Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed.

Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres) non locking or locking, 

Torpedo handle. Approx 85mm long x 20mm wide at widest point supplied with escutcheon with 34mm hole centres (as with handle 599). Cast brass finish and will require some final finishing.

Chromium plated (alternative nickel plate finish also offered) early pattern door handle, 98mm long, escutcheon fixing holes at 36mm centres. --

Chromium plated (alternative nickel plate finish also offered) early pattern door handle, 98mm long, escutcheon fixing holes at 36mm centres. --

Vintage style curved shaped handle with slight raised rib, similar to the handle fitted to the Austin Chummy. Approx 80mm long x 20mm wide with 8mm square shaft fitted 90mm long, Supplied in cast brass finish and will require some final finishing.

Fine vintage style curved handle. Approx. 98mm long x 20mm wide supplied with escutcheon with 34mm hole centres, supplied in cast brass finish and will require final polishing

Loop carriage handle. Approximately 90mm wide, supplied rough cast brass only, will require final finishing/polishing by customer.

Chromium finish, typical post war curved pattern 132mm. Offered with large and small mounting escutcheons, hole centres as indicated of 38mm or 44mm. -- note shaft is only 50mm long on this handle

Torpedo shaped chrome plated exterior door handles with slightly depressed black finish centre area and squared off ends, approx 93mm long x 22mm wide. Mounting escutcheon 53mm x 23mm with hole centres approx 36mm centres. Shaft length is 75mm long. Non locking. Supplied as a PAIR.

Chrome plated 'T' handle for boot/trunk. Locking

Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres) non locking or locking,  -- shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. offered locking or non locking. we offer this handle with a flat base escutcheon (35mm hole centres) non lock or locking.

Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres) non locking or locking,  -- shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. offered locking or non locking. we offer this handle with a flat base escutcheon (35mm hole centres) non lock or locking 

Fluted pattern 115mm long, chrome finish, escutcheon hole centres approx 34mm.

Fluted pattern 115mm long, chrome finish, escutcheon hole centres approx 34mm, locking.

Chromium finish, typical post war curved pattern 132mm. Offered with large and small mounting escutcheons, hole centres as indicated of 38mm or 44mm. --

Chromium finish, typical post war curved pattern 132mm. Offered with large and small mounting escutcheons, hole centres as indicated of 38mm or 44mm.

Chromium finish, typical post war curved pattern 132mm. Offered with large and small mounting escutcheons, hole centres as indicated of 38mm or 44mm. -- shaft length on this handle is only 50mm

Chromium finish, typical post war curved pattern 132mm. Offered with large and small mounting escutcheons, hole centres as indicated of 38mm or 44mm. --

Chrome plated handle 89mm long with oval escutcheon 23mm x 18mm. Short 5/16" (8mm) square shaft. Also fits Ford Dexta Major.

Plain pattern, non-locking,125mm long, chrome finish, escutcheon hole centres approx 34mm.

Plain pattern 125mm long, chrome finish, escutcheon hole centres approx 34mm, locking

Concave groove, slightly curved traditional pattern handle, 95mm long. Escutcheon hole centres approx 38mm. chromium plate finish. Commonly used on Austin 7 and Morgan.

Concave groove, slightly curved traditional pattern handle, 95mm long. Escutcheon hole centres approx 38mm. chromium plate finish. Commonly used on Austin 7 and Morgan. --

Concave groove, slightly curved traditional pattern handle, 95mm long. Escutcheon hole centres approx 38mm. chromium plate finish. Commonly used on Austin 7 and Morgan. --

Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed. --

Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed. --

Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed. --

Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed. --

Chrome plated T locking door handle, 99mm long fitted with mounting escutcheon with 35mm hole centres. Particularly suited to van rear doors. Shaft will require cutting to suit application.

Locking chrome plated swept type door handle, supplied in PAIRS only to suit left and right of vehicle. Escutcheon hole centres 36mm, Matched key sets.

Chromium plated swept type door handle, supplied singly to suit left and right of vehicle.

Chromium plated swept type door handle, supplied singly to suit left and right of vehicle. --

Chromium plated swept type door handle, supplied singly to suit left and right of vehicle. --

Nicely shaped exterior door handle with slightly hollowed centre area, chromium finish, approx 100mm long. Mounting ecsutcheon hole centres approx 36mm centres. Shaft length is only 40mm long but can easily be extended if necessary by welding extra square steel on.

Nicely shaped exterior door handle with slightly hollowed centre area, chromium finish, approx 100mm long. Mounting ecsutcheon hole centres approx 36mm centres. Shaft length is only 40mm long but can easily be extended if necessary by welding extra square steel on. --

Nicely shaped exterior door handle with slightly hollowed centre area, chromium finish, approx 100mm long. Mounting ecsutcheon hole centres approx 36mm centres. Shaft length is only 40mm long but can easily be extended if necessary by welding extra square steel on. --

Small handle, as used on Cobra etc. 74mm long escutcheon hole centres 35mm chrome finish.

Small handle, as used on Cobra etc. 74mm long escutcheon hole centres 35mm chrome finish. --

Small handle, as used on Cobra etc. 74mm long escutcheon hole centres 35mm chrome finish. --

Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long.

Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long. --

Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long. --

Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long. --

Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long. --

Chromium finish handle 132mm long. Fitted with special heart-shaped escutcheon, with mounting holes at 36mm centres. As fitted to MGTF, Morris Series E etc.

Chromium finish handle 132mm long. Fitted with special heart-shaped escutcheon, with mounting holes at 36mm centres. As fitted to MGTF, Morris Series E etc. -- Please note, the shaft is only 60mm long on this handle

Chromium finish handle 132mm long. Fitted with special heart-shaped escutcheon, with mounting holes at 36mm centres. As fitted to MGTF, Morris Series E etc. --

Chromium plated (alternative nickel plate finish also offered) early pattern door handle, 98mm long, escutcheon fixing holes at 36mm centres.

Chromium plated (alternative nickel plate finish also offered) early pattern door handle, 98mm long, escutcheon fixing holes at 36mm centres. --

Chromium plated (alternative nickel plate finish also offered) early pattern door handle, 98mm long, escutcheon fixing holes at 36mm centres. --

Chromium plated plain shaped door handle 105mm long. Offered with large and small mounting escutcheons, hole centres as indicated.

Chromium plated plain shaped door handle 105mm long. Offered with large and small mounting escutcheons, hole centres as indicated. --

Chromium plated plain shaped door handle 105mm long. Offered with large and small mounting escutcheons, hole centres as indicated. --

Chromium plated plain shaped door handle 105mm long. Offered with large and small mounting escutcheons, hole centres as indicated. --

Chromium plated plain shaped door handle 105mm long. Offered with large and small mounting escutcheons, hole centres as indicated. --

Plain T boot handle approx 108mm, escutcheon hole centres 36mm, chrome plated. Available locking only. 8mm square shaft