Replacement dash control regulator bladder bag, with outer brass sleeve housing. This fits inside the dashboard housing.

Suitable for the medium size vehicle of approx 1500kg weight. Enamel finish, ready to fit. External round pressure bag fitted under Hydro dial with copper pipe connection fitted, one blade into two blades at friction end 4 1/2" (104mm) diameter. Minimum arm (blade) lengths 4 1/2", maximum length 10". Single arm ( blade) normally the longest on un-equal arm units.  Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.

Andre Telecontrol pump reservoir. Dimensions: overall length 6.25", main body 4.8" long, 1.75" diameter, end caps 1.8" diameter. Supplied with T piece & non return ball & spring.

Andre telecontrol dash hand control unit, complete with knob and pre-filled internal regulator bag and housing. Dimensions:- body length 4.562", body diameter 1.75", mounting hole centres 1.15". To fit, pre-fill pipes leading to regulator, unwind knob to release pressure, remove blanking plug (keep this end uppermost so as to not lose fluid) and connect pipework, bleed system as a brake system. USE ONLY 30% GLYCERINE/WATER OR ANTIFREEZE MIX. DO NOT USE BRAKE FLUID, MINERAL OIL, ATF etc.

Andre telecontrol front and rear pressure gauges for mounting in dash panel. White digits on black background. Chrome rim. Gauge body diameter 1.575", bezel diameter 1.73". -- rear pressure gauge

Andre telecontrol front and rear pressure gauges for mounting in dash panel. White digits on black background. Chrome rim. Gauge body diameter 1.575", bezel diameter 1.73". -- front pressure gauge

Andre telecontrol front and rear pressure gauges for mounting in dash panel. White digits on black background. Chrome rim. Gauge body diameter 1.575", bezel diameter 1.73".

Round Andre Telecontrol pressure bag. Fits on outside of Telecontrol unit under the metal rounded cover. 91mm diameter, 9mm thick at edge, 17mm thick at centre.

Rectangular type expander bag for shock absorber. 98mm long x 44mm wide x 9mm thick, with 19mm diameter in centre.

Red, white & black printed indicator dial with raised edge. 105mm diameter. Andre Hydro telecontrol shock absorber type HT33. Used on square bag type. Note three holes.

Type HFC, white print on black domed dial, 82mm diameter. Used on external round pressure bag type.

Replacement Andre telecontrol control regulator adjuster knob. As original pattern with brass fitting sleeve.

Suitable for the medium size vehicles of approx 2000kg or competition vehicles. Enamel finish, ready to fit. to fit. External round pressure bag fitted under Hydro dial with copper pipe connection fitted, two blades into three blades at friction end 4 1/2" (102mm) diameter Minimum arm (blade) length 4.1/2", maximum length 10". Two blade arm normally the longest on un-equal arm units. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.