View Basket0 item(s) in the basket.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
A super reproduction of the "Owl Eye" rear lamp from Toby - originally for 'stop', tail and reversing function. A quality recreation of the original Lucas type 312B lamp. Chrome plated finish on all brass pressings, supplied with red and clear (as shown) or red and amber main diffused pattern lenses - please select required lens combination from the 'Drop Down' option box. Number plate illumination on underside. Size approx. 152mm wide x 105mm tall x 65mm deep. Please note that the main, large lenses can be interchanged for fitting to the left or right of vehicle. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Uses 3 x BA15D bulbs. For spare bulbs please see our B317 (6v) stop light/indicator/reverse B206 (6v) side light or B335 (12v) stop light/indicator/reverse or B209 (12v) side light. Making Owl-eye Rear Lamps
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable equivalent to the Lucas L494. Clear reverse lamp is Ford part reference 204E-15500. For bulbs please see our B317 (6v) or B382 (12v). --
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire connection all surrounded with a rubber seal. Very similar in design to some classic Wipac lights of the sixties, including the 210 type. 12v x 10 watt festoon bulb. Choice of clear lens for a reversing lamp, red lens for an auxiliary rear warning light and amber for indicator function. For spare bulbs please see our B1240 (6v) or B273 (12v). --
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire connection all surrounded with a rubber seal. Very similar in design to some classic Wipac lights of the sixties, including the 210 type. 12v x 10 watt festoon bulb. Choice of clear lens for a reversing lamp, red lens for an auxiliary rear warning light and amber for indicator function. For spare bulbs please see our B1240 (6v) or B273 (12v). --
1259 type reversing light. Stainless steel body with clear glass lens. Fitted with a 12 volt 21 watt halogen bulb. W 115mm D 71 mm H 57mm total H 91mm
L539 type clear lensed reverse light or front side lamp/indicator. Please specify single contact (BA15S) bulb for reversing or twin (BAY15D) contact bulb holder for USA front side light and indicator. Diameter 83 mm. Application sinclude Austin, Bentley, Bristol, Cobra, MG, Riley, Rolls Royce, Rover, Vauxhall.
Clear lensed reversing light equivalent to the Lucas L691 type. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, Cobra and Morgan.
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen bulb 12v x 20 watt - part number B446 (H3-20-12V). Upgrade with LED lamp H3LED-P65 if required. Choice of - clear lens for a reversing lamp, red lens for an auxillary rear warning lamp and amber lens for indicator. -- Polished stainless steel (110mm x 55mm x 80mm deep) with clear polycarbonate lens. Single bolt fixing allows choice of mounting. H3 halogen bulb 12v x 20watt - part number B446.
