Single point mounting stud for our oval part number CA1262 Raydyot type and 653 Desmo type mirrors, allowing them to be fitted in place with a SINGLE bolt/screw. This fitting replaces the standard two hole mounting bracket, and is ideal for use in limited spaces or where you don't want two holes. Dimensions 25mm long x 15mm diameter, 14.3mm diameter ball to fit the adjustable mirrror coupling on part number 653/CA1262 mirrors. 6mm hole through the centre to take the fixing type/length of your choice. Availalble in polished brass, nickel or chrome plated finish - please select from the options below. --

Single point mounting stud for our oval part number CA1262 Raydyot type and 653 Desmo type mirrors, allowing them to be fitted in place with a SINGLE bolt/screw. This fitting replaces the standard two hole mounting bracket, and is ideal for use in limited spaces or where you don't want two holes. Dimensions 25mm long x 15mm diameter, 14.3mm diameter ball to fit the adjustable mirrror coupling on part number 653/CA1262 mirrors. 6mm hole through the centre to take the fixing type/length of your choice. Availalble in polished brass, nickel or chrome plated finish - please select from the options below. --

Triangular mirror mounting bracket, similar to the Lucas style mount used on some MG's. Flat base plate 140mm x 19mm with hole centres 119mm apart. Two 9mm diameter rods connect the plate to the mirror head boss, overall bracket height 90mm. Lost wax cast in bronze, available in chrome plated finish only.

Triangular mirror mounting bracket, similar to the Lucas style mount used on some MG's. Flat base plate 95mm x 15mm with 75mm hole centres. Two 7mm rods connect the plate to the mirror head boss, overall bracket height 70mm. Lost wax cast in bronze, available in chrome or nickel plated finish.

Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with a special chrome mirror head domed nut. Very popular classic mirror arms. -- 70mm long stem

Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with a special chrome mirror head domed nut. Very popular classic mirror arms. -- 103mm long stem, pivot point in stem

Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with a special chrome mirror head domed nut. Very popular classic mirror arms. -- 110mm long stem

Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with a special chrome mirror head domed nut. Very popular classic mirror arms. -- 105mm long stem

Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with a special chrome mirror head domed nut. Very popular classic mirror arms.

Single point mounting stud for our oval part number CA1262 Raydyot type and 653 Desmo type mirrors, allowing them to be fitted in place with a SINGLE bolt/screw. This fitting replaces the standard two hole mounting bracket, and is ideal for use in limited spaces or where you don't want two holes. Dimensions 25mm long x 15mm diameter, 14.3mm diameter ball to fit the adjustable mirrror coupling on part number 653/CA1262 mirrors. 6mm hole through the centre to take the fixing type/length of your choice. Availalble in polished brass, nickel or chrome plated finish - please select from the options below. --

We offer an extended length mirror mounting bracket arm with approximately 25mm longer reach than standard, to enable our part number CA1262 Raydyot and 653 Desmo type mirrors to be positioned slightly further away from their mounting point. Base dimensions 58mm x 15mm, with holes centres 38mm apart. Flat back. Lost wax cast in bronze, polished and chrome plated.

Non-adjustable cranked rod mirror arm, available in chrome or nickel plated finish - please make your selection from the option box. Arm base dimensions 96mm x 21mm with two approx. 6mm diameter mounting holes with 75mm between centres. 7/16" (11mm) diameter rod approx. 150mm long. Offered for LEFT or RIGHT side fitting. Please note that style may vary from illustration. Lost wax cast bronze base with solid brass rod. -- right side fitting.

Non-adjustable cranked rod mirror arm, available in chrome or nickel plated finish - please make your selection from the option box. Arm base dimensions 96mm x 21mm with two approx. 6mm diameter mounting holes with 75mm between centres. 7/16" (11mm) diameter rod approx. 150mm long. Offered for LEFT or RIGHT side fitting. Please note that style may vary from illustration. Lost wax cast bronze base with solid brass rod. -- left side fitting

Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction, available in polished brass, chrome or nickel plated finish. Equivalent to the vintage Lucas type mirror arm fitting, commonly used with our part number 806S, 806 (equivalent to Lucas 140 type) and 806L (equivalent to Lucas 150 type) vintage mirrors. --

Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction, available in polished brass, chrome or nickel plated finish. Equivalent to the vintage Lucas type mirror arm fitting, commonly used with our part number 806S, 806 (equivalent to Lucas 140 type) and 806L (equivalent to Lucas 150 type) vintage mirrors. --

Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction, available in polished brass, chrome or nickel plated finish. Equivalent to the vintage Lucas type mirror arm fitting, commonly used with our part number 806S, 806 (equivalent to Lucas 140 type) and 806L (equivalent to Lucas 150 type) vintage mirrors. --

Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction, available in polished brass, chrome or nickel plated finish. Equivalent to the vintage Lucas type mirror arm fitting, commonly used with our part number 806S, 806 (equivalent to Lucas 140 type) and 806L (equivalent to Lucas 150 type) vintage mirrors.

Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long. Brass construction, available in polished brass, chrome or nickel plated finish. --

Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long. Brass construction, available in polished brass, chrome or nickel plated finish. --

Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long. Brass construction, available in polished brass, chrome or nickel plated finish. --

Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long. Brass construction, available in polished brass, chrome or nickel plated finish.

Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long. Brass construction, available in polished brass, chrome or nickel plated finish. --

Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long. Brass construction, available in polished brass, chrome or nickel plated finish. --

Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long. Brass construction, available in polished brass, chrome or nickel plated finish. --

Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long. Brass construction, available in polished brass, chrome or nickel plated finish.

Chrome plated non adjustable cranked right hand mirror arm, base 96mm x 21mm x two 6mm holes with 62mm centres. 7/16" (11mm) rod approx 150mm long. This arm is a one off special, made with 62mm mounting hole centres (only one available), our normal stock has 75mm hole centres.

Non-adjustable cranked rod mirror arm, available in chrome or nickel plated finish - please make your selection from the option box. Arm base dimensions 96mm x 21mm with two approx. 6mm diameter mounting holes with 75mm between centres. 7/16" (11mm) diameter rod approx. 150mm long. Offered for LEFT or RIGHT side fitting. Please note that style may vary from illustration. Lost wax cast bronze base with solid brass rod.

Triangular mirror mounting bracket, similar to the Lucas style mount used on some MG's. Flat base plate 95mm x 15mm with 75mm hole centres. Two 7mm rods connect the plate to the mirror head boss, overall bracket height 98mm. Lost wax cast in bronze, available in chrome or nickel plated finish, please select from the option box below.