite screw down bezel with red lens...
58.359673WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.
53.493225WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.
12 volt 22A Voltage regulator/control box with screw terminals. Size approximately 85mm x 80mm x 95mm tall. Black. 2 bobbin type. Equivalent to Lucas Part Numbers RB106 and NCB100. Mechanical unit...
Floor mount starter switch for connecting directly into starter/battery cables, four mounting holes, two 5/16" terminals studs with nuts, as Lucas model ST18, 76427. Flange overall diameter...
6 volt reproduction of the RF95, base 115mm x 87mm x approx 95mm overall height. 9 screw terminals.
49.8715212 volt reproduction of the Lucas RF95, base 115mm x 87mm x approx 95mm overall height. 9 screw terminals.
49.387695Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
48.28086Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
48.28086Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
48.28086Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
48.28086Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
48.280866 volt ignition coil with acorn nut connection for the high tension lead, twin lucar terminals, supplied with mounting bracket.
Switch as Lucas PPG1 style light switch with pull/twist/pull action. Fits through 10mm hole max panel thickness 3mm with chrome retaining nut, hexagon shaft with spring loaded locating pin, three...
Toggle switch, on/off only, requires hole through metal panel 13mm. Nickel plated toggle lever, Lucar type 6.3mm spade terminals.
12 volt 22A voltage regulator/control box with Lucar push-on terminals. Size approximately 85mm x 80mm x 95mm tall. black. 2 bobbin type. Equivalent to Lucas Part Numbers NCB101 and RB106....
Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection...
47.596043Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection...
47.596043Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection...
47.596043Double contact bulb holder insert, fits into many BA15 bulb holder bodies, including a number of vintage dash lamps, two spring loaded brass bulb contacts at one end with two spring type wire clip...
47.596043New made 6 volt cut out regulator unit as Lucas RB106 type, 5 screw terminals, 2 bobbin, size approx 85mm x 80mm x 95mm tall.
47.115334Useful rotary 4 position (off, side, dip, main) switch with black lever to fit a metal dash (26mm hole) with fixing nut to retain. 6 screw terminals to rear.
44.72947Useful rotary 4 position (off, side, dip, main) switch with an ivory lever to fit a metal dash (26mm hole) with fixing nut to retain. 6 screw terminals to rear.
44.72947MCC/BA9s bulb holder. 12.3mm diameter, overall length 18.5mm, useful general application spare for bayonet base 9mm cap equal pin bulbs. single contact, supplied with connectors and terminals.
44.72947Lucas type SF6, 37132, 2 fuse box, terminals marked B, A2, A3 & A4, base 60mm x 52mm two screw fixing, black bakelite. Supplied without fuses - see part number GLASSFUSE.
6 Volt Horn - black with chrome ring, attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm mounting hole
44.072845Heavy black metal cover held with a screw knob, bakelite base fuse box. Two terminals to wind round the fuse wire selected. Base 72mm x 72mm, x depth 50mm (does not include the screw knob height)....
40.642876Lucas RB340 type. Three bobbin.12V 22A Dynamo Voltage Regulator with Lucar terminals. Equivalent to Lucas part number NCB130, NCB132 (the uprated version of 11A NCB134/NCB136). E - earth, D -...
Brake light switch, terminals protected by a rubber cover, connects to linkage with a spring, switch 30mm long x 33mm wide x 30mm tall with fixing hole centres 24mm, spring length including hook...
40.642876As Lucas pattern 51C 'pull on' brake switch, metal body 63mm wide x 35mm deep x 40mm tall with 51mm fixing hole centres, Flange mounted, brass screw terminals on top. Ford part reference Y-13480.
Pull/push switch, long shank suitable for wooden dash, maximum dash thickness 10mm. Fits through 8mm hole. Overall dimensions 58mm long x 30mm at widest point. Two brass terminals with screws....
40.642876Small round surface mount toggle on/off switch, 28mm diameter x approx 13mm tall cover. Chrome plated cover (unscrews to get to terminals). Only suitable for 6 volt or 12 volt, maximum rating 3 amp.
40.64287612 Volt Horn - black with chrome ring attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade/Lucar terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm...
40.642876Double contact bulb holder insert, fits our 422 bulb holder, two spring loaded brass bulb contacts at one end with two wire terminals at the other, insulator body dimensions 16mm long x 16.7mm...
40.642876Battery master isolator switch for dashboard mounting etc equivalent to Lucas ST330, 76605. Mounting flange (53mm hole centres). The body is 43mm in diameter. The knob is marked with 'OFF' and...
Combined key on/off and off/side/head lamp switch, equivalent to the original Lucas PLC5 type switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are...
White surface mounting trafficator indicator switch with integral flasher unit. New old stock by Starlite, with three terminals marked IG, R and L. Requires separate warning light, supplied with...
35.62108Painted cowl type number plate lamp with glass lens, two bolt mounting with 45mm hole centres, supplied with two cables fitted with terminals ( one bullet, one eyelet. ) and waterproof cable...
35.62108Double contact headlamp converter for most many headlamps which are mounted through the rear of reflector bowl - usually held in place in the bulb holder socket on Lucas reflectors with clamp clip...
35.62108High quality 12 volt all black disc horn. 75mm diameter with mounting bracket and 8mm clearance hole.This horn has two terminals so the body of the horn is insulated, making it suitable for 12...
35.62108A neat rubber side bolt mounted indicator lamp, moulded to match the original Rubbolite 25 lamp, without any side lens (for number plate illumination). Supplied with a domed amber lens as standard...
35.385223A neat rear lamp equivalent to the Rubbolite No. 25 lamp, with a single mounting point. Can also be supplied with a flat red lens (instead of the domed red lens fitted as standard) to give a lamp...
35.385223Black split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. fitted with...
35.051903Chrome split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function, fitted...
35.051903Remanufactured switch equivalent to the Lucas 56SA type. Pull on switch with red illuminated knob, fitted with 12 volt bulb. Fits through 3/8" (10mm) panel hole on metal dash. Two push in...
PLC6 type combined key on/off and off/side/head lamp switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are displayed on a white background through...
Pull on / push off switch (equivalent to Lucas part number SPB104). Long shank (18mm long, 9mm diameter,) suitable for wooden dash. Black plastic knob on hexagonal stem. Knob removed by depressing...
34.89743Bulkhead fitting pull type starter switch (945), Lucas model type ST19/2, 76423 applicable for 6 or 12 volt application, all metal body with rubber shielded terminals for heavy cables. Ford part...
RED dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
34.89743GREEN dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
34.89743AMBER dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
34.89743BLUE dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
34.89743Large 12-volt electric horn with chrome cover fitted with chrome on brass 'Toby' medallion in the centre and stainless steel domed nuts around the edge of the cover, in the style of the 'Altette'...
34.89743Two, three and four brush dynamo and starter brush sets.
34.827633Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
8/10hp 1937 onwards
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
8/10hp 1932-34
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
fits D33 - C575 dynamo
Two, three and four brush dynamo and starter brush sets.
100E & 105E
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
8/10hp 1932-37
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
as Lucas 54212257
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
8/10hp 1935-40
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Applications include Morris Eight Series E, M10/4 Series 3 and Series M
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Lucas ref 238061 . fits C45 C40 dynamo
Two, three and four brush dynamo and starter brush sets.
Equivalent to the Lucas 255659 set - applications include Morris Eight Series E and M10/4 Series 3
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
Two, three and four brush dynamo and starter brush sets.
8/10hp 1940 onwards
Two, three and four brush dynamo and starter brush sets.
100E
Two pin plug with different diameter pins (pins 13mm centres, plug pins 3.18mm diameter for black socket, 3.81mm diameter red socket). Often used for inspection lamps etc. Equivalent to Lucas plug...
Two sockets with different diameter pins, often used for inspection lamps etc. Equivalent to Lucas sockets 38605A, as supplied by Lucas for fitting Lucas plug 304919. Will fit our part 960P.
Floor mounted traditional dip switch for foot use, equivalent to Lucas part number 31284 (model FS22-1). Base plate measures 75mm x 40mm with 60mm hole centre fixing screws, three terminals with...
Clockwork panel mounted flasher unit/indicator switch (suitable for 6, 12 or 24 volt systems), makes and breaks contacts for approximately 20-25 seconds then self cancels. Body size approximately...
31.569012Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L525 type. Fitted to Triumph TR2 and TR3 as well as many motorcycles. Chrome plated steel base with polycarbonate red and...
Remanufactured part equivalent to Lucas 31311, SPB120 panel mount indicator switch. Domed raised switch body assembly with moulded lever in black bakelite. Black, flat oval base mount (40mm high x...
Remanufactured part equivalent to Lucas 31476, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in ivory bakelite. Black, flat oval base mount (40mm high...
Remanufactured part equivalent to Lucas 31190D, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in brown bakelite. Black, flat oval base mount (40mm...
Lucas 'Altette' horn with chrome rim. A high quality reproduction from Lucas Classic of the of the original Lucas HF1234B horn. 12 volt. Many applications include MG TA, TB & TC etc. For flat...
PAIR of all in one LED light boards and split Red/Amber lenses for conversion of Lucas ST51 SPLIT lens 'D Lamp' type Stop & Tail lamps (with or without number plate illumination) fitted with...
27.968332Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
27.210173Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
27.210173Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
27.210173Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...
27.210173Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L564 type. Fitted to many classic motorcycles from BSA, Triumph, Norton in the period c1955-70. Stainless steel base with...
Rear lamp equivalent to the Lucas 529 type. Stop, tail and number plate illumination. Fitted to many motorcycles. Steel base with rubber mounting pad, two piece high quality polycarbonate red...
Split brass washer for distributor HT lead (each). 9.5mm diameter with 2mm hole.
24.383186Straight spark plug HT cap, black phenolic moulding with 5K OHM carbon suppressor, overall length 70mm. Will suit older vehicles. Threaded spur screws into the core of the HT/ignition cable....
24.383186Angled (120 degree) spark plug HT cap, black phenolic moulding with carbon 5k ohm suppressor. Supplied with grommets making it waterproof, or can be used without grommets to better suit older...
24.383186A useful rear lamp and good reproduction of the Lucas MT110 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
A useful rear lamp and good reproduction of the Lucas MT211 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
A useful rear lamp and good reproduction of the Lucas 477/1 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The large red lens...
Reproduction part equivalent to Lucas TS82 panel and column mounted rotary 3-way indicator/Trafficator switch. Alternative Lucas number 31611 (also 31379 is the same switch body just with a longer...
This inline suppressor features a 7.6mm diameter socket at either end with a brass screw thread in the centre that screws into the core of standard 7mm diameter HT leads. The carbon suppressor...
18.733194High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
16.565784High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
16.565784High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
16.565784High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
16.565784High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
16.565784PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles...
11.699213PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles...
11.699213PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles...
11.699213