Glass mirror only to fit our CA1318

Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the glass. Offered in choice of polished stainless steel finish, polished brass or nickel plate finish. --

Replacement FLAT mirror glass for Wingard 694 pattern dash mounted mirrors - our part number 584 mirror. Dimensions 146mm long x 55mm tall tapering down to 35mm.

Replacement FLAT mirror glass for our 294 rod mounted mirror, dimensions 150mm long x 54mm tall.

Replacement FLAT mirror glass for our 981 and 982 clamp on mirrors, dimensions 113mm tall x 72.5mm wide.

Oval type CONVEX glass mirror suitable for vehicles of the '30's. Stamped Desmo, with the mounting bracket on the long side of the oval. Head size 110mm tall x 82mm wide, overall length 153mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. Our own manufacture, all brass and bronze British construction, reproduced from an original 'Desmo' pattern. Although these were originally made for right hand mounting on the vehicle, we do offer left hand mounting if specified. --

Oval type CONVEX glass mirror suitable for vehicles of the '30's. Stamped Desmo, with the mounting bracket on the long side of the oval. Head size 110mm tall x 82mm wide, overall length 153mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. Our own manufacture, all brass and bronze British construction, reproduced from an original 'Desmo' pattern. Although these were originally made for right hand mounting on the vehicle, we do offer left hand mounting if specified. --

Oval type CONVEX glass mirror suitable for vehicles of the '30's. Stamped Desmo, with the mounting bracket on the long side of the oval. Head size 110mm tall x 82mm wide, overall length 153mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. Our own manufacture, all brass and bronze British construction, reproduced from an original 'Desmo' pattern. Although these were originally made for right hand mounting on the vehicle, we do offer left hand mounting if specified. --

Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed Desmo. CONVEX mirror glass. Suitable for vehicles of the '30's. Head size 110mm x 82mm, overall length 175mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. Our own manufacture, brass/bronze construction, recreated from an original 'Desmo' mirror pattern, polished brass, chromium or nickel plated finish. Although these were originally made for right hand mounting, we do offer left hand mounting if specified in the option box. --

Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed Desmo. CONVEX mirror glass. Suitable for vehicles of the '30's. Head size 110mm x 82mm, overall length 175mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. Our own manufacture, brass/bronze construction, recreated from an original 'Desmo' mirror pattern, polished brass, chromium or nickel plated finish. Although these were originally made for right hand mounting, we do offer left hand mounting if specified in the option box. --

Rectangular vintage mirror. Arm mounting vintage style rearview car mirror, stamped TOBY. Size 118mm x 67mm, fitted with a clamp for 3/8" (10mm) arm. All brass construction, available with polished brass, chromium or nickel plated finishes. Options for flat or convex (slight wide angle effect) glass. Please select your preferred configuration from the options below. Handmade in Britain. -- Nickel plated brass with convex glass (slight wide-angel view) and stamped with TOBY logo on the back

Rectangular vintage mirror. Arm mounting vintage style rearview car mirror, stamped TOBY. Size 118mm x 67mm, fitted with a clamp for 3/8" (10mm) arm. All brass construction, available with polished brass, chromium or nickel plated finishes. Options for flat or convex (slight wide angle effect) glass. Please select your preferred configuration from the options below. Handmade in Britain. -- Polished brass with convex glass (slight wide-angel view) and TOBY stamped on back

A large circular rear view mirror  5 1/2" (140mm) in diameter. A splendid reproduction of a large windscreen pillar mounted, early motoring mirror. Fitted with a convex glass lens the unit can be adjusted for length. Suitable for most medium to large-sized vehicles. Arm 10mm diameter, length approx 250mm. Clamps on to approx. 22mm diameter rod. British-made, all brass construction, with investment cast bracket fittings, spun brass head, riveted rear fixing and attractive all-brass clamp assembly. This period mirror design is available in polished brass or nickel-plated finish with a rivetted TOBY medallion badge on the back. The TOBY brand is applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed 'Toby Mitchell - Toby - London NW1', the mark Vintage Supplies has applied to its authentic reproductions of selected early pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. CONVEX mirror glass. Particularly suitable for vehicles of the '30s and '40s. Head size 110mm x 82mm, overall length 175mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. Our own manufacture, brass/bronze construction, recreated from an original 'Desmo' mirror pattern, polished brass, chromium or nickel plated finish. Although these were originally made for right hand mounting, we do offer both left and right hand mounting - Please specify your requirement in the drop down option box. -- Nickel plated brass.

Oval-type CONVEX glass mirror suitable for vehicles of the '30's. Stamped TOBY, with the mounting bracket on the long side of the oval. Head size 110mm tall x 82mm wide, overall length 153mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. Our own manufacture, all brass and bronze British construction, reproduced from an original 'Desmo' pattern. Although these were originally made for right-hand mounting on the vehicle, we do offer left-hand mounting if specified. -- Polished Brass, tall oval-shaped mirror

Oval mirror for arm mounting, stamped marked Desmo. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass or chromium or nickel plated finish. CONVEX glass. Desmo stamped to suit left or right mounting. British made, finished and assembled in our workshops. -- Chrome plated brass

Oval mirror for arm mounting, stamped marked Desmo. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass or chromium or nickel plated finish. CONVEX glass. Desmo stamped to suit left or right mounting. British made, finished and assembled in our workshops. -- Nickel plated brass

Large round rear view mirror suitable for the smaller Edwardian car. Flat type arm clamps to the windscreen frame, optimum diameter to clamp to approx 25mm. 5" (128mm) diameter head, offered with flat glass only. Available in polished brass or chrome plated finish. --

Oval vintage mirror with polished stainless steel bracket assembly which will screw to the top rail in the vehicle. Base approx 92mm wide. FLAT mirror glass with an oval rim and back, approx 145mm x 73mm in size. The shaped/embossed mounting bracket attaches to the head with an adjustable ball mounting socket in the back of the mirror case.

A nice, neat FLAT glass vintage interior mirror with shaped glass with a bevel edge. Glass size 126mm x 65mm. The glass is held at the top and bottom with a traditional stainless steel clamp which tightens with three screws onto the adjustable ball of the polished stainless steel mounting arm - 80mm tall x 68mm wide, with 50mm mounting hole centres.

Face mounting larger type vintage interior mirror. FLAT glass 125mm x 66mm which has an attractive bevelled edge. The shaped/embossed mounting bracket (92mm wide) attaches to a bracket, which clamps the top and bottom of the glass, via an adjustable ball socket. Overall mirror height approx 135mm. Offered in polshed stainless steel finish.

Vintage interior rear view mirror with polished stainless steel bracket assembly which attaches to the top rail of open/tourer cars with a screw clamp. Flat mirror glass with oval rim and back, approx. 145mm x 73mm.

Vintage interior rear view mirror with polished stainless steel bracket assembly which attaches to the top rail of open/tourer cars with a screw clamp. Bevel edge flat mirror glass approximately 130mm x 70mm.

A vintage interior rear view mirror that clamps to the top rail of an opening windscreen, to be held in place by screw clamps. Once the mirror has been clamped in place, it is possible to adjust the angle of the glass at a side adjustment point behind the glass. Black finish bracket. Attractive bevel edge mirror glass, approx. 130mm x 70mm.

Replacement CONVEX mirror glass for Desmo 248 and 300 type dash mounted mirrors - our part number 891 and 891A mirrors.

Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Reproduction of a popular style of period mirror produced by Raydyot and Desmo (the very popular Type 36). All brass construction, available in chromium or nickel plated finish, or polished brass. Polished stainless screws to outside of rim. --

Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Reproduction of a popular style of period mirror produced by Raydyot and Desmo (the very popular Type 36). All brass construction, available in chromium or nickel plated finish, or polished brass. Polished stainless screws to outside of rim. --

Rectangular chrome on brass rear view mirror with cast, chrome on bronze triangular mounting bracket, popular on some early MG models. CONVEX glass, Rear of mirror head case stamped Desmo above the mounting stud. Mirror head 118mm wide x 67mm tall, fitted by a single stud to the triangular mounting bracket that is similar in design to the early Lucas style mount - with a flat base plate 95mm long x 15mm wide with two mounting holes at 75mm centres. Overall height from bracket base to top of the mirror head 90mm.

Oval mirror with jointed arm. Fine reproduction of this very popular mirror. Head size 110mm x 82mm, fitted with a CONVEX glass for ease of overtaking, concave base on two hole fixing bracket, width of hole centres 43mm. Overall width 175mm. All brass head and bracket assembly. Offered in polished brass, nickel or chrome plated finish. Very similar in style to the Raydyot M39 model. Please note, unlike our 653 mirror, this mirror is NOT embossed on the back of the mirror head. --

Hand spun brass round mirror head 145mm diameter. A quality reproduction of the Lucas 5 5/8" diameter, 150 model mirror. Supplied with flat or convex glass as originally offered - Type 150L and Type 150 respectively. Fitted with 3/8" (10mm) mounting clamp as standard. Available in chromium or nickel plate finish, or as polished brass. The back of the mirror case is fitted with chrome on brass, 18mm diameter 'Toby' medallion or a stamped TOBY logo on the Polished brass version, as applied to our finest period mirror and lamp recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of select CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell 'Toby' branded high-quality product range. --

Hand spun brass round mirror head 145mm diameter. A quality reproduction of the Lucas 5 5/8" diameter, 150 model mirror. Supplied with flat or convex glass as originally offered - Type 150L and Type 150 respectively. Fitted with 3/8" (10mm) mounting clamp as standard. Available in chromium or nickel plate finish, or as polished brass. The back of the mirror case is fitted with chrome on brass, 18mm diameter 'Toby' medallion or a stamped TOBY logo on the Polished brass version, as applied to our finest period mirror and lamp recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of select CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell 'Toby' branded high-quality product range. --

Hand spun, British-made round brass mirror head, 120mm diameter. A quality recreation of the Lucas 4 3/4" diameter 140 model mirror. Available with convex glass only, as the orignal. Fitted with 3/8" (10mm) mounting clamp as standard. Available as polished brass or in chromium or nickel-plated finish. The back of the nickel and chrome-0plated mirror cases are fitted with an 18mm diameter chrome on brass 'Toby' medallion, as applied to our finest period mirror and lamp recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of select CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell 'Toby' branded high-quality product range. The polished brass version has the same TOBY logo design stamped and filled with black. -- Nickel plated with TOBY medallion to back

Hand spun, British-made round brass mirror head, 120mm diameter. A quality recreation of the Lucas 4 3/4" diameter 140 model mirror. Available with convex glass only, as the orignal. Fitted with 3/8" (10mm) mounting clamp as standard. Available as polished brass or in chromium or nickel-plated finish. The back of the nickel and chrome-0plated mirror cases are fitted with an 18mm diameter chrome on brass 'Toby' medallion, as applied to our finest period mirror and lamp recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of select CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell 'Toby' branded high-quality product range. The polished brass version has the same TOBY logo design stamped and filled with black. -- Chrome plated with TOBY medallion to back

Polished stainless steel clip-on mirror with circular CONVEX glass, 102mm diameter.

Stainless steel clamp brackets suitable for several uses when a plate need be fixed to a round tube. 1/4" (6mm) bolt, round bar size minimum of 19mm - maximum on 25mm diameter. offered in set of two complete units only. Particularly suitable for rally plate, number plate etc.

Large round rear view mirror suitable for the smaller Edwardian car. Flat type arm clamps to the windscreen frame, optimum diameter to clamp to approx 25mm. 5" (128mm) diameter head, offered with flat glass only. Available in polished brass or chrome plated finish. --

Heavy veteran or Edwardian pattern mirror of a style traditionally manufactured by Toby. Flat mirror glass with bevel edge and heavy rim and backing. Head dimensions 172mm x 135mm. Substantial arm approx 270mm long with very secure mounting base plate 50mm x 63mm. This item is offered in polished brass or with nickel plated finish at additional cost and by special order. The mirror head is hand made in our workshops, the base components lost wax cast with the whole assembly finished by ourselves. Fitted with riveted circular brass or nickel plated 'Toby' badge on rear of case, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell’s high quality 'Toby' branded product range.

Small round spun brass mirror. Back of case stamped Desmo. 104mm diameter, flat or convex glass. Fitted with 3/8" (10mm) mounting clamp. Available nickel or chrome plated, or polished brass finish.  --

Small round spun brass mirror. Back of case stamped Desmo. 104mm diameter, flat or convex glass. Fitted with 3/8" (10mm) mounting clamp. Available nickel or chrome plated, or polished brass finish.  --

Small round spun brass mirror. Back of case stamped Desmo. 104mm diameter, flat or convex glass. Fitted with 3/8" (10mm) mounting clamp. Available nickel or chrome plated, or polished brass finish.  --

Larger round mirror, 5 5/8" (145mm) in diameter, stamped Desmo. Supplied with either convex or flat glass. Fitted with a 1/2" (12.7mm) mounting clamp as standard. Available chromium or nickel plated, or in polished brass finish. Hand spun in brass, this vintage mirror is a quality recreation of the Lucas 150 model -  flat glass as Type 150L and convex glass as Type 150. --

Larger round mirror, 5 5/8" (145mm) in diameter, stamped Desmo. Supplied with either convex or flat glass. Fitted with a 1/2" (12.7mm) mounting clamp as standard. Available chromium or nickel plated, or in polished brass finish. Hand spun in brass, this vintage mirror is a quality recreation of the Lucas 150 model -  flat glass as Type 150L and convex glass as Type 150. --

Larger round mirror, 5 5/8" (145mm) in diameter, stamped Desmo. Supplied with either convex or flat glass. Fitted with a 1/2" (12.7mm) mounting clamp as standard. Available chromium or nickel plated, or in polished brass finish. Hand spun in brass, this vintage mirror is a quality recreation of the Lucas 150 model -  flat glass as Type 150L and convex glass as Type 150. --

Round mirror, 4 3/4" (120mm) in diameter, stamped Desmo on rear of case. Supplied with convex glass only as original. Fitted with a 3/8" (10mm) mounting clamp as standard. All brass construction, available chromium or nickel plated, or in polished brass finish. This handmade British mirror is very similar in size and appearance to the Desmo No.52PI and Lucas 140 model mirrors.  --

Round mirror, 4 3/4" (120mm) in diameter, stamped Desmo on rear of case. Supplied with convex glass only as original. Fitted with a 3/8" (10mm) mounting clamp as standard. All brass construction, available chromium or nickel plated, or in polished brass finish. This handmade British mirror is very similar in size and appearance to the Desmo No.52PI and Lucas 140 model mirrors.  --

Round mirror, 4 3/4" (120mm) in diameter, stamped Desmo on rear of case. Supplied with convex glass only as original. Fitted with a 3/8" (10mm) mounting clamp as standard. All brass construction, available chromium or nickel plated, or in polished brass finish. This handmade British mirror is very similar in size and appearance to the Desmo No.52PI and Lucas 140 model mirrors.  --

Oval mirror for arm mounting, stamped marked Desmo. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass or chromium or nickel plated finish. CONVEX glass. Desmo stamped to suit left or right mounting. British made, finished and assembled in our workshops. --

Rectangular, arm mounting mirror, stamped Desmo. Size 118mm x 67mm, fitted with a clamp for 3/8" (10mm) arm. All brass construction, available with polished brass, chromium or nickel plated finish, as well as either flat or convex glass. Please select your preferred configuration from the options below. Handmade in Britain. -- convex glass

Replacement mirror glass for 653 Desmo or CA1262 Raydyot type oval knuckle mount mirror - CONVEX or FLAT offered, please select from the option box.

Replacement CONVEX mirror glass for Lucas type 160 (our 395 part number) mirrors, 152mm x 75mm.

Replacement CONVEX mirror glass for our part number 514 (Desmo type 36) mirrors - glass nominal 155mm long x 75mm wide x 3mm

Oval type exterior mirror with flat glass suitable for vehicles of the '30's Long head size -128mm x 81mm and overall length of 196mm. Complete with concave base mounting bracket 58mm x 14mm, hole centres 36mm approx. Note period triangular/diamond shaped mounting arm/rear case pressing detail to the mounting edge of rear of mirror. All brass and bronze British construction, chromium plated finish only.

Polished stainless steel interior rear view mirror. Mirror head 128mm x 56mm with stainless steel backing and edge rim. Mounting arm 44mm long with a 58mm x 16mm mounting pad, hole centres at 40mm, ball held by traditional mirror clamp bracket, overall depth 36mm.

Polished stainless steel FLAT glass interior mirror with a chrome offset arm, originally early VW applications. Mirror head measures 155mm x 60mm, mounting arm is 175mm tall with a 'shield' shaped mounting bracket, 54mm wide x 63mm tall, with three 5mm mounting holes. The bracket incorporates a clamping plate. The arm offset is to the right of the mirror head, distance from each edge to centre of arm - long 95mm, short 60mm.

Polished stainless steel flat glass interior mirror with chrome finish swan neck arm. Mirror head measures 118mm x 54mm, mounting arm is 80mm tall with mounting bracket 50mm x 20mm, holes centres at 36mm.

Polished stainless steel mirror head fitted with FLAT glass, 118mm x 55mm head size with single stud mounting, to fit directly into an arm - not supplied. Stud shaft diameter 6.3mm with two flats at 5mm wide x 7.8mm long, 4.5mm thread x 6.8mm long. Supplied with chrome conical nut with two 12mm flats to tighten - nut size 3/16" No.10 UNC / 24tpi.  22mm diameter x 13mm deep.  

Dash mirror on adjustable height stem, as fitted to the Jaguar XK140. Fixed, rectangular two screw base size 51mm x 21mm with mounting holes at 31mm centres, angled away from the screen. Metal backed FLAT glass with ball pivot in rear of casing. Mirror head 105mm x 45mm. Stem height adjusts from min 80mm to max 150mm high. All chrome finish.

Black surround to mirror, chrome stem. Mirror is 120 x 55 mm and 85 mm overall height. Hole spacing is approx 39mm

Single stud mounted FLAT glass rear view mirror. Large mirror head 160mm x 82mm. Flat glass with chrome surround and back. Overall height 120mm. The actual arm is 75mm tall - to the mirror bolt - the same as mirror 706. Unlike 706, this mirror case is plain and not stamped.

Reproduction interior rear view mirror equivalent to the Lucas 308 type. Large CONVEX mirror glass - mirror head 140mm x 43mm. Elegant two screw hole base mount as shown with 40mm hole centres. Chrome on brass finish. Overall mirror height approx 117mm

Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm. --

Self adhesive interior mirror, with large 155mm x 60mm size mirror head. Stainless steel mirror edge and back. Black plastic stem with self adhesive pad.

Lightweight mirror. Black plastic surround to mirror, black plastic stem with self-adhesive attachment onto glass. Mirror is 120 x 55 mm and 85 mm overall height. Centre of mounting ball to pad approx. 40 mm.

Dash mounted interior mirror with single bolt fixing and CONVEX mirror glass. Mirror head 110mm x 65mm. Chromium plated finish, 120mm overall mirror height. Early 'Desmo' pattern, stamped Desmo on the rear of the case above the fixing stud. Used on several sports cars including MG.

Interior rear view mirror with stainless steel head and chrome stem as fitted to MGA etc. FLAT glass, head size approx 130mm x 57mm, with stainless steel outer edge protection. Mounting stem base 58mm x 14mm with two mounting holes at 40mm centres. Maximum overall height fitted 93mm. Adjustable ball socket in back of mirror case.

Interior rear view mirror with polished stainless steel back and adjustable vball mount in the back of the mirror case. CONVEX glass. Mirror head 127mm x 54mm. Mounting arm approximately 85mm high. Approx. 100mm overall mirror height. Two mounting holes in base at 36mm centres. Base dimensions 50mm x 25mm. The mounting arm leans away from screen/is angled on the base.

Interior rear view mirror with polished stainless steel back with adjusting ball socket. FLAT glass. Large 172mm x 62mm mirror head. Mounting arm approx 85mm high. Approx 105mm overall mirror height. Two mounting holes at 36mm centres. Base dimensions  50mm x 25mm. The mounting arm leans away from screen/is angled on the base.

Original new/old stock Wingard 702A interior mirror, oblong FLAT glass (150mm x 60mm) mounted in a black crackle finish frame, stem length to the ball centre 70mm, with 31mm fixing hole centres.

Original new/old stock Wingard 693A interior mirror, oblong FLAT glass (105mm x 42mm) mounted in a black crackle finish frame, stem length to the ball centre 70mm, with 31mm fixing hole centres.

Polished stainless steel backed interior mirror which clamps to windscreen surround with a substantial chrome on brass swan neck bracket with stepped attachment fitting, original application early mini. Mirror head 155mm x 61mm with flat glass. Ball on swan neck bracket fits into traditional pressed stainless steel clamp brackets. 110mm from the bottom mounting face to the neck ball.

Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm. --

Dash mounted Wingard 694 head pattern mirror, 2 screw base fitting 25mm x 53mm, holes 31mm centres. All chrome, metal backed FLAT glass mirror 5 7/8" x 2 3/8" (148mm x 60mm), 110mm overall height.

Classic rod mounted (not supplied) interior mirror. Fits on the centre strut on early MGBs though can also be used on Jaguar E Types and some Cobras. 

Exterior rear view mirror equivalent to the original Lucas Type 160 mirror. Also very similar to the Eversure No.31 model. 6" x 3 1/4" (152mm x 82mm). CONVEX glass only providing an excellent field of view. 1/2" (12mm) rod diameter clamp as standard - can be changed if required to 7/16" diameter clamp, please indicate your requirement in 'customer comments' at the checkout. Backing plate held in place with 4 screws into internal bracketry. Original equipment for many '30s vehicles including those from MG and Bentley. Pressed brass, stamped Type No 160, Birmingham, England around the centre back of the case. Hand finished and assembled in our workshops. Offered with chrome or nickel plated finish and with or without a period 'Toby' medallion in the back of the mirror casing, as applied to our finest period mirror and lamp recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of select CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Exterior rear view mirror equivalent to the original Lucas Type 160 mirror. Also very similar to the Eversure No.31 model. 6" x 3 1/4" (152mm x 82mm). CONVEX glass only providing an excellent field of view. 1/2" (12mm) rod diameter clamp as standard - can be changed if required to 7/16" diameter clamp, please indicate your requirement in 'customer comments' at the checkout. Backing plate held in place with 4 screws into internal bracketry. Original equipment for many '30s vehicles including those from MG and Bentley. Pressed brass, stamped Type No 160, Birmingham, England around the centre back of the case. Hand finished and assembled in our workshops. Offered with chrome or nickel plated finish and with or without a period 'Toby' medallion in the back of the mirror casing, as applied to our finest period mirror and lamp recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of select CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Highly polished stainless steel finish, 2 1/2" X 6" mirror head, with chrome plated mirror arm. Perfect replica interior mirror for early Cobras and other classic applications.

Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected. Offered with a long or short stem. Short stem height 35mm to ball on mirror back. Long stem height 105mm. Two screw holes (at 30mm centres) in a mounting base of dimensions 48mm x 20mm.

Large rectangular suction mirror, FLAT glass, with swivel adjustment. Black plastic back and surround 156mm x 68mm. Suction pad 53mm diameter.

Rectangular suction mirror, FLAT glass, with swivel adjustment. Black plastic back and surround 120mm x 56mm. Suction pad 53mm diameter.

Face/top rail mounting larger type vintage interior mirror with upper lip on bracket. FLAT glass 125mm x 65mm, with an attractive bevel edge and shaped ends. The mounting bracket is triangular with a top lip and measurses 88mm at its widest point. The bracket clamps with three screws and locking nuts to the top and bottom of the glass. Two screw mounting holes at 53mm centres. Overall mirror height approx 105mm. Good quality fittings in polished stainless steel.

Reproduction interior rear view mirror equivalent to the pre-War Lucas 309L type. CONVEX mirror glass. Mirror head 4” by 1 ¾” (100mm x 43mm). Two screw hole base mount as shown, with 40mm hole centres. Chrome on brass finish. Overall height approx 117mm. A good quality small driving mirror which reflects a panoramic view. It can be mounted on the dashboard without obstructing the driver's vision. A smooth positive ball joint allows for easy adjustment. The  mirror glass is held by a clip that allows easy removal for cleaning. Chrome on brass finish. Very similar in design to the Desmo No. 248 model, though the bottom fixing of that mirror is hinged.

Black plastic interior mirror, head size 125mm x 55mm. With chrome on brass clamp for clamping to a rod of maximum 5mm diameter - not supplied. 36mm from rod mounting hole to centre of ball mounting on mirror back.

Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting bracket. Suitable for top or bottom fixing, short cast bronze fixed length arm. Available in chrome or nickel plated finish. Base mounting hole centres approx 37mm. This mirror is very similar to the Desmo 300 model (part number 891) except that it is not telescopic. --

Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting bracket. Suitable for top or bottom fixing, short cast bronze fixed length arm. Available in chrome or nickel plated finish. Base mounting hole centres approx 37mm. This mirror is very similar to the Desmo 300 model (part number 891) except that it is not telescopic. --

Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is suitable for top or bottom fixing. Adjustable height arm - from an approx. min of 115mm to a max of 160mm. Available in chrome or nickel plated finish. Base mounting hole centres approx 37mm apart. --

Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is suitable for top or bottom fixing. Adjustable height arm - from an approx. min of 115mm to a max of 160mm. Available in chrome or nickel plated finish. Base mounting hole centres approx 37mm apart. --

Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is suitable for top or bottom fixing. Adjustable height arm - from an approx. min of 115mm to a max of 160mm. Available in chrome or nickel plated finish. Base mounting hole centres approx 37mm apart.

Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected. Offered with a long or short stem. Short stem height 35mm to ball on mirror back. Long stem height 105mm. Two screw holes (at 30mm centres) in a mounting base of dimensions 48mm x 20mm. --

Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected. Offered with a long or short stem. Short stem height 35mm to ball on mirror back. Long stem height 105mm. Two screw holes (at 30mm centres) in a mounting base of dimensions 48mm x 20mm. --

Suction mirror for interior use. Fitted to windscreen with suction cup. FLAT glass, stainless steel back and edge rim. Head size 156mm x 63mm.

Interior FLAT glass mirror on stalk. Stainless steel rim and backing with chrome plated mounting. Large head size 154mm x 62mm, overall height approx 95mm. Base 58mm x 16.5mm with 38mm mounting hole centres. Traditional pressed stainless steel adjustable clamp. Please note a protective plastic film needs to be removed from the face of the glass before use.

Polished stainless steel backed interior mirror which clamps to a rod of maximum 5mm diameter (not supplied). 153mm x 56mm mirror head with FLAT glass.

Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Reproduction of a popular style of period mirror produced by Raydyot and Desmo (the very popular Type 36). All brass construction, available in chromium or nickel plated finish, or polished brass. Polished stainless screws to outside of rim. --

Oval mirror with jointed arm. Fine reproduction of this very popular mirror. Head size 110mm x 82mm, fitted with a CONVEX glass for ease of overtaking, concave base on two hole fixing bracket, width of hole centres 43mm. Overall width 175mm. All brass head and bracket assembly. Offered in polished brass, nickel or chrome plated finish. Very similar in style to the Raydyot M39 model. Please note, unlike our 653 mirror, this mirror is NOT embossed on the back of the mirror head. --

Oval mirror with jointed arm. Fine reproduction of this very popular mirror. Head size 110mm x 82mm, fitted with a CONVEX glass for ease of overtaking, concave base on two hole fixing bracket, width of hole centres 43mm. Overall width 175mm. All brass head and bracket assembly. Offered in polished brass, nickel or chrome plated finish. Very similar in style to the Raydyot M39 model. Please note, unlike our 653 mirror, this mirror is NOT embossed on the back of the mirror head. --

Chrome finish, clamp to door frame edge, stainless steel exterior mirror. FLAT glass head 112mm diameter, on an arm approx 135mm long. Adjustment to mirror head angle is achieved by slackening a screw in the arm. The base measures approx. 36mm high x 19mm wide and will grip on to max. thickness of 5mm. Please note that the grub screw base is itself held on the chrome arm base with another screw.

Quarterlight clamp on stainless steel mirror. FLAT glass 115mm x 70mm with stainless steel back mounted on a curved arm. Arm extends out 55mm from mounting screws and then 65mm up to the centre of the mirror head. Two grub screws nip the assembly to the edge of the opening quarterlight. Universal mirror that will fit on either the left or right hand side of the vehicle.

Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long ArmC - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long ArmC - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long ArmC - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long ArmC - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long ArmC - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only  - in which case, the backing nut is not supplied as this comes with the arms and differs. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection below, along with flat or convex glass. All four arms mount through a 16mm hole in the panel and protrude 50mm under. Arm A  -Straight, 105mm long Arm B - Curved, 110mm long Arm C - Adjustable, 103mm long Arm D - Short, 70mm long Alternatively, we offer the mirror head only - in which case, the backing nut is not supplied as this comes with the arms and differs - the thread is 1/4" UNF. --

Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years.  Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror head, with chromium stem and single M8 mounting stud. We offer this mirror in handed pairs with either CONVEX or FLAT glass, or left or right handed mirros individually with CONVEX glass. Rubber pad supplied for mounting footprint dimensions 42mm x 32mm. Chrome plated finish only. This is possibly the most popular vintage and classic mirror. Very similar in design to the Eversure model No 44, Tudor No.4 and the Desmo No.165. --

Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years.  Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror head, with chromium stem and single M8 mounting stud. We offer this mirror in handed pairs with either CONVEX or FLAT glass, or left or right handed mirros individually with CONVEX glass. Rubber pad supplied for mounting footprint dimensions 42mm x 32mm. Chrome plated finish only. This is possibly the most popular vintage and classic mirror. Very similar in design to the Eversure model No 44, Tudor No.4 and the Desmo No.165. -- Please select convex of flat glass using the 'drop down' option box

Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years.  Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror head, with chromium stem and single M8 mounting stud. We offer this mirror in handed pairs with either CONVEX or FLAT glass, or left or right handed mirros individually with CONVEX glass. Rubber pad supplied for mounting footprint dimensions 42mm x 32mm. Chrome plated finish only. This is possibly the most popular vintage and classic mirror. Very similar in design to the Eversure model No 44, Tudor No.4 and the Desmo No.165. -- Please select convex of flat glass using the 'drop down' option box

Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years.  Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror head, with chromium stem and single M8 mounting stud. We offer this mirror in handed pairs with either CONVEX or FLAT glass, or left or right handed mirros individually with CONVEX glass. Rubber pad supplied for mounting footprint dimensions 42mm x 32mm. Chrome plated finish only. This is possibly the most popular vintage and classic mirror. Very similar in design to the Eversure model No 44, Tudor No.4 and the Desmo No.165. --

Superb classic chrome mirror that screws to a mounting plate that your attach to your door. Typical of the type used in late 1960's and 1970's. Ideal for many classic cars such as the Mini, MG etc. Mirror head 145mm x 90mm, base footprint approx 85mm x 33mm. FLAT glass. Plinth fixing hole centres 35mm. Offered for left OR right hand door fitting applications. --

Superb classic chrome mirror that screws to a mounting plate that your attach to your door. Typical of the type used in late 1960's and 1970's. Ideal for many classic cars such as the Mini, MG etc. Mirror head 145mm x 90mm, base footprint approx 85mm x 33mm. FLAT glass. Plinth fixing hole centres 35mm. Offered for left OR right hand door fitting applications. --

Wheel mount rear view mirror of our own manufacture, secured to the wheel with two 770mm long x 25mm wide leather straps - brown or black leather straps are available, please select your preferred option. Brass construction, 120mm or 145mm diameter round mirror head, flat or convex glass. Supplied in a choice of chrome, nickel or polished brass finish. This mirror has various adjustment points to cover most applications. We do not advise use of this mirror if wheel discs are fitted on to the wheel. Mirror base size is 194mm x 72mm. Heavywight base casting with machined components all hand assembled in our workshops. --

Wheel mount rear view mirror of our own manufacture, secured to the wheel with two 770mm long x 25mm wide leather straps - brown or black leather straps are available, please select your preferred option. Brass construction, 120mm or 145mm diameter round mirror head, flat or convex glass. Supplied in a choice of chrome, nickel or polished brass finish. This mirror has various adjustment points to cover most applications. We do not advise use of this mirror if wheel discs are fitted on to the wheel. Mirror base size is 194mm x 72mm. Heavywight base casting with machined components all hand assembled in our workshops. --

Wheel mount rear view mirror of our own manufacture, secured to the wheel with two 770mm long x 25mm wide leather straps - brown or black leather straps are available, please select your preferred option. Brass construction, 120mm or 145mm diameter round mirror head, flat or convex glass. Supplied in a choice of chrome, nickel or polished brass finish. This mirror has various adjustment points to cover most applications. We do not advise use of this mirror if wheel discs are fitted on to the wheel. Mirror base size is 194mm x 72mm. Heavywight base casting with machined components all hand assembled in our workshops. --

Round lightweight alloy racing mirror. 4" (100mm) diameter, 90mm deep, single bolt fixing at base. FLAT glass.

Quarterlight glass type clamp on stainless steel mirror. CONVEX glass 115mm x 73mm, with stainless steel mirror back and straight bracket. Two screws nip the assembly to the edge of the opening quarterlight, to suit either the right hand or left hand side.

Gutter mount type clamp on stainless steel mirror. CONVEX glass 115mm x 73mm with stainless steel mirror back and cranked mounting bracket. Two screws nip the assembly to the right hand side of the vehicle -  to suit the left hand side of the vehicle, the stainless steel bracket will require re-bending slightly.

Spare wheel mounted rear view mirror, chrome finish, 115mm diameter flat glass, complete with tan leather strap 560mm long. Longer leather straps are available if required at an extra cost - please enquire.

Polished aluminium racing/bullet mirror, 4" (100mm) diameter and approximately 100mm deep. Currently only available with flat glass lens held in adjustable head section, with screw adjustment. Single bolt mounting (M8 x 30mm long) on base of dimensions 57mm x 20mm. Supplied with a rubber base gasket.

Pair of 50's style chromed wing mirrors - single bolt fixing. Supplied with rubber gaskets. Head size 111mm and stands approx 140mm high, base length 59mm.

As original pattern, smoke grey paint finish, flat glass, for 100E and 103E. Plain flat glass with ball clamp fitting to stem. Hand finished glass size approx 132mm x 46mm. Overall height 107mm. Lost wax cast bronze base, size 59mm x 16mm with two screw holes 40mm centre to centre.

Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the glass. Offered in choice of polished stainless steel finish, polished brass or nickel plate finish.

Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the glass. Offered in choice of polished stainless steel finish, polished brass or nickel plate finish. --

Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the glass. Offered in choice of polished stainless steel finish, polished brass or nickel plate finish. --

Heavy veteran or Edwardian pattern mirror of the style manufactured by Toby. Flat mirror glass with heavy rim and backing. Head 144mm diameter. Substantial arm approximately 270mm long with very secure mounting base plate 50mm x 63mm. This item is offered in polished brass finish, or nickel plated finish at additional cost and by special order. All brass construction, handmade in Britain. Fitted with a riveted circular brass or nickel plated 'Toby' badge on the rear of the mirror case, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell’s high quality 'Toby' branded product range.

Dash mirror on adjustable height stem, two screw, rounded swivel type base of size 58mm x 25mm. Slotted holes in base with centres between approximately 37mm and 43mm apart. Metal backed FLAT glass with ball pivot in rear of casing. Mirror head size 105mm x 45mm. Stem height adjusts between min 80mm and max 150mm high. A ll chrome finish.

Rounded lightweight alloy racing mirror with rim, 4" (100mm) diameter, single 7mm approx bolt fixing. FLAT glass. The base is riveted and the rim held in place with screws. Self colour. A reproduction of the classic Raydyot design.

Wing mounted bullet/racing mirror, polished alloy, 4" (100mm) diameter with CONVEX glass. Aerodynamically styled, fully adjustable and vibration free. 110mm long with two bolt base of dimensions 93mm x 27mm with mounting hole centres approx 51mm apart.

ITAL exterior door mirror, polished stainless steel head with CONVEX glass 113mm in diameter. Mounted on a chrome plinth with a single bolt fixing and a locating peg - approximately 29mm between centres. Supplied with a rubber base gasket. Mirror footprint 90mm x 30mm at the widest point. This very popular mirror can also be used as a wing mirror.

New unused original stock part of the Rallye classic outside mirror. Manufactured by Vitaloni of Italy. This mirror is for LEFT side of vehicle mounting only and it will not transpose to mount on other side. Chrome plated classic angular shape body with FLAT glass. Size 124mm x 85mm x 93mm deep. Flat mounting base of dimesions 35mm x 67mm, with two bolt holes with centres 52mm apart. A great classic mirror for LHD vehicles.

Clamp on circular mirror which will fit to either the left or right side of the vehicle. The head is approx. 3" (78mm) in diameter. Stainless steel mirror back with FLAT glass, mounted on curved chrome plated arm (approx 65mm long) that clamps to the door edge etc. A useful 'peep' mirror. To adjust the mirror for fitting to the opposite side of the vehicle, the clamp bracket can be turned round.  For a 4" version, please see part number MIR016.

A pair of 1950's style chromed wing mirrors. Round mirror head on curved arm for mounting on to the wing or door. A single M8 mounting bolt, requiring an 8mm clearance hole in the panel, on shaped base of dimensions 58mm x 18mm. The chrome arm slopes out and toward the rear. Polished stainless mirror head with CONVEX glass approx 112mm diameter.  Supplied complete with rubber base gaskets. Offered in PAIRS only.

A lightweight BLACK coated, alloy racing mirror. A reproduction of the Raydyot "Grand Prix" style model, popular on Cobras and many racing cars. The FLAT mirror glass is approx 3 1/2" (90mm) diameter. The mirror body is approximately 102mm diameter, with the shell approximately 78mm front to back. The base is 40mm diameter and fitted with an M6 stud, nut and washer.

Polished stainless steel backed interior mirror which clamps to a rod of maximum 5mm diameter (not supplied). Mirror head 155mm x 61mm with FLAT glass. Chrome on brass clamp assembly with pressed stainless steel ball clamp brackets. 65mm mirror face to rod mounting hole dimension.

4" diameter circular 'Peep' mirror. Clips on to door or quarterlight frame with an adjustable bracket. Good quality, stainless steel mirror head and chrome arm. A well made part to improve your car and help address the 'blind spot' problem. This is 4" version of part number CA1377.

Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm.

Satin finish stainless steel FLAT glass interior mirror with a chrome offset arm, as originally used on the VW T2. Mirror head measures 155mm x 60mm, mounting arm is 85mm tall with mounting bracket 50mm x 20mm, holes centres at 36mm. The arm offset is to the right of the mirror head, distance from each edge to centre of arm - long 95mm, short 60mm.

Polished stainless steel suction interior rear view mirror. Mirror head size 128mm x 56mm, with stainless steel backing and edge rim. 62mm diameter suction pad held by traditional mirror clamp bracket. Overall depth from suction pad to mirror face 70mm.

Polished stainless steel oval mirror head fitted with FLAT glass. Head size 144mm x 70mm with single stud mounting to fit directly into an arm - not supplied. Stud shaft diameter 6.3mm, with two flats at 5mm wide x 4mm long, 4.5mm thread x 6.8mm long. Supplied with chrome conical nut with two 12mm flats to tighten - nut size 3/16" No.10 UNC / 24tpi - 22mm diameter x 13mm deep.

Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting bracket. Suitable for top or bottom fixing, short cast bronze fixed length arm. Available in chrome or nickel plated finish. Base mounting hole centres approx 37mm. This mirror is very similar to the Desmo 300 model (part number 891) except that it is not telescopic.

Oval mirror for arm mounting, stamped marked Toby. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass or chromium or nickel-plated finish. CONVEX glass. Toby stamped. British-made, finished and assembled in our workshops. -- Nickel plated brass

A large circular rear view mirror  5 1/2" (140mm) in diameter. A splendid reproduction of a large windscreen pillar mounted, early motoring mirror. Fitted with a convex glass lens the unit can be adjusted for length. Suitable for most medium to large-sized vehicles. Arm 10mm diameter, length approx 250mm. Clamps on to approx. 22mm diameter rod. British-made, all brass construction, with investment cast bracket fittings, spun brass head, riveted rear fixing and attractive all-brass clamp assembly. This period mirror design is available in polished brass or nickel-plated finish with a rivetted TOBY medallion badge on the back. The TOBY brand is applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --