Perelli webbing approximately 2" wide. Rubberised fabric strib used for seat bases. Beige colour with approximately 10% stretch. Can be stapled/tacked in place or secured with captive clips - see part number 525A. Ideal for replacement of work or damaged seat webbing.

Double height wood screw stud. Nickel plated finish. Offered in choice of two thread (into body) diameters - standard and with an oversize machine cut thread to accommodate existing worn holes in vehicle woodwork. The oversize option is very useful where the old wood thread is pulled or worn. Length of thread approx 14mm. Per packet of 10 pieces

A heavy herring bone pattern twill type upholstery cloth, which could be used as a build up cloth backing, or in its own right as a facing cloth on vertical faces of seats etc. Roll width is 1250mm. Offered by the metre off the roll.

We have a quantity of new unused plush cut wool moquette upholstery cloth of older manufacture which is used on panels and wheel arches and the back of seats on many marques such as Rover and Jaguar. All are 50" (1250mm) wide, and offered in metre lengths cut off the roll. The supply is limited and once gone will not be repeated. The rolls have all been stored in good conditions.

Rubberised hair mix sheet, approx 1850mm x 900m x 25mm thick. Good for seat filling applications, easy to work with.

Single height clinch type stud - fixed to material - with a single hollow rivet type post that passes through the material and then a plate which it is then flared over to secure. Nickel plated finish, per packet of 10.

Double height clinch type stud - fixed to material - with two prongs that pass through material and a plate, which they are then folded back over to secure. Nickel plated finish, per packet of 10.

Double height wood screw stud. Nickel plated finish. Offered in choice of two thread (into body) diameters - standard and with an oversize machine cut thread to accommodate existing worn holes in vehicle woodwork. The oversize option is very useful where the old wood thread is pulled or worn. Length of thread approx 14mm. Per packet of 10 pieces -- Thinner wood screw stud

Double height wood screw stud. Nickel plated finish. Offered in choice of two thread (into body) diameters - standard and with an oversize machine cut thread to accommodate existing worn holes in vehicle woodwork. The oversize option is very useful where the old wood thread is pulled or worn. Length of thread approx 14mm. Per packet of 10 pieces -- oversize diameter wood screw stud

Steel 2BA hex nuts for tenax, lift the dot etc studs, per packet of 10.

Double height 2BA machine thread stud. Nickel plated, per packet of 10. Purchase 713 part number nuts if required. sold in 10s.

Single height machine threaded (2BA) stud. Per packet of 10. Purchase 713 part number nuts if required.

Single height clinch type stud - fixed to material - with two prongs that pass through material and a plate, which they are then folded back over to secure. Nickel plated finish, per packet of 10.

Single height, self tapping metal screw stud. Nickel finish, per packet of 10.

Single height wood screw stud. Nickel plated finish. Per packet of 10.

Double height stud, two screw base plate. Mounting holes of base plate approx. 18mm apart. Nickel plate finish.

Single height stud, two screw base plate. Nickel plate finish, base plate mounting holes approx 15mm apart. Per packet of 10.

Socket with back plate - fixed to material. Nickel plate finish, packet of 10.

Stud (10mm) and eyelet for cloth mounting. Nickel plate finish, per packet of 10 pieces.

Stud (10mm) with screw for body fitting. Nickel plate finish, per packet of 10 pieces.

Button (15mm overall) and socket for cloth fitting, to fit over 10mm stud. Nickel plated finish, per packet of 10 pieces.

Screw top fastener and stud for mounting on to cloth. Nickel plated

Tenax fastener locking key, for tightening the back nut of Tenax sockets, nickel plated.

Nickel plated brass socket with nut. Fixes through material. Pull centre knob to release claw type catch. Per packet of 10.

Nickel plated brass stud with long 2BA machine thread without shoulder (as used on MG, Lotus, TR etc.) Thread 25mm long. Purchase 713 part number nuts if required.

Nickel plated brass stud with 2BA machine thread with shoulder. Thread 9mm long. Per packet of 10 pieces. Purchase 713 part number nuts if required.

Nickel plated brass stud with 2BA machine thread. Without shoulder. Per packet of 10 pieces. Thread approx. 9mm long. Purchase 713 part number nuts if required.

Nickel plated brass stud with wood screw thread with shoulder. Per packet of 10.

Nickel plated brass stud with wood screw thread, without shoulder. Thread 9.5mm long. Per packet of 10.

Nickel plated Veltex stud with self tapping screw, per packet of 10

Nickel plated Veltex socket complete with black metal ring which is pushed through the carpet into the plate and the points are folded over, thus the fitting is almost invisible when fitted, per packet of 10.

Turnbutton or turnbuckle fastener socket with backplate. For cloth, self colour brass.

Turnbutton or turnbuckle fastener. Single height. Clinch (fix to material) base stud for cloth mounting, self colour brass.

Turnbutton or turnbuckle fastener. Double height, two screw base stud, self colour brass. Base approx 32mm x 12mm. Overall height approx 20mm. Height under twist top to face of base approx 8mm. Mounting holes approx 22mm centres.

Turnbutton or turnbuckle fastener. Single height, two screw base stud, self colour brass. Base approx 32mm x 12mm. Overall height approx 18mm. Height under twist top to face of base approx 5mm. Mounting holes approx 22mm centres.

Turnbuckle or turnbutton fastener socket with back plate. For fabric, nickel plated. Per packet of 10

Turnbutton or turnbuckle fastener. Single height stud. Clinch type (fixed to material). Nickel plate, metal twist top.

Turnbutton or turnbuckle fastener. Double height stud with back plate screw fixing. Nickel plate, solid twist top, per packet of 10. Base approx 32mm x 12mm. Overall height approx 20mm. Height under twist top to face of base approx 8mm. Mounting holes approx 22mm centres.

Turnbutton or turnbuckle fastener. Single height stud with back plate screw fixing. Nickel plate, metal twist top, per packet of 10. Base approx 32mm x 12mm. Overall height approx 18mm. Height under twist top to face of base approx 5mm. Mounting holes approx 22mm centres.

Window channel retainer clip, ' U ' shaped clip which pushes into a 15.5mm (approx) channel, and accepts a 14mm window channel as our 488, has inner and outer gripping tangs which holds clip and channel in place. Dimensions 15.5 mm x 12.5mm x 10mm.

A heavy herring bone pattern twill type upholstery cloth, which could be used as a build up cloth backing, or in its own right as a facing cloth on vertical faces of seats etc. Roll width is 1250mm. Offered by the metre off the roll. --

A heavy herring bone pattern twill type upholstery cloth, which could be used as a build up cloth backing, or in its own right as a facing cloth on vertical faces of seats etc. Roll width is 1250mm. Offered by the metre off the roll. --

We have a quantity of new unused plush cut wool moquette upholstery cloth of older manufacture which is used on panels and wheel arches and the back of seats on many marques such as Rover and Jaguar. All are 50" (1250mm) wide, and offered in metre lengths cut off the roll. The supply is limited and once gone will not be repeated. The rolls have all been stored in good conditions. --

We have a quantity of new unused plush cut wool moquette upholstery cloth of older manufacture which is used on panels and wheel arches and the back of seats on many marques such as Rover and Jaguar. All are 50" (1250mm) wide, and offered in metre lengths cut off the roll. The supply is limited and once gone will not be repeated. The rolls have all been stored in good conditions. --

We have a quantity of new unused plush cut wool moquette upholstery cloth of older manufacture which is used on panels and wheel arches and the back of seats on many marques such as Rover and Jaguar. All are 50" (1250mm) wide, and offered in metre lengths cut off the roll. The supply is limited and once gone will not be repeated. The rolls have all been stored in good conditions. --

We have a quantity of new unused plush cut wool moquette upholstery cloth of older manufacture which is used on panels and wheel arches and the back of seats on many marques such as Rover and Jaguar. All are 50" (1250mm) wide, and offered in metre lengths cut off the roll. The supply is limited and once gone will not be repeated. The rolls have all been stored in good conditions. --

White wadding for general padding applications, 28oz padding in bundles approx. 20 metres long by 450mm wide. Please order half (enter 0.5 quantity below) or full rolls.

A mid range quality (10oz) hessian cloth, 1.85m wide.

Arrow head spring clip, approx 17mm across base, 11mm widest point on arrow, 17mm deep, per packet of 10 pieces. Used with part 883P.

Spring clip with 3mm gap U, for retaining headlining or weatherstrip, per packet of 10 pieces

Spring clip with 4mm gap U, for retaining headlining or weatherstrip, per packet 10 pieces

Double barbed spring clip for fitting under push on door trim. 10mm depth. To push over about 2mm panel. Per packet of 10 pieces

Push fit panel clip, domed head, matt black finish, all metal construction. Size measures: head 15mm diameter, length 20mm (under head) to suit 7mm hole. 

Trim panel fixing clip, rear push through clip holder only, 25mm long 12mm wide, prongs 7mm deep. Per packet of 10 pieces

'Plate fixing' clips - arrow head clips fits into front of plate which is held with spikes in rear of panel, per packet of 10 pieces, for measurements see 702 and 883P.

Spring clip - double sided S shape edge clip, 13mm long x 10mm tall x 5mm thick and will accept a 2mm panel thickness. per packet of 10 pieces.

Edge or hole fitting panel clip, fits into a 8mm hole with 12mm reach, bottom slot with accept 3mm thick board, overall dimensions 18mm tall x 16mm wide, per packet of 10 pieces

Nickel plated steel bifurcated rivet, 7.9mm head, stem 3.9mm x 8mm under head. For fixing upholstery etc. Per packet 10

51mm wide steel clips for securing 2" wide Perelli webbing (see part number 525) to a frame. Four teeth secure the webbing when the crip is pressed together. Sold as a pack of 10.