Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Temperature gauge adaptor to take types of capillary gauge (MOCAL, Racetech, Smiths competition) for fitting into a water hose system. Water hose adapters are machined from billet. Hose...
Low pressure switch that 'makes' when pressure falls below a chosen point. Adjustable within a range of 1.45-14.5psi. With a 1/8NPTF thread to screw into a matching thread on a T piece or tapping...
Low pressure switch that 'makes' when pressure falls below a chosen point. Adjustable within a range of 15 to 120psi - set to 20psi. With a 1/8NPTF thread to screw into a matching thread on a T...
Low pressure switch that 'makes' when pressure falls below a chosen point. Adjustable within a range of 15 to 120psi - set to 35psi. With a 1/8NPTF thread to screw into a matching thread on a T...
With 1/8" NPTF male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/4" NPTF male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/8" BSPTmale thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/2" UNF male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/4" BSP male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 3/8" BSF male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
Male/male adaptor - 1/8" BSP to 1/8" NPTF
Brass Y fitting, used when fitting oil pressure gauge with an oil pressure switch, two 1/8" BSP female threads and one 1/8" BSP male thread, all parallel.
Small brass tap for liquids, gases and vapours. 1/4 inch BSP female connection. Rubber handle cover. Maximum working pressure 25bar, maximum working temperature 50 deg C
Small brass tap for liquids, gases and vapours. 3/8 inch BSP threaded connection. Rubber handle cover. Maximum working pressure 25bar, maximum working temperature 50 deg C