Glass P100 DB headlamp lens with a 'Difusa' type (frosted finish) pattern around a CLEAR 'figure 8' shaped centre section. 4mm thick and 10 15/16" (277mm) in diameter, with locating notch in outer edge. 'Difusa' type pattern around the clear centre section created by acid etching as original.

Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern around a CLEAR centre section. 4mm thick and 11 1/4" (285mm) in diameter, with locating notch in outer edge. Difusa pattern around the clear centre created by acid etching as original.

Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern around a CLEAR centre section. 4mm thick and 10 15/16" (277mm) in diameter, with locating notch in outer edge. Difusa pattern around the clear centre created by acid etching as original.

Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern. 4mm thick and 11 1/4" (285mm) in diameter, with locating notch in outer edge.

Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern. 4mm thick and 10 15/16" (277mm) in diameter, with locating notch in outer edge.

Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 551093. 8 1/2" diameter. Suitable for Lucas type lamps L150, LBD150, MBD150 and MD150.

Original pattern frosted and ribbed lens with chrome on brass rim for our 1142S and 1142IND lamps, equivalent to the original Lucas 1142 type side lamp. Overall outside diameter 57mm, 18mm deep.

Replacement glass lens for original Lucas ST52 type lamps as well as our reproduction lamps - part numbers ST52B and ST52C. Equivalent to original Lucas number 523255. Lamp applications include Austin, Morris, Lea Francis and Morgan.

Red lens kit for Lucas L691/2 rear lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.

High quality plastic split RED/AMBER lens as used inour CA1149 part number lamps - split lens 'D' lamps (part numbers 249A and 428A), equivalent to the Lucas type ST51, converted to Stop, Tail, Number Plate light and Indicator functionality.

Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 551308. 7 13/16" diameter. Suitable for Lucas type lamps L140, L148, LD147, LD140, LBD140, LD141, LBD147, LDB140S, MD140, MBD148, LBD147/148, MBD143, LBD143/1 and LBD146G/P

Domed, pressed glass lens with 1/4" wide flutes in the lower half of the lens, below and around the clear centre and clear upper half. Equivalent to Lucas part number 504224. 7 3/4" diameter. Suitable for Lucas type lamps L140, L148, LD147, LD140, LBD140, LD141, LBD147, LDB140S, MD140, MBD148, LBD147/148, MBD143, LBD143/1 and LBD146G/P

Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number L215. 9 1/4" diameter. Hand finished edge. Suitable for Lucas type lamps L165, LD166, LBD163/1, LBD166, LBD163, LBP163S, LBD165S, LBD166S, LBD168, L163S, RD170S This flat glass lens fits best into rims with a return/lip on the front rim aperture - a 5mm diameter sponge cord (part number SRCf) then locates inside the lip and creates a seal when the lens is pressed down onto the lip by the headlamp wires (part number 642). 

Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number 505975. 8 9/16" diameter. Hand finished edge. Suitable for Lucas type lamps L150, LBD150, MBD150 and MD150. This flat glass lens fits best into rims with a return/lip on the front rim aperture - a 5mm diameter sponge cord (part number SRCf) then locates inside the lip and creates a seal when the lens is pressed down onto the lip by the headlamp wires (part number 642). 

Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number 516173. 7 13/16" diameter. Hand finished edge. Suitable for Lucas type lamps L140, L148, LD147, LD140, LBD140, LD141, LBD147, LDB140S, MD140 and MBD148. This flat glass lens fits best into rims with a return/lip on the front rim aperture - a 5mm diameter sponge cord (part number SRCf) then locates inside the lip and creates a seal when the lens is pressed down onto the lip by the headlamp wires (part number 642). 

Reproduction frosted plastic lens for Lucas LD109 type side lamps. Will fit original lamps as well as our 918-R, 918-RB and 918-T part numbered reproduction lamps.

High quality plastic split RED AMBER lens 82mm diameter as used in part number CA1249 lamps - equivalent to Lucas ST38 or 'Pork Pie' type rear lamps, converted to Stop, Tail, Number Plate Illumination and Indicator functionality.

Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if required.

Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if required. -- Clear lens

Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if required. -- Amber coated lens

Quality clear glass side lens for the number plate illumination cut out on 'Duolamp' type rear lamps - see part number series lamps CA1265, CA1266 and 211R.

Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available.

High quality plain red glass lens for part number series CA1266 'Duolamp' type stop and tail rear lamps with a plain (unequal waisted) lens.

High quality plain red glass lens for 958 and CA1265 part number series 'Duolamp' type lamps with a single (equal waisted) red lens.

Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require. -- Flat amber lens

Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require. -- Flat red lens

Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require.

Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic. -- Clear spare lens

Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic. -- Red spare lens

Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic. -- Amber spare lens

Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.

Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require. -- Domed amber lens

Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require. -- Domed red lens

Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require.

A high quality round backlight crystal glass lens with a very well defined faceted prismatic pattern. Manufactured in transparent deep red glass. 40mm in diameter x 8mm maximum thickness, with a flat - rather than concave - back. If this lens is used in 288/A (Lucas L582) type lamps, as an alternative to part number 288PR-L, then a small (19mm diameter) globe BA15D stop/tail bulb will be required e.g. B3214A or B3212A.

High quality round backlight crystal glass with faceted prismatic pattern. Manufactured in transparent deep amber glass. 40mm in diameter x 8mm maximum thick. With a flat (rather than concave) back -  if used in 288/A (Lucas L582) type lamps, as an alternative to part number 288PA-L, then a small (19mm diameter) globe BA15D (equal pin) base stop/tail bulb will be required e.g. B3212A or B3214A

Replacement acrylic red and white lens (equivalent to Lucas part number 523308) for the Lucas 288-3 rear number plate lamp/light box assembly. Dimensions 95mm wide x 67mm tall.

Replacement acrylic red lens (equivalent to Lucas part number 523307) for the Lucas 288-3 rear number plate lamp/light box  assembly. Dimensions 95mm wide x 67mm tall.

Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep amber glass, 57mm diameter with 2mm recess around the edge which is 3mm thick, total thickness 6mm. Smooth front face, rear has a multi faceted surface.

Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 57mm diameter with 2mm recess around the edge which is 3mm thick, total thickness 6mm. Smooth front face, rear has a multi faceted surface.

Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 54mm diameter with 1mm recess around the edge which is 2.2mm thick, total thickness 9.2mm. Smooth front face, rear has a multi faceted surface.

Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 40mm diameter with 1mm recess around the edge which is 2.1mm thick, total thickness 6.6mm. Smooth front face, rear has a multi faceted surface.

Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 52mm diameter with 1mm recess around the edge which is 2.8mm thick, total thickness 7.25mm. Smooth front face, rear has a multi faceted surface.

Very high quality backlight crystal glass round reflector lens, manufactured in transparent deep red glass, 85mm diameter with 2mm recess around the edge which is 3.6mm thick, total thickness 8mm. Smooth front face, rear has a multi faceted surface.

Original Lucas 'new old' stock plastic lens for L467 number plate lamps. 'E' and 'LUCAS 4103' marked.

Polished stainless steel backing cover for Lucas SF80 SE100 trafficator. overall length 195mm.

Orange plastic semaphore arm lens to fit the Lucas SF80 trafficator, part of the SE100 trafficator assembly. Equivalent to Lucas part number 532026. Overall length 180mm. 

Replacement clear plastic sleeve lens for the number plate illumination window in 288 part number series (equivalent to Lucas L582 type) lamps.

Amber glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lens. 40mm diameter lens with a concave back to allow fitment of a standard 25mm globe BA15D bulb.

Red glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lenses. 40mm diameter lens with a concave back to allow fitment of a standard BA15D stop/tail bulb with a 25mm globe.

Replacement large red plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.

Clear lens kit for Lucas L691/2 type side lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.

Amber lens kit for Lucas L691/2 indicator lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.

Spare clear side lens for part number series 776 and CA1249 (equivalent to Lucas ST38) 'Pork Pie' type rear lamps.

Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw. Available with vertical or horizontal flutes. -- Vertical flutes

Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw. Available with vertical or horizontal flutes. -- horizontal flutes

Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw. Available with vertical or horizontal flutes.

Replacement red split glass lens for ST51 type 'D' lamps, our part numbers 249A and 428A

Replacement red glass lens for plain ST51 type 'D' lamps, overall dimensions 67 tall x 78mm wide.

Rubber lens 'O' ring seal for Lucas type 1130 (297 series) sidelamps, with the glass lens with chrome surround and rim (part number 681).

Red and amber lens for Lucas L840 type rear lamps as used on MGs and Austin Healeys

Rubber lens 'O' ring seal for Lucas 1130 type sidelamps (297 series lamps) fitted with the plastic lens (part number 361).

Red glass lens for 299 part numbers eries lamps (equivalent to Lucas L594) type rear lamps

Amber glass lens for 299 part number series (equivalent to Lucas L594) type indicator lamps.

Clear glass lens for 299 part number series (equivalent to Lucas L594) type side lamps.

Red glass lens for Lucas L488 type rear lamps

Clear glass lens for 298 part number series (equivalent to Lucas L488) type side lamps

Amber glass lens for part number series 298 (equivalent to Lucas L488) type indicator lamps

Clear side lens for number plate window for Lucas type ST51 type 'D' Lamps - our part numbers 249, 249A, 428, 428A, CA1149B and CA1149C

Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available. --

All glass red lens for 211 part number series 'Duolamp' type rear lamps. Embossed with 'STOP' script on top section.

Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available. --

Original pattern opaque glass lens with chrome rim surround for our 297 (Lucas 1130) type side lamps, overall outside diameter 47mm. Fixed in position with retaining screw part number 865 - please order seperately if required.

Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 507163 or 504525. 9 1/8" diameter. Suitable for Lucas type lamps L166, LD165, LBD163/1, LBD166, LBD163, LBP163S, LBD165S, LBD166S, LBD168, L163S, RD170S