High quality CSP 1860 LED upgrade for Marchal type bulbs with a double contact BA21D bulb base. With integral heatsink. Accepts 5 to 9V input voltage - optimised for 6V, positive and negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B5912 (45/40W) with a classic warm white light. The LED layout is designed to match the original Marchal filament layout including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic white colour temperature. This bulb is a great LED alternative to a number of 6V bulbs including B5911B and B5912B. Made from aviation grade aluminium. These bulbs don't have an integral lens. Please see part numbers BA21DLED-H25YL and BA21DLED-H30L for LED upgrade lamps with integral lenses suitable for 6V systems. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

Stella Lux H4 LED conversion is a great LED lighting option for classic car owners. Suitable for classic cars fitted with 7" Lucas type headlamps with applications including, MG, Mini, Morris, Triumph, Ford, Jaguar, Land Rover, Austin Healey, Aston Martin and Morgan. These lamps deliver improved road presence and visibility for an enhanced driving experience whatever the conditions. High performance LEDs, significantly brighter than standard 60/55W H4 halogen bulbs in testing, emitting a 5000k neutral white colour. A good option between our 4300k classic white and 6300k bright white LEDs.Utilising latest HGL3 5530 LEDs from Lattice Power with enhanced light density. Designed to fit Lucas 7" type headlamps with H4 bulbs, the popular Stella Lux LED conversion features premium quality light units with a 30,000+ hour lifespan and is compliant with current UK MOT testing requirements on vehicles first used before 1st April 1986. Backed with an extended warranty and supplied complete with instructions for straightforward installation. NB this H4 lighting upgrade is compatible only with H4 7" headlamps. Not suitable for vehicles fitted with sealed beam headlights, where the light source cannot be replaced. ALSO NOT SUITALE FOR FREE STANDING HEADLAMPS - where there is insufficient space to accomodate the rear mounted fan and driver assembly. Ultra long life fan and voltage driver (ensuring consistent performance) with remote H4 connector on a flying lead. Quality aluminium LED surround including dip beam filament shield. Low load - 2.6A at 12V. Total LED length 86mm - please note, fan assembly protrudes 38mm behind the LED base plate locating lugs. Driver 17mm x 30mm x 56mm + cable entry protectors. Please ensure your lamp housing can accomodate these LEDs. A high quality conversion kit. We offer a range of leading H4 conversions for classic and vintage vehicle owners wishing to take advantage of the latest advances in LED technology - please see alternative lamps including many of equivalent size to a standard H4 bulb that require no additional installation space.

High quality LED upgrade (with heatsink) for H4 lamps with the P43T base. Set of two H4 bulbs.  Flexible application - accepts 10 to 30V input voltage so suitable for 12 or 24V vehicles. Two very high power LEDs on each side provide high and low beam function - specified at over 2000 Lumen high beam and 2000 Lumen low beam giving over 4000 Lumen combined. In testing, 90% brighter on low beam and 70% brighter on high beam than  B472 (60/55W) with a bright, white light. Our highest performance H4 upgrade LED without a cooling fan - a bright white version of our best selling classic white H4 LED. Very low current draw - less than 40% of 60/55w halogen bulbs, so great for low powered electrical systems (less than 2A at 12V). 6300K bright, white colour temperature. Plug and play upgrade for H4 bulbs - powerful, high performance lighting with reduced current consumption. Estimated lifespan significantly higher than conventional bulbs. The filament layout including low beam filament shield produces a good high and low beam pattern - with a clean cut off and dip patten observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a great LED upgrade alternative to a number of halogen bulbs including B472. Premium construction from aviation grade aluminium. Cooled by a solid heatsink - no fan, so no moving parts. These bulbs don't have an integral lens so can be used in tripod type lamps. Total bulb height including wiring/spade connections 80mm.

High quality 12 x Cree LED upgrade for SBC BA15D head and spot lamp bulbs from the '20s to the '50s. This is a SINGLE BRIGHTNESS LED lamp with a double contact base - one live contact and one earth contact on the base. This is an alternative to single brightness LED head and spot lamps with the BA15S single contact cap - that have a single (live) contact on the base and earth back through the cap. Flexible application - suitable for 6 or 12V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to Transverse filament. 1200 Lumen bright white beam with a soft beam pattern. Brighter than 12V incandescent bulb B26 (60W) in testing. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of brighter 6, 12 and 24V BA15D SINGLE FILAMENT head and spot lamp bulbs including 6V - B78, B111 and 12V - B5/B33, B27B, B26. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 65mm total height, 11 x 25mm LED section, 15mm diameter cap.

High performance CSP 1860 LED upgrade for British Pre-focus headlamp bulbs with the P36D base. Integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative OR positive earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B370 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. Not ideal for Tripod headlamps, in which instance use P36DLED-S30 for suitable beam pattern for Tripod Headlamps  This bulb is a great LED alternative to a number of 12 and 24V british Pre-focus bulbs with dipped beam filament shields including B370, B414B and B437. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number P36DLED-P43-6 for a 6V, negative or positive earth version. Please see part numbers P36DLED-S30 and P36DLED-S43 for British Pre-focus headlamp bulbs with twin transverse filaments without filament shields. And P36DLED-H30L and P36D0LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

High performance CSP 1860 LED upgrade for SBC headlamp bulbs with the BA15D base. Integral aluminium heatsink. Accepts 5 to 9V input voltage - optimised for 6V, negative OR positive earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B170 (36/36W). The LED layout and inclusion of a low beam filament shield on this lamp means makes this a dipping bulb in the syle of some Marchal, Bosch and later British Pre-focus bulbs. Some early BA15D bulb designs did have special dipping filament arrangements - either a transverse 'V' filament next to an axial 'V' filament, or a hemispherical shield under the dipped beam filament - though these bulbs have not been available for many years. In testing, this LED lamp produced a great high and low beam pattern with Lucas 'U' flute style lenses in particular and is the recommended BA15D 'no integral lens' LED lamp upgrade for early headlamps fitted with these lenses, with or without a Bi-flex bar. For 'Difusa' style lenses, we recommend the BA15DLED-H30-6N or 6P style LED, which imitates a twin (unshielded) filament bulb, or BA15DLED-H43L with the integral lens that produces great light output - regardless of reflector condition - and an excellent, defined dipping pattern Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 6V BA15D bulbs including B170B (6V 36/36W) and B624 (24/24W). Body made from aviation grade aluminium. As noted above, these bulbs don't have an integral lens, so can be used in tripod type lamps. 60mm total bulb height. 25mm max heat sink diameter, 15mm cap diameter.

High quality LED upgrade with aluminium heatsink for H3 lamps with the PK22S base. D9 (S) series lamp with two 5530 LEDs rated at 16W, 1400 Lumen combined. Replaces a standard H3 bulb in the same size envelope. Flexible application - 12V and 24V input. NEGATIVE EARTH ONLY! One high power LED on each side of the lamp body. In testing, these lamps proved brighter than 12V B453 (55W) and 12V B483 (100W) when installed in a lamp, with a bright white look. Very low current draw - less than 40% of 55w halogen bulbs, so great for low powered electrical systems. 6500K bright white colour temperature. Plug and play upgrade for H3 bulbs. Powerful, high performance lighting with reduced current consumption in a compact package. This high performance LED is a great upgrade alternative to a number of halogen bulbs including B453, B483 and B460. Premium construction from aviation grade aluminium. Total LED height 41mm. One 6.3mm spade connection on a 100mm long tail. A great LED upgrade for 978 style Fog, Reversing and Indicator lamps.

High quality LED upgrade with aluminium heatsink for H1 lamps with the P14.5S base. D9 (S) series lamp with two 5530 LEDs rated at 16W, 1200 Lumen combined. Replaces a standard H1 bulb in the same size envelope. Flexible application - 12V and 24V input. NEGATIVE EARTH ONLY!  One high power LED on each side of the lamp body. In testing, these lamps proved a bright yellow light when installed in a 5 3/4" spot lamp fo fog lamp applications. Very low current draw - less than 40% of 55w halogen bulbs, so great for low powered electrical systems. 2500K yellow colour temperature. Plug and play upgrade for H1 bulbs - with a lower space requirement than H1LED-PP30. Powerful, high performance lighting with reduced current consumption in a compact package. Premium construction from aviation grade aluminium. Total LED height 60mm. One 6.3mm spade connection. These lamps can be used with the H1UPGRADE kit to replace British Pre-focus bulbs in some spot lamp .

High quality 16 x Cree 2525 (with heatsink) LED upgrade for Marchal type head and spot bulbs with a SINGLE contact BA21S bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Two rows of transverse LEDs each side, to recreate the transverse filament arrangement of original bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright white colour temperature. This bulb is a great LED upgrade alternative to a number of 6 and 12V single filament bulbs including B5812B and B1292B. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers BA21LED-H25YTR and BA21LED-H30TR for Yellow and warm White versions of this lamp. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for Marchal type head and spot bulbs with a SINGLE contact BA21S bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Two rows of transverse LEDs each side, to recreate the transverse filament arrangement of original bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm white colour temperature. This bulb is a great LED upgrade alternative to a number of 6 and 12V single filament bulbs including B5812B. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers BA21LED-H25YTR and BA21LED-H43TR for Yellow and bright White versions of this lamp. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High quality 16 x transverse Cree 2525 (with heatsink) LED upgrade for SINGLE CONTACT American Pre-focus head and spot lamp bulbs from the '30s and '40s with the P15S 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 6000K bright, white colour temperature. This bulb is a great LED upgrade alternative to single contact APF incandescent bulbs - 6V, 36W part number BA5679 and 12V, 42W part number BA5678. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm SINGLE contact base with 30mm diameter pre-focus plate. For a softer, warm white version of this bulb please see part number APFLED-S30TR.

Warm white, High quality 16 x transverse Cree 2525 (with heatsink) LED upgrade for Bosch and Lucas head and spot lamp bulbs from the '30s to the '50s with the BA20S (single contact) base. Flexible application - suitable for 6, 12 and 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V single filament bulbs from 35W to 50W including 6V B130, 12V B421, B96 & B96T and 24V B398. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 72mm total bulb height, 12 x 25mm LED section. 20mm diameter cap. For a brighter white version of this LED lamp please see part number BA20SLED-S43TR

Bright white, High quality 16 x transverse Cree 2525 (with heatsink) LED upgrade for Bosch and Lucas head and spot lamp bulbs from the '30s to the '50s with the BA20S (single contact) base. Flexible application - suitable for 6, 12 and 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 6000K bright, white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V single filament bulbs from 35W to 50W including 6V B130, 12V B421, B96 & B96T and 24V B398. Made from aviation grade aluminium.These bulbs don't have an integral lens so can be used in tripod type lamps. 72mm total bulb height, 12 x 25mm LED section. 20mm diameter cap. For a softer, warm white version of this LED lamp please see part number BA20SLED-S30TR

Bright white, high-quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to transverse filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than 12v incandescent bulb B323B (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs including B606 and B323. Made from aviation-grade aluminium. These bulbs don't have an integral lens so can be used in tripod-type lamps. 60mm total bulb length, LED section 12mm x 25mm, P36S base with 22mm diameter cap and 36mm diameter plate

High quality 8 x Cree 2525 (with heatsink) LED solution for lower wattage British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Vertical LED arrangement equivalent to axial filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than transverse pattern P36S LED lamps and brighter than 12v incandescent bulb B185 (48W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6, 12 and 24V bulbs including B185 and B162. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 62mm total bulb length, 12 x 25mm LED section, 22mm diameter single contact cap with 36mm diameter pre-focus plate. 62mm total bulb length, 12 x 25mm LED section, 22mm diameter single contact cap with 36mm diameter pre-focus plate.

Warm white, high-quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to transverse filament. 1200 Lumen beam with a soft beam pattern. In testing, comparable in brightness to 12v incandescent bulb B323B (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs including B606 and B323. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 61mm total bulb length with 12 x 25mm LED section. 22mm diameter cap with 36mm plate.

High quality 8 x Cree 2525 (with heatsink) LED option for lower wattage British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Vertical LED arrangement equivalent to axial filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than transverse pattern P36S LED lamps and brighter than 12v incandescent bulb B185 (48W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6, 12 and 24V bulbs including B185 and B162. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 62mm total bulb length, 12 x 25mm LED section, 22mm diameter single contact cap with 36mm diameter pre-focus plate.

6 VOLT POSITIVE EARTH APPLICATION. High-quality 16 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Horizontal LED arrangement equivalent to a transverse filament. 1200 Lumen beam with a soft beam pattern. In testing, comparable to 6V incandescent bulb B108 (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6V bulbs including B108. Made from aviation-grade aluminium. These bulbs don't have an integral lens so can be used in tripod-type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm diameter cap.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to Transverse filament. 1200 Lumen bright white beam with a soft beam pattern. Brighter than 12V incandescent bulb B23B (45W) in testing. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K classic, white colour temperature. This bulb is a great LED upgrade alternative to a number of brighter 12 and 24V head and spot lamp bulbs including B23B and B795. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. See part number BA15SLED-S30TR for a 3000k warmer white colour temperature. 65mm total bulb height, 12 x 25mm LED section, 15mm diameter cap.

Bright white High quality 8 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Flexible application - suitable 12v or 24V vehicles and compatible with either negative or positive earth systems. Vertical LED arrangement is equivalent to axial filament. 1200 Lumen bright white beam with a soft beam pattern. Brighter than 12V incandescent bulb B23A (48W) in testing. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of brighter 12v and 24V head and spot lamp bulbs including B23A. Made from aviation-grade aluminium. These bulbs don't have an integral lens so they can be used in tripod-type lamps.

High quality 8 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. 6 VOLT POSITIVE EARTH APPLICATION. Vertical LED arrangement equivalent to axial filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than 6v incandescent bulb B108 (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6 bulbs including B106. Made from aviation grade aluminium.These bulbs don't have an integral lens so can be used in tripod type lamps.

Warm white High quality 8 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. Vertical LED arrangement is equivalent to the axial filament. 1200 Lumen warm white beam with a soft beam pattern. Brighter than 12V incandescent bulb B2A (36W) in testing. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs from 24 to 36W including B1 and B2B. Made from aviation-grade aluminium. These bulbs don't have an integral lens so they can be used in tripod-type lamps. Please see part numbers BA15SLED-S30AX-6P and BA15SLED-S30AX-6N for 6V positive and negative earth applications. See BA15SLED-S43AX for a brighter white alternative upgrade option for higher-wattage BA15S single axial filament bulbs.

High performance CSP 1860 LED upgrade for British Pre-focus headlamp bulbs with the P36D base. Integral heatsink. Accepts 5 to 9V input voltage - optimised for 6V, negative OR positive earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B306 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. Not suitable for Tripod lamps, use P36DLED-S30 for correct beam pattern for Tripod Lamps. This bulb is a great LED alternative to a number of 6V british Pre-focus bulbs with dipped beam filament shields including B306 and B312B. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number P36DLED-P43 for a 12V, negative or positive earth version. Please see part numbers P36DLED-S30-6P and P36DLED-S30-6N for 6V British Pre-focus headlamp bulbs with twin transverse filaments without filament shields. And P36DLED-H30L and P36D0LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

High quality LED upgrade (with heatsink) for H4 lamps with the P43T base. Set of two H4 bulbs.  Flexible application - accepts 10 to 30V input voltage so suitable for 12 or 24V vehicles. Two high power LEDs on each side provide high and low beam function - specified at over 1500 Lumen high beam and 1500 Lumen low beam giving over 3000 Lumen combined. In testing, 60% brighter on low beam and 40% brighter on high beam than  B472 (60/55W) but with a classic warm, white light. Very low current draw - less than 40% of 60/55w halogen bulbs, so great for low powered electrical systems (less than 2A at 12V). 4300K warm, white colour temperature. Plug and play upgrade for H4 bulbs - powerful, high performance lighting with reduced current consumption. Estimated lifespan significantly higher than conventional bulbs. The filament layout including low beam filament shield produces a good high and low beam pattern - with a clean cut off and dip patten observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a great LED upgrade alternative to a number of halogen bulbs including B472. Premium construction from aviation grade aluminium. Cooled by a solid heatsink - no fan, so no moving parts. These bulbs don't have an integral lens so can be used in tripod type lamps. Total bulb height including wiring/spade connections 80mm.

Premium high power LED lens lamp upgrade for H4 headlamp bulbs with the P45T base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). 4300K bright white colour temperature. This bulb is a great LED alternative to a Halogen P45T 6, 12 and 24V H4 bulbs, with brightness in testing comparable with halogen 45/40. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 81mm these are shorter than standard P45t H4 headlamp type bulbs at 92mm.

Premium high power LED lens lamp upgrade for H4 headlamp bulbs with the standard P43T base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). 4300K bright white colour temperature. This bulb is a good LED upgrade alternative to a large number of 6, 12 and 24V H4 bulbs, in testing comparable in brightness to halogen 35/35W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a total bulb length of 81mm these are shorter than standard H4 headlamp type bulbs (at 92mm).

Premium high power LED lens lamp upgrade for Marchal type lamps with a double contact BA21D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - an equally bright yellow version is available with a colour temperature of 2500K - see part number BA21LED-H25YL. This bulb is a great LED upgrade alternative to B5912B and B5915B. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. The lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are gerat for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 71mm these are longer than standard BA21 Marchal type bulbs at 60mm.

Premium high power LED lens lamp upgrade for Marchal type bulbs with a double contact BA21D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 2500K yellow colour temperature - a white version is available with a warm classic colour temperature of 3000K - see part number BA21LED-H30L. This bulb is a great LED upgrade alternative to B5912BY and B5915BY. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. The lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 71mm these are longer than standard BA21 Marchal type bulbs at 60mm.

Bright white premium high power LED lens lamp upgrade for Bosch type lamps with a double contact BA20D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 4300K modern, bright white colour temperature - a version is available with a warmer, classic colour temperature of 3000K - see part number BA20LED-H30L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA20D bulbs from 25/25W to 45/40. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note that due to the lens on the LED, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 75mm these are slightly longer than standard BA20 Bosch type bulbs (at 71mm).

Warm white premium high power LED lens lamp upgrade for Bosch type lamps with a double contact BA20D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - a version with a brighter/whiter colour temperature of 4300K is also available - see part number BA20LED-H43L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA20D bulbs from 25/25W to 45/40. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 75mm these are slightly longer than standard BA20 Bosch type bulbs (at 71mm).

Warm white premium high power LED lens lamp upgrade for British Pre-Focus headlamps with a double contact P36D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - a version is available with a brighter/whiter colour temperature of 4300K - see part number P36DLED-H43L. This bulb is a great LED upgrade alternative to bulb types B312B, B414B, B437, B370, B354, B358, B350, B306 and B359. In testing, this bulb was comparable to 6V incandescent bulb B312B and 12V incandescent bulb B301 (36/36W). These bulbs include a lens that is designed to focus their own beam and produce a super light output with bright main beam and well defined level dipped beam with the dip pattern set by the light unit lens. The integral lens makes reflector condition less important. Please note though, that due to the integral lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 67mm these are shorter than most sizes of incandescent BPF bulbs (at 80mm).

Bright white Premium high power LED lens lamp to upgrade for British Pre-Focus headlamps with a double contact P36D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 4300K modern, bright white colour temperature - a lower colour temperature version is available with a warmer, classic colour of 3000K - see part number P36DLED-H30L. This bulb is a great LED upgrade alternative to bulb types B312B, B414B, B437, B370, B354, B358, B350, B306 and B359. In testing, this was brighter than 6V incandescent bulb B312B (24/30W) and was comparable with 12V incandescent bulb B354 (36/42W). These bulbs include a lens that is designed to focus their own beam and produce a super light output with a bright main beam and well-defined level dipped beam, with the dip pattern set by the light unit lens. This lens makes reflector condition less important. Please note though, that due to the integral lens, this bulb cannot be used with tripod-type lamps or those with an internal 'Biflex' style reflector, as they disrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low-powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 67mm, these are shorter than most types of incandescent BPF bulbs (at 80mm).

High quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36D base. 6 VOLT POSITIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs such as B6721 type bulbs. In testing, brighter than incandescent bulbs rated at 24/30W, more comparable with 36/42W. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. Suitable beam pattern for Tripod headlamps. This bulb is a good LED upgrade alternative for unshielded twin filament 6V bulbs including B6721. It is not a suitable alternative to B306 and B312B as they have shielded filaments - the LED upgrade option for these bulbs is P36DLED-P43-6. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 59mm total bulb height. 12 x 25mm LED section. P36D cap 22mm diameter with 36mm diameter plate.

Bright white Premium high power LED lens lamp upgrade for SBC BA15D type headlamp bulbs. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 4300K modern, bright white colour temperature - a version is available with a warmer, classic colour temperature of 3000K - see part number BA15LED-H30L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA15D bulbs from 24/24W to 45/35W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes lamp reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Bi-flex' style reflector, as they distrupt the carefully designed beam pattern. In testing these lamps were brighter than incandescent bulb B170B (6V) 36/36W and B1248B (12V) 45/35W. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 64mm these are slightly longer than standard BA15D headlamp 38mm diameter globe type bulbs (at 60mm total height).

Classic warm white Premium high power LED lens lamp upgrade for SBC BA15D type headlamp bulbs. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - a version with a brighter/whiter colour temperature of 4300K is also available - see part number BA15LED-H43L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA15D bulbs from 24/24W to 45/35W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This integral lens makes lamp reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Bi-flex' style reflector, as they disrupt the carefully designed beam pattern. In testing these lamps were brighter than incandescent bulbs B170B (6V) and B171B (12V) 36/36W. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 64mm these are slightly longer than standard BA15D headlamp 38mm diameter globe type bulbs (at 60mm total height).

High quality 16 x Cree 2525 (with heatsink) LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. 6 VOLT NEGATIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to 6V bulbs B168 (24/24W) and B170B (36/36W). In testing, these lamps were significantly brighter than incandescent bulb B170B 36/36W, with over 50% more light output. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod or Bi-flex type lamps. Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap. If your lamps doesn't have a biflex bar or tripod arrangement, please consider part number BA15DLED-H30L and BA15DLED-H43L, which are also great with tired reflectors, as the integral lens on these LEDs focusses its own beam.

High-quality 16 x Cree 2525 (with heatsink) WARM WHITE LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern.  One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K classic, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs from 24/24 to 45/35W including B171B, B1248B and B194. In testing, it proved significantly brighter than B1248B at 45/35W. Made from aviation-grade aluminium. These bulbs don't have an integral lens so can be used in tripod-type lamps. Please see part number BA15DLED-H43 for a 4300k, bright white colour. Also part numbers BA15DLED-H30-6P and BA15DLED-H30-6N for 6V positive and negative earth applications respectively.  Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. 6 VOLT POSITIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to 6V bulbs B168 (24/24W) and B170B (36/36W). In testing, these lamps were significantly brighter than incandescent bulb B170B 36/36W, with over 50% more light output. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod or Bi-flex type lamps. Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap. If your lamps doesn't have a biflex bar or tripod arrangement, please consider part number BA15DLED-H30L and BA15DLED-H43L, which are also great with tired reflectors, as the integral lens on these LEDs focusses its own beam.

High-quality LED upgrade (with built-in mini cooling fan) for H4 lamps with the P43T base. Single H4 bulb.  Flexible application - accepts 9 to 32V input voltage. Two high-power LEDs on each side provide high and low beam function - specified at over 1800 Lumen high beam and 1800 Lumen low beam, giving over 3600 Lumen combined. In testing, 90% brighter (LUX measurement at a fixed distance) on low beam and over 100% brighter on high beam than B472 (60/55W) with a modern, bright white look. Low current draw - less than 50% of 60/55w halogen bulbs, so great for lower-powered electrical systems. 6000K clean bright, white colour temperature. The latest plug-and-play upgrade for H4 bulbs - modern, powerful, high-performance lighting with reduced current consumption; Estimated lifespan significantly higher than conventional bulbs. The filament layout, including low beam filament shield, produces a good high and low beam pattern - with a clean cut-off and dip pattern observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a very powerful LED upgrade alternative for a number of halogen bulbs including B472. These bulbs don't have an integral lens so can be used in tripod-type lamps. Total bulb height including wiring/spade connections 80mm, 19 x 42mm LED section. Due to the high-performance nature of the bulb, cooling cannot be achieved with a solid, no moving parts heatsink, hence the incorporation of a cooling fan.

High performance CSP 1860 LED upgrade for SBC headlamp bulbs with the BA15D base. Integral aluminium heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative OR positive earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B171 (36/36W). The LED layout and inclusion of a low beam filament shield on this lamp means makes this a dipping bulb in the syle of some Marchal, Bosch and later British Pre-focus bulbs. Some early BA15D bulb designs did have special dipping filament arrangements - either a transverse 'V' filament next to an axial 'V' filament, or a hemispherical shield under the dipped beam filament - though these bulbs have not been available for many years. In testing, this LED lamp produced a great high and low beam pattern with Lucas 'U' flute style lenses in particular and is the recommended BA15D 'no integral lens' LED lamp upgrade for early headlamps fitted with these lenses, with or without a Bi-flex bar. For 'Difusa' style lenses, we recommend the BA15DLED-H43 style LED, which imitates a twin (unshielded) filament bulb, or BA15DLED-H43L with the integral lens that produces great light output - regardless of reflector condition - and an excellent, defined dipping pattern Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 12 and 24V BA15D bulbs including B171B (12V 36/36W), B1248B (12V 45/35W) and B194 (24V 36/26W - not currently available). Body made from aviation grade aluminium. As noted above, these bulbs don't have an integral lens, so can be used in tripod type lamps. 60mm total bulb height. 25mm max heat sink diameter, 15mm cap diameter.

High performance CSP 1860 LED upgrade for Bosch and Lucas headlamp bulbs with the BA20D base. Integral heatsink. Accepts 5 to 9V input voltage - optimised for 6V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, brighter (LUX measurement at fixed distance) than BT527 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 6V bulbs including BT519, B392B, BT520, B393B, B393H (Halogen), BT521 and BT527. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number BA20DLED-P43 for a 12V, negative earth version. Please see part numbers BA20LED-H30L and BA20LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

High performance CSP 1860 LED upgrade for H4 P45t type bulbs with the Continental, 46mm diameter turreted base with three spade connections. Integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, brighter (LUX measurement at fixed distance) than B904 (45/40W) and comparable with BHB12 (60/55W). The LED layout is designed to match the original H4 filament layout including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 12V bulbs including B904, BHB12 and BHB24. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number P45TLED-H43L for a classic white LED upgrade lamp with an integral lens. 82mm total bulb height.

High quality CSP 1860 LED upgrade for Marchal type bulbs with a double contact BA21D bulb base. With integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B5915 (45/40W) with a classic warm white light. The LED layout is designed to match the original Marchal filament layout including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic white colour temperature. This bulb is a great LED alternative to a number of 12V bulbs including B5914B and B5915B. Made from aviation grade aluminium. These bulbs don't have an integral lens. Please see part number BA21DLED-P30 for a yellow light version of this lamp and part numbers BA21DLED-H25YL and BA21DLED-H30L for LED upgrade lamps with integral lenses. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High quality CSP 1860 LED upgrade for Marchal type bulbs with a double contact BA21D bulb base. With integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, brighter (LUX measurement at fixed distance) than B5915 (45/40W) but with a yellow light. The LED layout is designed to match the original Marchal filament layout including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 3000K yellow colour temperature. This bulb is a great LED alternative to a number of 12V bulbs including B5915BY. Made from aviation grade aluminium. These bulbs don't have an integral lens. Please see part number BA21DLED-P43 for a classic white versions of this lamp and part numbers BA21DLED-H25YL and BA21DLED-H30L for LED upgrade lamps with integral lenses. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High performance CSP 1860 LED upgrade for Bosch and Lucas headlamp bulbs with the BA20D base. Integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B396 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 12 and 24V bulbs including BT529, B394, BT523, B395B, B395H (Halogen), BT528, B396B, BT1524, B399 and BHB24. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number BA20DLED-P43-6N for a 6V, negative earth version. Please see part numbers BA20LED-H30L and BA20LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

High-quality LED upgrade (with built-in mini cooling fan) for H4 lamps with the P43T base. Set of two H4 bulbs.  Flexible application - accepts 9 to 32V input voltage so suitable for 12 or 24V vehicles. Two high-power LEDs on each side provide high and low beam function - specified at over 1800 Lumen high beam and 1800 Lumen low beam, giving over 3600 Lumen combined. In testing, 90% brighter (LUX measurement at a fixed distance) on low beam and over 100% brighter on high beam than B472 (60/55W) with a modern, bright white look. Low current draw - less than 50% of 60/55w halogen bulbs, so great for lower-powered electrical systems. 6000K clean bright, white colour temperature. The latest plug-and-play upgrade for H4 bulbs - modern, powerful, high-performance lighting with reduced current consumption; Estimated lifespan significantly higher than conventional bulbs. The filament layout, including low beam filament shield, produces a good high and low beam pattern - with a clean cut-off and dip pattern observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a very powerful LED upgrade alternative for a number of halogen bulbs including B472 and B475. These bulbs don't have an integral lens so can be used in tripod-type lamps. Total bulb height including wiring/spade connections 80mm, 19 x 42mm LED section. Due to the high-performance nature of the bulb, cooling cannot be achieved with a solid, no moving parts heatsink, hence the incorporation of a cooling fan.

High quality 16 x transverse Cree 2525 (with Hotsink) LED upgrade for SINGLE CONTACT American Pre-focus head and spot lamp bulbs from the '30s and '40s with the P15S 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to single contact APF incandescent bulbs - 6V, 36W part number BA5679 and 12V, 42W part number BA5678. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm SINGLE contact base with 30mm diameter pre-focus plate. For a brighter white version of this bulb please see part number APFLED-S43TR Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for Marchal type head and spot bulbs with a SINGLE contact BA21S bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Two rows of transverse LEDs each side, to recreate the transverse filament arrangement of original bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 2500K yellow colour temperature. This bulb is a great LED upgrade alternative to a number of 6 and 12V single filament bulbs including B5812Y and BT2423. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers BA21LED-H30TR and BA21LED-H43TR for Warm White and bright White versions of this lamp. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with Hotsink) LED upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 double contact base. Extremely flexible application - suitable for 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, ). 3000K warm, white colour temperature. This bulb is a good LED upgrade alternative to a large number of 12V bulbs from 25/25W to 45/45 including BA5676, BA5677, B5679B and BA5600. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm DOUBLE contact base with 30mm diameter pre-focus plate Two designs shown in photos, either design maybe supplied depending on available stock.

Premium high power LED lens lamp upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). 3000K warm white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6 and 12V bulbs from 25/25W to 45/45W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 64mm these are longer than standard APF headlamp type bulbs (at 55mm). For an LED headlamp without a lens please see part number APFLED-H30

Premium high power LED lens lamp upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6 and 12V bulbs from 25/25W to 45/45W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered electrical systems. Allen key is provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb's wiring, by twisting the casting too much relative to the internal workings. With a bulb length of 64mm these are longer than standard APF headlamp type bulbs (at 55mm). For a warm white version of this lamp please see part number APFLED-H30L. For an LED headlamp without a lens,  please see part number APFLED-H30

High-quality 16 x Cree 2525 (with heatsink) BRIGHT WHITE LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern.  One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of higher-wattage 12 and 24V headlamp bulbs including B171B, B1248B and B194. In testing, this LED lamp proved significantly brighter than B1248B 45/35W. Made from aviation-grade aluminium. Please see BA15DLED-H30 for a 3000k, classic white colour. Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36D base. 6 VOLT NEGATIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs such as B6721 type bulbs. In testing, brighter than incandescent bulb rated at 24/30W, more comparable with 36/42W. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. Suitable beam pattern for Tripod headlamps. This bulb is a good LED upgrade alternative for unshielded twin filament 6V bulbs including B6721. It is not a suitable alternative to B306 and B312B as they have shielded filaments - the LED upgrade option for these bulbs is P36DLED-P43-6. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 59mm total bulb height. 12 x 25mm LED section. P36D cap 22mm diameter with 36mm diameter plate. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus headlamp applications with the P36D base. Flexible application - suitable for 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs such as B301 type bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems (800mA at 12V, 1.6A at 6V). 4300K classic, white colour temperature. This bulb is a good LED upgrade alternative to a large number of 12 and 24V bulbs including B301, B404, B332, B354, B350, B358 and B359. In testing this bulb was comparable with 40/45W incandescent bulbs. It is not a suitable alternative to B370, B414B and B437 as they have shielded filaments - the LED upgrade option for these bulbs is P36DLED-P43. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 59mm total bulb height. 12 x 25mm LED section. P36D cap 22mm diameter with 36mm diameter plate. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality LED upgrade (with heatsink) for H4 lamps with the P43T base. Set of two H4 bulbs. Flexible application - accepts 10 to 30V input voltage so suitable for 12 or 24V vehicles. Two high power LEDs on each side provide high and low beam function - specified at over 1500 Lumen high beam and 1500 Lumen low beam giving over 3000 Lumen combined. In testing, 50% brighter on low beam and 20% brighter on high beam than B472 (60/55W) but with a classic yellow light. Very low current draw - less than 40% of 60/55w halogen bulbs, so great for low powered electrical systems (less than 2A at 12V). 3000K warm, yellow colour temperature. Plug and play upgrade for H4 bulbs - powerful, high performance lighting with reduced current consumption. Estimated lifespan significantly higher than conventional bulbs. The filament layout including low beam filament shield produces a good high and low beam pattern - with a clean cut off and dip pattern observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a great LED upgrade alternative to a number of halogen bulbs including B472. Premium construction from aviation grade aluminium. Cooled by a solid heatsink - no fan, so no moving parts. These bulbs don't have an integral lens so can be used in tripod type lamps. Total bulb height including wiring/spade connections 80mm.

High quality LED upgrade with aluminium heatsink for H1 lamps with the P14.5S base. D9 (S) series lamp with two 5530 LEDs rated at 1800 Lumen combined. Replaces a standard H1 bulb in the same size envelope. Flexible application - 12V and 24V input. NEGATIVE EARTH ONLY!  One high power LED on each side of the lamp body. In testing, these lamps proved a bright white light when installed in a 5 3/4" spot lamp. Very low current draw - less than 40% of 55w halogen bulbs, so great for low powered electrical systems. 6000K bright white colour temperature. Plug and play upgrade for H1 bulbs - with a lower space requirement than H1LED-PP30. Powerful, high performance lighting with reduced current consumption in a compact package. Premium construction from aviation grade aluminium. Total LED height 60mm. One 6.3mm spade connection. These lamps can be used with the H1UPGRADE kit to replace British Pre-focus bulbs in some spot lamp.