Pressed chrome on brass light pattern end cover plate, supplied with a drilled 3.6mm hole with flutes around the hole. A finishing end for aluminium/rubber tread strips. Offered for the three different size widths of aluminum - 16mm, 19mm and 22m. Please note that the measure is the outside width of the aluminium tread strip. The rubber needs to be trimmed so it buts up to the end cover when the cover is over the end of the aluminium strip. For a heavier weight cast end cover please see part number 970 -- fits over 22mm wide base strip

Pressed chrome on brass light pattern end cover plate, supplied with a drilled 3.6mm hole with flutes around the hole. A finishing end for aluminium/rubber tread strips. Offered for the three different size widths of aluminum - 16mm, 19mm and 22m. Please note that the measure is the outside width of the aluminium tread strip. The rubber needs to be trimmed so it buts up to the end cover when the cover is over the end of the aluminium strip. For a heavier weight cast end cover please see part number 970 -- Fits over 16mm wide base strip

Moulded extruded aluminium running board strip and black rubber filler strip (not fitted). Click on "bigger image" for more detail dimensions sold by the metre, i.e. only full meter quantity orders please regardless of cut lengths. Maximum length available 2 metre. If a 1.2mtr length is required, a 2mtr length will be charged and sent in a 1.2mtr length with a 0.80mtr off-cut. As an example if 10 x 1.2mtrs is required, please order 20mtrs. 10 x 2mtr. This product can be sent straight or, if over 0.9m can be coiled to reduce shipping fees. Please select options below to cut down the length and/or to coil. Postal service can be used for lengths up to 0.7m, standard courier service up to 0.9m, anything over this will incur the oversize fee. Export of this product to Italy is not possible due to customs radiometric controls. -- Aluminium supplied WITH rounded rubber filler strip. Export of this product to Italy is not possible due to customs radiometric controls.

Moulded extruded aluminium running board strip and black rubber filler strip (not fitted). Click on "bigger image" for more detail dimensions Stocked in 2 meter lengths, sold by the meter, i.e. only full meter quantity orders please regardless of cut lengths. If a 1.2mtr length is required, a 2mtr length will be charged and sent in a 1.2mtr length with a 0.80mtr off-cut. As an example if 10 x 1.2mtrs is required, please order 20mtrs. 10 x 2mtr. This product can be sent straight or, if over 0.9m can be coiled to reduce shipping fees. Please select options below to cut down the length and/or to coil. Postal service can be used for lengths up to 0.7m, standard courier service up to 0.9m, anything over this will incur the oversize fee. Export of this product to Italy is not possible due to customs radiometric controls. -- Aluminium supplied WITH rounded rubber filler strip Export of this product to Italy is not possible due to customs radiometric controls.

Moulded extruded aluminium running board strip supplied with or without rounded black rubber filler strip (not fitted). Click on "bigger image" for more detail dimensions Stocked in 2 meter lengths, sold by the meter, i.e. only full meter quantity orders please regardless of cut lengths. If a 1.2mtr length is required, a 2mtr length will be charged and sent in a 1.2mtr length with a 0.80mtr off-cut. As an example if 10 x 1.2mtrs is required, please order 20mtrs. 10 x 2mtr. This product can be sent straight or, if over 0.9m can be coiled to reduce shipping fees. Please select options below to cut down the length and/or to coil. Postal service can be used for lengths up to 0.7m, standard courier service up to 0.9m, anything over this will incur the oversize fee. -- Aluminium supplied WITH rounded rubber filler strip Export of this product to Italy is not possible due to customs radiometric controls.

Moulded extruded aluminium running board strip and ribbed black rubber filler strip (not fitted).  Stocked in 2 meter lengths, sold by the meter, i.e. only full meter quantity orders please regardless of cut lengths. If a 1.2mtr length is required, a 2mtr length will be charged and sent in a 1.2mtr length with a 0.80mtr off-cut. As an example if 10 x 1.2mtrs is required, please order 20mtrs. 10 x 2mtr. This product can be sent straight or, if over 0.9m can be coiled to reduce shipping fees. Please select options below to cut down the length and/or to coil. Postal service can be used for lengths up to 0.7m, standard courier service up to 0.9m, anything over this will incur the oversize fee. Export of this product to Italy is not possible due to customs radiometric controls. -- Aluminium supplied with ribbed rubber filler strip Export of this product to Italy is not possible due to customs radiometric controls.

Pressed chrome on brass light pattern end cover plate, supplied with a drilled 3.6mm hole with flutes around the hole. A finishing end for aluminium/rubber tread strips. Offered for the three different size widths of aluminum - 16mm, 19mm and 22m. Please note that the measure is the outside width of the aluminium tread strip. The rubber needs to be trimmed so it buts up to the end cover when the cover is over the end of the aluminium strip. For a heavier weight cast end cover please see part number 970 -- Fits over 19mm wide base strip

Moulded extruded aluminium running board strip and black rubber filler strip (not fitted). Click on "bigger image" for more detail dimensions sold by the metre, i.e. only full meter quantity orders please regardless of cut lengths. Maximum length available 2 metre. If a 1.2mtr length is required, a 2mtr length will be charged and sent in a 1.2mtr length with a 0.80mtr off-cut. As an example if 10 x 1.2mtrs is required, please order 20mtrs. 10 x 2mtr. This product can be sent straight or, if over 0.9m can be coiled to reduce shipping fees. Please select options below to cut down the length and/or to coil. Postal service can be used for lengths up to 0.7m, standard courier service up to 0.9m, anything over this will incur the oversize fee. Export of this product to Italy is not possible due to customs radiometric controls. --

Moulded extruded aluminium running board strip and black rubber filler strip (not fitted). Click on "bigger image" for more detail dimensions Stocked in 2 meter lengths, sold by the meter, i.e. only full meter quantity orders please regardless of cut lengths. If a 1.2mtr length is required, a 2mtr length will be charged and sent in a 1.2mtr length with a 0.80mtr off-cut. As an example if 10 x 1.2mtrs is required, please order 20mtrs. 10 x 2mtr. This product can be sent straight or, if over 0.9m can be coiled to reduce shipping fees. Please select options below to cut down the length and/or to coil. Postal service can be used for lengths up to 0.7m, standard courier service up to 0.9m, anything over this will incur the oversize fee. Export of this product to Italy is not possible due to customs radiometric controls. --

Moulded extruded aluminium running board strip supplied with or without rounded black rubber filler strip (not fitted). Click on "bigger image" for more detail dimensions Stocked in 2 meter lengths, sold by the meter, i.e. only full meter quantity orders please regardless of cut lengths. If a 1.2mtr length is required, a 2mtr length will be charged and sent in a 1.2mtr length with a 0.80mtr off-cut. As an example if 10 x 1.2mtrs is required, please order 20mtrs. 10 x 2mtr. This product can be sent straight or, if over 0.9m can be coiled to reduce shipping fees. Please select options below to cut down the length and/or to coil. Postal service can be used for lengths up to 0.7m, standard courier service up to 0.9m, anything over this will incur the oversize fee. --

Cast chrome on brass heavy pattern end cover plate, supplied with a drilled hole. A finishing end for aluminium/rubber tread strips. Offered for the three different size widths of aluminum - 16mm, 19mm and 22m. Please note that the measure is the outside width of the aluminium tread strip. For a lighter weight pressed and fluted end cover please see part number 970A -- fits over 22mm wide base strip

Cast chrome on brass heavy pattern end cover plate, supplied with a drilled hole. A finishing end for aluminium/rubber tread strips. Offered for the three different size widths of aluminum - 16mm, 19mm and 22m. Please note that the measure is the outside width of the aluminium tread strip. For a lighter weight pressed and fluted end cover please see part number 970A -- Fits over 19mm wide base strip. At their highest point, these are approximately 12mm high.

Cast chrome on brass heavy pattern end cover plate, supplied with a drilled hole. A finishing end for aluminium/rubber tread strips. Offered for the three different size widths of aluminum - 16mm, 19mm and 22m. Please note that the measure is the outside width of the aluminium tread strip. For a lighter weight pressed and fluted end cover please see part number 970A -- fits over 16mm wide base strip

Cast chrome on brass heavy pattern end cover plate, supplied with a drilled hole. A finishing end for aluminium/rubber tread strips. Offered for the three different size widths of aluminum - 16mm, 19mm and 22m. Please note that the measure is the outside width of the aluminium tread strip. For a lighter weight pressed and fluted end cover please see part number 970A

Black rounded rubber tread filler for 22mm wide aluminium strip. Approx 16mm wide across base, 14mm wide neck, 9.2mm tall approx.

Black, rounded rubber tread filler for 16mm wide aluminium strip. 11mm wide across base, 8.5mm wide neck, 8.9mm tall approximately.

Black, rounded rubber tread filler for 19mm wide aluminium strip. Approx 15mm wide across base, 12.5mm wide neck, 8.7mm tall approx.

Black, ribbed rubber tread filler for 16mm wide aluminium strip. 10.2mm wide across base, 8mm wide neck, 6.4mm tall approx.