Small round surface mount toggle on/off switch, 28mm diameter x approx 13mm tall cover. Chrome plated cover (unscrews to get to terminals). Only suitable for 6 volt or 12 volt, maximum rating 3 amp.

Lucas type 79SA wiper switch. Off / on / on 2 speed for early DR3 type motors. The park is in the switch .

Dolly double pole change over On/On heavy duty metal toggle switch or  On/Off  two position double pole switch, nickel plated brass lever and 6.3mm blade terminals. 13mm panel hole. 10 amps at 28 volts dc rating, Made in England.

Short round metal switch Off/On. Short aluminium lever with rounded end. Approx. 12.5mm panel hole required, length 44m, thread length 4mm, knob length 12mm.

Black toggle illuminated green LED switch with metal fascia and locking nuts and washers on 13mm long threaded feed through that requires a 12mm clearance hole. High quality switch with positive action. 16mm x 29mm face and 56mm overall length including 3 x Lucar/spade connections. 20A rating at 12V DC

Quickly mounts to under dash flange on most cars. Heavy duty 50 amp toggle switch with chrome handle. Use for indicator, fog lights, wiper motors etc. Universal use.

Quickly mounts to under dash flange on most cars. Heavy duty 50 amp toggle switch with chrome handle. Use for fog lights, wiper motors or any universal use.

Red 12V illuminated toggle switch. 1.2W BA7S bulb. 12.5mm panel aperture/hole fixing. Maximum panel thickness 7mm. 6.3mm LUCAR terminal connections.

Green 12V illuminated toggle switch. 1.2W BA7S bulb. 12.5mm panel aperture/hole fixing. Maximum panel thickness 7mm. 6.3mm LUCAR terminal connections.

Blue 12V illuminated toggle switch. 1.2W BA7S bulb. 12.5mm panel aperture/hole fixing. Maximum panel thickness 7mm. 6.3mm LUCAR terminal connections.

Amber 12V illuminated toggle switch. 1.2W BA7S bulb. 12.5mm panel aperture/hole fixing. Maximum panel thickness 7mm. 6.3mm LUCAR terminal connections.

Fascia plate for metal toggle switches with 13mm bodies

Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection terminals will require wires to be soldered in place.  -- Two position, single pole with stainless steel cover. Chrome plated brass lever Solder terminals 6.5mm panel hole 5amp at 28 Volts DC rating

Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection terminals will require wires to be soldered in place.  --

Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection terminals will require wires to be soldered in place. 

On/On toggle switch. On-On applications dip beam to main beam, fuel change over etc. Equivalent to original Lucas part number 34889.

Toggle headlight switch Off/On/On. Ideal for Off/Sidelight/Headlight, 2 speed heater switch, etc. Equivalent to Lucas part number 31788.

Toggle switch used on many vehicles from Austin, Bedford, Morris and Wolseley. Equivalent to Lucas part number 31780. Two way On/Off switch ideal for fan, wiper on/off etc.

Made in England. On/On changeover heavy duty metal toggle switch rated at 25A at 12V. Approx. 12.5mm hole required.

Heavy duty metal toggle switch. ON/OFF/ON (indicator function). 25amp rating. Approx. 12.5mm hole required.

Toggle switch, on/off only, requires hole through metal panel 13mm. Nickel plated toggle lever, Lucar type 6.3mm spade terminals.

Made in England.  Off/On/On heavy duty metal toggle switch rated at 10A at 12V. Approx. 12.5mm hole required.

Made in England. Momentary Off/On heavy duty metal toggle switch rated at 25A at 12V. Approx. 12.5mm hole required.

Momentary toggle switch Off/On. Applications include headlamp flash, screen washer etc. Equivalent to Lucas part number SPB204. 6.3mm blade terminals.  5 amps at 12v DC. Approximately 14.5mm panel hole required. Maximum panel thickness 2.2 mm. Toggle length 26mm.

Toggle switch 2 position, equivalent to Lucas part number SPB200. 6.3mm blade terminals. 5 amps at 12v DC. Approximately 14.5mm panel hole required. Maximum panel thickness 2 mm, lever length 26mm.

Amber LED illuminated chrome toggle switch Off/On. 12 v 25 amps. AMBER illuminated end.

Blue LED illuminated chrome toggle switch Off/On. 12 v 25 amps. BLUE illuminated end.

Green LED illuminated chrome toggle switch Off/On. 12 v 25 amps. GREEN illuminated end.

Red LED illuminated chrome toggle switch Off/On. 12 v 25 amps.  RED illuminated end.

Metal toggle indicator switch ON/OFF/ON. Aluminium machined end. Approx. 12.5mm panel hole required.

BLACK LED ILLUMINATED SWITCHES OFF/0N AMBER illuminated end.

A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15 amps.

A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15 amps. --

A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15 amps. --

A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15 amps. --

A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15 amps. --

Toggle Switch On/Off/On (Indicator function). Equivalent to Lucas part number 31743. 6.3mm Lucar/blade terminals. 10 amp rating at 12V DC. Approx. 14.5mm panel hole required. Maximum panel thickness 3.1mm. Lever length 34mm.

Illuminated indicator switch. Small Illuminated switch - ON/OFF/ON.  Approx. 16.5mm mounting hole required. These come fitted with a 12v bulb, however these can be change to suit the following 6v (B279s)  12v (B280B)  24v (B687)

Toggle switch for two speed wiper with park position. Equivalent to Lucas part number 35927. Also part numbers BHA4786, 57SA.

Speedwell switch extension (as used on rally Mk1 and Mk2 Mini) fits over Lucas toggle switches e.g. SPB200, SPB204 etc.