Toby 'diver's helmet' small tail lamp. 48mm diameter mains glass bulls eye lens, 42mm diameter glass bulls eye side lenses. Overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs. Fitted with riveted Toby medallion. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. These superb lamps are available in polished brass, chrome and nickel, with double contact bulbholder and plug in base. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with three amber lens for indicator use. Please specify your requirement. Requires equal pin BA15D bulbs - for spare bulbs please see our B383 (6v) or B381 (12v) for stop and tail version, B318 (6v) or B335 (12v) for indicators.

Toby 'diver's helmet' rear lamp. With three 52mm diameter glass, bulls eye lenses. Overall lamp diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs. Fitted with riveted 'Toby' medallion. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. These superb lamps are available in polished brass, chrome and nickel, with double contact bulbholder and plug in base. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with three amber lens for indicator use. Please specify your requirement. Requires equal pin BA15D bulbs - for spare bulbs please see our B383 (6v) or B381 (12v) for stop and tail version, B318 (6v) or B335 (12v) for indicators.

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with: Red flat main lens, one red side lens and one clear side lens for stop, tail and number plate illumination use. Amber lenses all round for indicator use. SBC BA15D double contact bulbholder fitted, enabling use of double filament bulbs. For bulbs, please see our B383 (6v) or B381 (12v) for stop, tail and number plate illumination and B318 (6v) or B335 (12v) for indicator use. --

Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with: Red flat main lens, one red side lens and one clear side lens for stop, tail and number plate illumination use. Amber lenses all round for indicator use. SBC BA15D double contact bulbholder fitted, enabling use of double filament bulbs. For bulbs, please see our B383 (6v) or B381 (12v) for stop, tail and number plate illumination and B318 (6v) or B335 (12v) for indicator use. --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --