Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Seals

Store
Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

CEP OS P NA128 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B452

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.225 40.1828 9.921875 7/8 1.582 25/64 M/R(4B)
Fits Makes:
N.S.U. Drive Shaft, Lambretta Rear Wheel, Allgaier Various

CEP OS P NA131 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B462

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.003125 47.1932 9.921875 63/64 1.858 25/64 M/R(4B)
Fits Makes:
Scania Vabis Various, Saurer Air Brake, Panhard Gearbox, Magirus Inj Pump, Lancia Steering, Fiat Tractor Pump, Durkopp Blower, Deutz Inj Pump, Bolinder Governor, Alfa-Romeo Compressor

CEP OS P NA132 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B463

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30 47 10 1.181102 1.850394 0.393701 M/R(4B)
Fits Makes:
Scania Vabis Sev. applic., Alfa-Romeo Water pump

CEP OS P NA133 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B470

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32.54375 41.3512 4.7625 1 9/32 1.628 3/16 M/R(B)
Fits Makes:
Triumph m/c. Sev. applic.

CEP OS P NA134 - Oil Seal

From £6.23 (£7.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B471, 5330998819578

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
21.43125 30.226 6.35 27/32 1.19 1/4 M/R(B)
Fits Makes:
Triumph m/c. Mainshaft, B.S.A. m/c. Crankcase

CEP OS P NA135 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B473

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
8 16.27 7 0.314961 0.640551 0.275591 M/R(4B)
Fits Makes:
Rover Gearbox, Mercedes-Benz Fuel inj. pump, Goggomobil Tach. drive, Ford pass. Speedo., B.M.W. Tach. drive, Alfa-Romeo Rev-counter

CEP OS P NA137 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B476

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 28.194 7.14375 5/8 1.11 9/32 M/R(4B)
Fits Makes:
Volvo Gearbox, Saurer Water Pump, Saab Timing Cover, D.K.W. Oper. Shaft, BMW M/c Crankcase

CEP OS P NA140 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B487

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 50.1904 9.921875 1 3/8 1.976 25/64 M/R(4B)
Fits Makes:
Simca Trans. rear, Rover Gearbox primary, Alfa-Romeo Sev. applic.

CEP OS P NA142 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B492

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.84375 35.179 6.35 25/32 1.385 1/4 M/R(3B)
Fits Makes:
Simms Fuel pump, C.A.V. Fuel pump

CEP OS P NA143 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B493

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.08125 35.179 7.9375 19/32 1.385 5/16 M/R(4B)
Fits Makes:
Fiat Steering, D.K.W. Crankshaft

CEP OS P NA144 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B494

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.971875 45.085 9.128125 1 9/64 1.775 23/64 M/F(Std)
Fits Makes:
Simca Rear Axle, Fiat Rear Axle

CEP OS P NA145 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B495

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17.065625 34.2392 3.96875 43/64 1.348 5/32 M/R(3B)
Fits Makes:
Simms Fuel pump, C.A.V. Fuel pump

CEP OS P NA146 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B497

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 44.6532 11.1125 1 1/8 1.758 7/16 M/R(4B)
Fits Makes:
Muirhill Sev. applic., Fordson tractor Sev. applic.

CEP OS P NA149 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B501

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17.4625 28.7782 6.35 11/16 1.133 1/4 M/R(4B)
Fits Makes:
Vauxhall Steering, Cov. Climax Hyd. pump

CEP OS P NA150 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B502

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17.4625 32.004 6.35 11/16 1.26 1/4 M/R(3B)
Fits Makes:
B.S.A. m/c. Gearbox, Ariel m/c. Crankcase

CEP OS P NA151 - Oil Seal

From £8.73 (£10.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B503

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 50.1904 7.14375 1 1/2 1.976 9/32 M/R(4B)
Fits Makes:
Volvo Steering, Singer Gearbox, Skoda Rear hub, Fordson tractor Steering Hillman Gearbox Mercedes-Benz Sev. applic., Dodge truck Gearbox, Commer Gearbox

CEP OS P NA152 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B504

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.06875 56.2102 7.14375 1 21/32 2.213 9/32 M/R(4B)
Fits Makes:
Tempo Front axle, Skoda Rear hub, Opel Timing cover, Mercedes-Benz Water pump, Lancia Timing cover, Ariel m/c. Gearbox

CEP OS P NA153 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B506

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 46 7 0.984252 1.811024 0.275591 M/R(4B)
Fits Makes:
Renault Rear axle, Lambretta Crankshaft

CEP OS P NA154 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B507

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 47.8282 11.1125 1 1/4 1.883 7/16 M/R(4B/DAT)
Fits Makes:
Wolseley Diff. cover, Riley Diff. cover, Morris pass. Diff. cover, M.G. Diff. cover, Austin pass. Diff. cover

CEP OS P NA155 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B509

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 41.275 9.525 1 1/8 1 5/8 3/8 M/L(Std)
Fits Makes:
Triumph pass. Rear axle, Standard comm. Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA157 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B511

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 38.1762 17.4625 1 1.503 11/16
Fits Makes:
Standard comm. Rear axle Triumph pass. Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA158 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B512

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32.54375 50.1904 5.953125 1 9/32 1.976 15/64
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA159 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B515

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32.940625 50.0888 11.90625 1 19/64 1.972 15/32
Fits Makes:
Opel Trans. rear, Ford-Taunus Trans. rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA160 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B516

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.84375 35.0774 7.14375 25/32 1.381 9/32
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA161 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B517

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 24.003 4.7625 5/8 0.945 3/16
Fits Makes:
Wolseley Trans. gear, Riley Trans. gear, Morris Trans. gear, M.G. Trans. gear, Austin Trans. gear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA162 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Ford Zephyr 4 + 6 cylinder rear gearbox ext Seal  Manual only (except automatic)
211E-7657-A

Comparable to other manufacturer part numbers - B521, 211E-7657-A

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 49.5554 13.096875 1 3/8 1.951 33/64
Fits Makes:
Triumph Trans. rear, Ford-Thames Trans. rear, Ford pass. Trans. rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA163 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B522

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1625 47.7012 7.9375 1 3/16 1.878 5/16
Fits Makes:
Leyland Water pump, Bedford Water pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA166 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B530

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1625 47.7012 11.1125 1 3/16 1.878 7/16
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA167 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal GEAR BOX EXT HOUSING

Comparable to other manufacturer part numbers - B532, 105E-7657, 71WG-7657-BA

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1625 43.6372 14.684375 1 3/16 1.718 37/64
Fits Makes:
Reliant Gearbox, Morgan Gearbox ext., Ford-Thames Gearbox, Ford Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA168 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B533

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
18.25625 25.4762 4.7625 23/32 1.003 3/16
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA169 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B534

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32.146875 50.1904 7.9375 1 17/64 1.976 5/16
Fits Makes:
Renault Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA170 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B536

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 49.9872 9.921875 1 1/8 1.968 25/64
Fits Makes:
Simca Gearbox front, Morris Gearbox, Austin Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA171 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B537

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.225 35.0012 4.7625 7/8 1.378 3/16
Fits Makes:
Ford-Thames Gearbox, Ford pass. Gearbox

CEP OS P NA172 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B538, 5330998015014

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
23.8125 38.2524 9.525 15/16 1.506 3/8 M/R(4B)
Fits Makes:
Singer Clutch hsg., Hillman Clutch hsg.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA173 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B539

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 47.8282 9.525 1 1/4 1.883 3/8
Fits Makes:
Singer Drive shaft, Hillman Drive shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA174 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B540

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 47.8282 9.525 1 3/8 1.883 3/8
Fits Makes:
Vauxhall/Bed. Timing cover, Leyland Exhauster
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA175 - Oil Seal

From £21.19 (£25.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B541

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 42.7736 27.78125 1 1/8 1.684 1 3/32
Fits Makes:
Vauxhall Trans. rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA176 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B542

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 44.6532 6.35 1 1.758 1/4
Fits Makes:
Ariel m/c. Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA177 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B543

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28 40 7 1.102362 1.574803 0.275591
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA179 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B589

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9875 41.275 9.525 1 1/16 1 5/8 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA181 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B591

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 46.5074 9.525 1 1/4 1.831 3/8
Fits Makes:
B.S.A. m,'c. Front fork, Arielm/c. Front fork
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA182 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B592

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
23.8125 34.6202 6.35 15/16 1.363 1/4
Fits Makes:
Ford Tractor Diff. lock
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA183 - Oil Seal

From £21.19 (£25.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B593

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9875 47.625 19.05 1 1/16 1 7/8 3/4
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA184 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B594, B165

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 39.751 9.525 1 1/8 1.565 3/8
Fits Makes:
Massey-Ferguson Trans. drive, Ford Tractor Brake pedal shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA185 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B595

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 39.751 6.35 1 1/8 1.565 1/4
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA187 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B597

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.225 46.0248 9.525 7/8 1.812 3/8
Fits Makes:
Rootes Aux. drive, Perkins Aux. drive, Massey-Ferguson Aux. drive, Dodge Aux. drive
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA188 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B598

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.225 41.275 9.525 7/8 1 5/8 3/8
Fits Makes:
Ford Gearbox, front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA192 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B602

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9875 37.0078 7.14375 1 1/16 1.457 9/32
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA193 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B603

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
13.890625 25.4762 3.175 35/64 1.003 1/8
Fits Makes:
Ford Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA195 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B605

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28 40 8 1.102362 1.574803 0.314961
Fits Makes:
Ford Trans. front

CEP OS P NA196 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B606, 5330998018998

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38 50.7 4.7 1.496063 1.996063 0.185039 M/R(4B)
Fits Makes:
Vauxhall Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA197 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B607

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 38.18 6.3 1.122047 1.50315 0.248031
Fits Makes:
Triumph Trans. input, Standard Trans. input
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA198 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B608

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
6.3 16 4.7 0.248031 0.629921 0.185039
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA199 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B609

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 44.5 6.3 1.248031 1.751969 0.248031
Fits Makes:
Rootes Gearbox, front, Hillman Gearbox, front

CEP OS P NA201 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B612

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20 47.08 12.7 0.787402 1.853543 1/2 M/R(4B/DAT)
Fits Makes:
Fordson tractor Aux. drive, Ford-Thames Aux. drive
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA202 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B613

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.6 42.8 24.9 1.125984 1.685039 0.980315
Fits Makes:
Vauxhall Gearbox, rear ext.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA203 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B614

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26 47 10 1.023622 1.850394 0.393701
Fits Makes:
Triumph Rear axle, inner, B.M.C. Rearaxle,inner

CEP OS P NA205 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C102

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 50.9 12.7 1.122047 2.003937 1/2 M/L(Std)
Fits Makes:
Winget Drum pinion, Wilson elect Rear axle, Vickers tractor Pulley, Lister Se11. applic, Daimler pass. Fan, Aston Martin Water pump, Armstrong Sidd. Gearbox

CEP OS P NA207 - Oil seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal Reliant 850 Front main

Comparable to other manufacturer part numbers - C106

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 50.9 12.7 1.374016 2.003937 1/2 M/L(Std)
Fits Makes:
Singer Gearbox, Reliant Sev. applic, Austin Healey Pinion, Austin Sev. applic.

CEP OS P NA210 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C118

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9 55.65 11.1 1.059055 2.190945 0.437008 M/L(Std)
Fits Makes:
Sunbeam Rear Axle, Leyland Crankshaft, Hillman Rear Axle, Commer Rear Axle, Albion Crankshaft

CEP OS P NA211 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C120

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 76.23 12.7 2 3.001181 1/2 M/L(Std)
Fits Makes:
Waukesha Access. drive, Thornycroft Gearbox, Riley Crankshaft, Reo Timing cover, Ransome trac. Diff. brg., Oliver-Cletrac Rear axle, Maudslay Wormshaft, Massey-Ferguson Sev. applic., Lister Clutch, Leyland Gearbox, Karrier Prop. shaft, International Sev. applic., Hough Hoist, Hands trailer Axle, Fowler tractor Trans., Cummins Water pump, Continental Sev. applic., Commer Prop. shaft, Clark Pinion, Caterpillar Sev. applic., Case Trans. shift, Buick Timing cover, Bucyrus Erie Timing cover, Austin-Western P.T.O., Austin Rear hub

CEP OS P NA212 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C121

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 57.25 12.7 1.248031 2.253937 1/2 M/L(Std)
Fits Makes:
Wilson elect. Wormshaft, Trojan Gearbox, Singer Rear hub, S & D. Fuel pump, Rover Rear axle, Minne·Moline Input shaft, Massey-Ferguson Table lift, Leyland Dynamo, Lagonda Water pump, Holder Rear axle, Hi-way trailer Axle, C.A.V. Dynamo, Brush Wormshaft, Austin comm. Pinion, Armstrong Sidd. Gearbox, Allis Chalmers Gearbox, Albion Fuel pump

CEP OS P NA213 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C122

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 57.25 12.7 1.374016 2.253937 1/2 M/L(Std)
Fits Makes:
Vickers tractor Sev applic., Triumph pass. Rear axle, Standard Rear axle, Rover Sev. applic., Marshall tractor P.T.O. Massey-Ferguson Sev. applic., Leyland Fan brg., Lanchester Pinion, Karrier Conveyor, Jowett Timing cover, Jaguar Rear axle, Fowler tractor P.T.O., Dorman Fuel pump, Crofts Red. gear, Clark Trans., Case P.T.O., Cadillac Rear axle, Aston Martin Gearbox, Armstrong Sidd. Gearbox, Allis Chalmers Gearbox

CEP OS P NA214 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C125

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 57.25 12.7 1 1/2 2.253937 1/2 M/L(Std)
Fits Makes:
Waukesha Access Drive, Turner Trac. Rear Axle, Singer Gearbox, Perkins Aux Drive, Morris Com Rear Axle, Min. Moline Crankshaft, Massey Ferg P.T.O., Loyd Tractor P.T.O., Leyland Various, Lagonda Rear Axle, Karrier Rotor Case, International Magneto, Hands Trailer Axle, Galion Hyd Pump, Austin Diff Shaft

CEP OS P NA215 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C126

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.7 57.25 12.7 1.562992 2.253937 1/2 M/L(Std)
Fits Makes:
Sunbeam pass. Gearbox, Morris comm. Front axle, Humber Gearbox, Hillman Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA216 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C130, C129, 53300998214302

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 60.42 12.7 1.374016 2.37874 1/2
Fits Makes:
Wisconsin Red. gear, White Pinion, Twin Disc Drive shaft, Towmotor Drive axle, Timken Sev applic., Studebaker Pinion, Riley Gearbox, Reo Pinion, Oliver-Cletrac Sev. applic., Morgan Sev. applic., Minne-Moline Sev. applic., Mack Sev. applic., Jaeger Trans. input, International Sev. applic., Hudson Speedo., Hough Sev. applic., Hi-way trailer Axle, G.M.C. truck Sev. applic., Ford truck Pinion, E.N.V. axle Rear axle, Electricar Rear axle, Eaton axle Pinion, Dodge truck Sev. applic., Cummins Compress., Commer P.T.O., Chevrolet trk. Sev. applic., Case Sev. applic., Athey Pinion, Aston Martin Rear hub, Armstrong Sidd. Front brg., Alvis Rear axle, Allis Chalmers Sev. Applic

CEP OS P NA217 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C134

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 60.42 12.7 1 1/2 2.37874 1/2 M/L(Std)
Fits Makes:
alternative use ref NA440t, Wolseley Gearbox, Waukesha Fan drive, Timken Sev. applic, Thornycroft Wormshaft, Studebaker Pinion, Seddor Pinion, Riley Gearbox, Pontiac. Rear axle, Packard Rear axle, Oliver Cletrac Sev. applic., Oldsmobile Rear axle, Morns Gearbox, Minne Moline Sev. applic, Massey-Ferguson Sev. applic, Mack Sev. Applic, Leyland Clutch, Le T ourneau Clutch, Lea-Francis Gearbox, Lanchester Gearbox, lnternat tractor Sev. applic, Humber Gearbox, Hough Sev. appllc, Hillman Gearbox, G.M C. truck Pinion, Galion Trans., E.R.F. Wormshaft, Electricar Wormshaft, Dodge . Sev. applic, Daimler pass. Gearbox, rear, Cummins Fuel pump, Chevrolet trk. Sev. applic., Caterpillar Sev. applic., Cadillac Rear axle, Buckeye Pinion, Allis Chalmers Pinion

CEP OS P NA219 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C142

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.2 60.42 12.7 1.622047 2.37874 1/2 M/L(Std)
Fits Makes:
Wilson El. Rear Hub, Waukesha Crankshaft, Timken Axle Pinion, Studebaker Pinion, Spicer Trans. Drive, Reo Pinion, Morris Com Front Axle, Morgan Rear Hub, Massey Ferg Front Cover, Jaeger Transmission, International Trans. Rear, Humber Rear Axle, GMC Trans. Front, Diamond T Pinion, Daimler Com Camshaft, Commer P.T.O., Buckeye Pinion, Bedford Rear Axle, Austin Various
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA220 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C148

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 60.42 12.7 1.751969 2.37874 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA222 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C155

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 62 7.6 1.874016 2.440945 0.299213
Fits Makes:
Morns Rear hub, M.G Rear hub

CEP OS P NA223 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C165

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6 63.65 12.7 1.559055 2.505906 1/2 M/L(Std)
Fits Makes:
Wisconsin Red gear, Willys Sev. applic, Twin Disc Output shaft, Sunbeam pass. Pinion, N.C.B. elect Spur pinion, Lanchester Rear hub, International Sev. applic., Ford military Transfer box, Electricar Spur pinion, Daimler Rear hub, Cockshutt P.T.O., Brush elect. Spur pinion, Austin-Western Prop. shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA224 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C167

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 63.65 12.7 1.625984 2.505906 1/2
Fits Makes:
Vauxhall Rear axle, Trojan Gearbox, Stacatruc Drve shaft, Rover Sev. applic., N.C.B. elect Rear axle shaft, Minne-Moline Sev. applic., Massey-Ferguson Sev. applic., Hough Rearax~, Elect-ojan Gearbox, rear, Benford Pump, Bedford Rear axle, Aston Martin Gearbox, Armstrong Sidd, Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA225 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C168

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 63.65 12.7 1.625984 2.505906 1/2

CEP OS P NA226 - Oil Seal

From £2.49 (£2.99 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C170

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.45 63.627 12.7 1 3/4 2.505 1/2 M/L(Std)
Fits Makes:
Morris comm. Front axle, Mack Steering, Loyd tractor Gearbox, Lister Crankshaft, Guy Rear axle, G.M.C truck Sev. applic., Dodge truck Rear axle, Crossley Gearbox, Caterpillar Front axle, Austin pass. Prop. shaft, Allis Chalmers Steering, Albion Prop. shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA227 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C172, NA476

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 63.65 12.7 1.874016 2.505906 1/2
Fits Makes:
alternative use ref NA476t, Wolseley Pinion, Moss ' Gearbox, Morris comm Sev. applic., Dodge truck Pinion, Dennis Gearbox, rear, Austin Sev. applic., Albion Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA228 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C173

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 63.65 12.7 1 1/2 2.505906 1/2
Fits Makes:
Wilson elec. Sev applic., Twin Disc Rev shaft, Timken Sev applic., Tilling Stevens Pinion, Scammell Sev. applic., Riley Pinion, Reliant Timing cover, Ransome tractor Driving hub, Oliver Cletrac Sev. applic., Plymouth Rear axle, inner, Packard Rear hub, N.C.B. elec Rear axle, Nash Rear axle, Mercury pass. Rear hub, Lincoln Rear hub, Lea-Francis Gearbox, Karrier Rotor top, Humber Pinion, Hough Transfer, Hi-way trailer Axle, Hercules Water pump, Helecs elec. Rear axle, Hands trailer Axle, G.M.C.truck Rearhub, Galion Transfer box, Ford-Thames Rear hub, Ford Rear hub, E.R.F. Steering, Edsei Rear hub, Eagle trailer Axle, Clark Sev applic, Chrysler Rear axle, nner, Buda Fuel pump, Brush elec. Rear axle, Armstrong Sidd Clutch end Austin-Western Sev applic., Allis Chalmers Bevel gear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA230 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C185

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46 66.78 12.7 1.811024 2.629134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA231 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C193

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8 68.35 12.7 1.685039 2.690945 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA232 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C194

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 68.35 12.7 1.751969 2.690945 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA233 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C199

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 69.95 12.7 1.625984 2.753937 1/2
Fits Makes:
Surbeam pass. Pinion, Singer Pinion, Karner Gearbox, Humber Sev. applic, Hillman Rear axle, Dodge truck Sev. applic, • Commer Sev. applic, Austin-Western Rear wheel, Ailsa Craig
Product Image

CEP OS P NA234 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C201

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.2 62.13 22.23 1.622047 2.446063 0.875197
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA235 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C203, 5330994594419

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 69.95 12.7 1.751969 2.753937 1/2
Fits Makes:
Wisconsin Sev applic., Winget Bevel pinion, Willys PTO, Vickers tractor Red. gear, Twin Disc Output shaft, Turner-tractor C,utct,, Tasker T raile- Axle, Rover Sev. Applic, Reliant Rear hub, Ransome Sev Applic, MmneMoline Clutcb _, Lagonda, Jaeger Trans nput, International Sev applic, Hough Sev, Applic, Guy Sev. applic., G M C truck Sev appnc, Galion Clutch, E.N V. axle Rear ax'e, Dorman Crankcase, Dodge truck P T.O, County tractor P T. 0., Chevrolet truck Sev, applic., Caterpillar Steering, Benford, Aust n Sev. applic, Armst·ong Sidd. Pinion

CEP OS P NA236 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C205

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 69.95 12.7 1.874016 2.753937 1/2 M/L(Std)
Fits Makes:
Thornycroft Sev. Applic, Standard Rear hub, Rover Rear hub, Riley Front hub, Meadows Crankshaft, Massey Ferguson Wheel axle, Karner Driving shaft, Jaguar Rear hub, E.N.V.axle Rear hub, Daimler pass. Rear hub, Commer Rec.r axle, Caterpillar Sev applic, Armstrong Sidd. Sev, applic, Alvis Sev Applic
Product Image

CEP OS P NA237 - Oil Seal

From £43.62 (£52.34 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C213

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 147.62 26.2 2 5.811811 1.031496 M/L(Spec.)
Fits Makes:
Bedford Piruon
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA238 - Oil Seal

From £18.63 (£22.36 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C214

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.95 6.3 2 2.753937 0.248031

CEP OS P NA239 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C216

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 71.53 7.9 1.874016 2.816142 0.311024 M/L(Std)
Fits Makes:
Rover Sev. Applic
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA241 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C222

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 73.13 12.7 1.751969 2.879134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA242 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C224

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 73.02 12.7 1.751969 2.874803 1/2
Fits Makes:
A.E.C. Prop shaft
Product Image

CEP OS P NA243 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C225

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 109.52 11.9 1.751969 4.311811 0.468504
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA244 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C226

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 73.13 12.7 1.625984 2.879134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA245 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C227

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 73.13 12.7 1.874016 2.879134 1/2
Fits Makes:
Timken axle F & R. axle, Reliant Rear hub, Massey-Ferguson Trans,, Mack Rear axle, Loyd tractor Bevel pinion, Leyland Rear axle, International Sev. applic, Hough P.T.O, Hercules Timing cover, Eaton axle Pinion, Commer Rear axle, Allis Chalmers Sev. applic

CEP OS P NA246 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C229

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 73.1266 12.7 2 2.879 1/2 M/L(Std)
Fits Makes:
Turner Output cplg., Timken Front axle, Thornycroft Pinion, Riley Rear hub, Reo Front axle, Packard Timing cover, Oliver-Cletrac Sev. applic, Massey- Ferguson Sev. applic , Lanchester Front & rear hubs, International Sev appli,, Humber Rear axle, Hough Transfer drive, G.M.C rrlitary Front axte, Dodge truck Puuon, Daimler pass Front hub, Continental Access drive, Clark axle Differential, Caterpillar Sev. applic., Bolinder Pulley, Aveling-Barford Conveyor, Allis Chalmers Sev applic.

CEP OS P NA247 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C233

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.975 73.1266 17.4625 2 1/8 2.879 11/16 M/L/L(DB)
Fits Makes:
Studebaker Trans. rear, Moss Trans. rear, Morris Comm. Trans. rear, Internal. truck Trans. rear, G.M.C. truck Trans. rear, Dodge truck Trans. rear, Clark Trans. rear, Chevrolet truck Trans. rear, B.M.C. Trans. rear, Bedford Trans. rear, Austin Comm. Trans. rear
Product Image

CEP OS P NA248 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Sunbeam pass. Rear hub, Humber Rear hub, Hillman Rear hub, Commer Rear hub

Comparable to other manufacturer part numbers - C244

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8 68.33 13.5 1.685039 2.690157 0.531496
Fits Makes:
Sunbeam pass. Rear hub, Humber Rear hub, Hillman Rear hub, Commer Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA249 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C245

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8 63.6 6.3 1.685039 2.503937 0.248031
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA250 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C246

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.93 12.7 2 2.75315 1/2
Fits Makes:
Winget Drum pinion, Triumph pass. Rear hub, Thornycroft Gearbox, Standard Rear hub, Morris comm. Sev. applic., Jaguar Rear hub, Jaeger Trans. input, Ford tractor Rear axle, David Brown Timing cover, Austin Sev. applic., A.E.C. R.A. brake cam

CEP OS P NA251 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C252

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 69.9516 9.525 1 7/8 2.754 3/8 M/R(Std)
Fits Makes:
Salisbury axle Rear hub, Jaguar Rear hub, Guy Wormshaft, Foden Front axle, Commer Gearbox front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA252 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C255

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 73.13 12.7 2.122047 2.879134 1/2
Fits Makes:
Seddon Gearbox, Moss Gearbox, Massey Ferguson Rear axle , Karrier Gearbox, Dodge truck Gearbox, Dennis Gearbox, B.U.T. Steering
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA253 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C265

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 57.23 7.9 1 1/2 2.25315 0.311024
Fits Makes:
M.G. Front hub, Marshall tractor Sev. applic., Leyland Front axle, Fowler tractor Fan, Dennis Fan
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA255 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C272

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 66.78 9.5 1.874016 2.629134 0.374016