Premium felt lined 1 1/2" wide leather Bonnet Strap - Three part, fully made to size with staples
Premium leather bonnet strap, with made-to-measure top and side straps. Available in high-quality brown or black leather. 1 1/2" wide (38mm). This pattern is made as a three-part strap - with two buckles on the 'bow tie' top strap, pointed end plain straps for both sides finished with staples. Felt lined with buckle protector pads as standard. Both pointed-end straps are finished with a chrome on brass staple. To order this strap you need to specify two measurements.
Standard features of this premium made-to-measure leather bonnet strap:
- Felt non-scratch lining - stitched
- One fixed leather keep behind each buckle
- Buckle protector pads 6cm square featuring 30mm diameter 'Toby' stamp
- Polished stainless-steel belt buckles
- 5 pre-punched holes in the plain ends/side straps
- Two fitted chrome on brass staples
Instructions:
- For the top strap with buckles. Determine where the top buckles should rest on your bonnet, with consideration to where the staple loops are to be mounted. Decide the measurement from one buckle-roller end to the other buckle-roller end. This is Measurement A on the Fitting Instructions diagram below.
- For the total assembly - the total length over the bonnet from the base location of the footman staple on one side to the base location of footman staple on the other side. We will use this dimension and the one above to create a strap assembly with this total length when all three parts are assembled with the middle hole on each side strap used in each buckle. Use a piece of nylon webbing or similar flexible material to find this distance. This is Measurement B on the Fitting Instructions diagram below.
- Order your Toby Double Buckle bonnet strap using these two measurements.
- To provide further confirmation of sizes, please email a sketch drawing complete with dimensions to info@vintagesupplies.com
- When fitting, assemble the strap on the bonnet (using the middle of the 5 holes punched into the plain ends) and position the staples for marking and drilling
The buckle protectors of this super bonnet strip are embossed with the 'Toby' logo, 30mm in diameter. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to authentic reproductions of the finest period motoring accessories for over 30 years.
