Andre Hartford shock absorber model 302M, powder coated, ready to fit. Two blades into three blades at friction end 4" (100mm) diameter, rolled edges, early type double star springs on the front with pressure disc plate on the rear, pressed rivet ends with rubber bush & inner tube. Illustration shows 302M with 9” equal arms as fitted on the front of Alvis 12/50, 12/60, Silver Eagle and SP20. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal leadtime before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Suitable for the medium size vehicle of approx 1500kg weight. Enamel finish, ready to fit. External round pressure bag fitted under Hydro dial with copper pipe connection fitted, one blade into two blades at friction end 4 1/2" (104mm) diameter. Minimum arm (blade) lengths 4 1/2", maximum length 10". Single arm ( blade) normally the longest on un-equal arm units.  Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.

Andre Hartford shock absorber model 302S, powder coated, ready to fit. One blade into two blades at friction end 4" (100mm) diameter, rolled edges, early type double star springs on the front with pressure disc plate on the rear, pressed rivet ends with rubber bush & inner tube. Please specify 5 to 8" arm length. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal leadtime before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Andre Hartford shock absorber model 298, powder coated, ready to fit. Two blade into three blades at friction end with four wooden discs 3-1/2" (89mm) diameter, rolled edges, early type star spring on the front with pressure disc plate on the rear, pressed rivet ends with rubber bush & inner tube. Please specify 5 to 10" arm length. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.

Andre Hartford shock absorber model 298, powder coated, ready to fit. One blade into two blades at friction end with two wooden discs 3-1/2" (89mm) diameter, rolled edges, early type star spring on the front with pressure disc plate on the rear, pressed rivet ends with rubber bush & inner tube. Specify 5" to 10" arm lengths. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.

Repusseau Hartford shock absorber model 101M, powder coated, ready to fit. Four blades into two blades with two dirt bands at friction end 4" (100mm) diameter, fitted with European cast eye end with offset bushes (offered in 40mm long or 42mm long). Please specify arm lengths between 5" and 10" arm lengths. Repusseau shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.

Andre Hartford shock absorber model 506M, matt aluminium finish, ready to fit. Two blades into three blades at friction end 4 1/2" (102mm) diameter. Later type star springs on front and rear, with rubber bush & inner tube. Illustration shows 506M with 7” equal arms, without brass disc's which are normally fitted. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges for unequal length arms in inches and half inches - please see drop down box. Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.

Andre Hartford shock absorber model 502M, matt aluminium finish, ready to fit. Two blades into three blades at friction end 3.1/2" (88mm) diameter. Later type star springs on front and rear, with rubber bush & inner tube. Illustration shows 502M with 6” equal arms. Please pecify 5" to 8" arm lengths. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Andre Hartford shock absorber model 306M, powder coated, ready to fit. Two blades into three blades at friction end 5" (125mm) diameter, rolled edges, early type double star springs on the front with pressure disc plate on the rear, one arm with pressed rivet end with rubber bush & inner tube, and tripe mounting plate 3 ½” (88mm) wide with 4 mounting holes 2 ½” (63mm) centres across, 1 3/8” (35mm) centres vertically. Mounting plates are an extension of the two outer and centre discs, the outer plates being folded over inwards . Illustration shows 306M with 6” single arm with mounting plates as fitted on the rear of MG K3, N and J4 range. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard arm length measured in full inches. An extra £9 additional charge applies for an arm length measured in 1/2 inches. For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/9 weeks. occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Andre Hartford shock absorber model 306M, powder coated, ready to fit. Two blades into three blades at friction end 5" (125mm) diameter, rolled edges, early type double star springs on the front with pressure disc plate on the rear, pressed rivet ends with rubber bush & inner tube. Illustration shows 306M with 6” equal arms as fitted on the front of MG K3, N and J4 range. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.50kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Andre Hartford shock absorber model 306S, powder coated, ready to fit. One blade into two blades at friction end 5" (125mm) diameter, rolled edges, early type double star springs on the front with pressure disc plate on the rear, one arm with pressed rivet end with rubber bush & inner tube, and single mounting plate 3-1/2" (88mm) wide with 4 mounting holes 2-1/2" (63mm) centres across, 1-3/8” (35mm) centres vertically. Mounting plate is an extension of the centre disc. Illustration shows 306S with 6” single arm with mounting plate as fitted on the rear of MG J & P range. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard arm length measured in full inches. An extra £9 additional charge applies for an arm length measured in 1/2 inches. For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Andre Hartford shock absorber model 306S, powder coated, ready to fit. One blade into two blades at friction end 5" (125mm) diameter, rolled edges, early type double star springs on the front with pressure disc plate on the rear, pressed rivet ends with rubber bush & inner tube. Illustration shows 306S with 6” equal arms as fitted on the front of MG J & P range. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering .

Suitable for the medium size vehicle of approx 2000kg or competition vehicles. Enamel finish, ready to fit. Two blades into three blades at friction end 4.1/2" (102mm) diameter, minimum arm (blade) length 4.1/2", maximum length 10". Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.

Suitable for the medium size vehicle of approx 1500kg weight. Enamel finish, ready to fit. One blade into two blades at friction end 4.1/2" (104mm) diameter, minimum arm (blade) lengths 4 1/2", maximum length 10". Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Suitable for smaller vehicles, up to approx 1000kg weight. Enamel finish, ready to fit. One blade into two blades at friction end 3.1/2" (89mm) diameter, minimum arm (blade) length 4.1/2", maximum length 9". Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown on the website is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 1.5kg per unit before any packaging weight.  Normal delay before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Suitable for the medium size vehicles of approx 1500kg or competition vehicles. Enamel finish, ready to fit. Two blades into three blades at friction end 3.1/2" (89mm) diameter, minimum arm (blade) length 4 1/2", maximum length 9". Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown on the website is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Andre Hartford shock absorber model 306M, powder coated, ready to fit. Two blades into three blades at friction end 5" (125mm) diameter, rolled edges with centre shroud which protects friction material, early type double star springs on the front with pressure disc plate on the rear, pressed rivet ends with pinch bolt holding the rubber bush & inner tube. Illustration shows 306M with 10” equal arms as fitted to Bentley. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.50kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering

Suitable for the medium size vehicles of approx 2000kg or competition vehicles. Enamel finish, ready to fit. to fit. External round pressure bag fitted under Hydro dial with copper pipe connection fitted, two blades into three blades at friction end 4 1/2" (102mm) diameter Minimum arm (blade) length 4.1/2", maximum length 10". Two blade arm normally the longest on un-equal arm units. Andre Hartford shock absorbers are made to specific order against specified arm lengths requested. Please note that the price shown is for standard equal length arm units only. Additional charges apply for unequal length arms and 1/2" measurements: Arm lengths measured in half inches, both same lengths - £9 extraArm lengths measured in full inches, but different lengths - £9 extraArm lengths measured in 1/2 inches and different lengths - £18.00 extra For post and packaging calculations allow a weight of approx 2.10kg per unit before any packaging weight. Normal lead time before despatch is about 6/8 weeks. Occasionally we do have some units already assembled and ready on the shelf - contact us prior to ordering.